[1] [1] SOUTIS C. Fibre reinforced composites in aircraft construction［J］. Progress in Aerospace Sciences,2005,41(2):143-151.

[2] [2] WANG F J, WANG D, YIN J W, et al. Analysis of surface damage formation mechanism in milling of CFRPs［J］. Journal of Mechanical Engineering,2019,55(13):195-204(in Chinese).

[3] [3] YOUSSEF H A, EL-HOFY H A, ABDELAZIZ A M, et al. Accuracy and surface quality of abrasive waterjet machined CFRP composites［J］. Journal of Composite Materials, 2021,55(12):1693-1703.

[4] [4] CHEN Zh W, RUAN X F, ZOU J L, et al. Surface roughness tests of CFRP cutting by AWJ［J］. China Mechanical Engineering,2019,30(11):1315-1321(in Chinese).

[5] [5] IQBAL A, ZHAO G L, ZAINI J, et al. CFRP drilling under throttle and evaporative cryogenic cooling and micro-lubrication［J］. Composite Structures,2021,267:113916.

[6] [6] HABIB S, OKADA A. Influence of electrical discharge machining parameters on cutting parameters of carbon fiber reinforced plastic［J］. Machining Science and Technology, 2016, 20(1):99-114.

[7] [7] HAN L, ZHANG J J, LIU Y, et al. Effect of fiber orientation on depth sensing intra-laminar failure of unidirectional CFRP under nano-scratching［J］. Composites Part,2021,B224:109211.

[8] [8] GAO Y F, YANG X, XIAO J H, et al. The development of an ultrasonic vibration hand-held pneumatic drill for hole-machining on CFRP composite materials［J］. The International Journal of Advanced Manufacturing Technology, 2021,114(5/6):1635-1652.

[9] [9] HEJJAJI A, SINGH D, KUBHER S, et al. Machining damage in FRPs: laser versus conventional drilling［J］. Composites Part,2016, A82:42-52.

[10] [10] YE Y Y, JIA Sh H, XU Z F, et al. Research on hole drilling in carbon fiber reinforced composite by using laser cutting method［J］. Aeronautical Manufacturing Technology,2019,62(18):50-55(in Chinese).

[11] [11] EL-HOFY M H, EL-HOFY H. Laser beam machining of carbon fiber reinforced composites: A review［J］. The International Journal of Advanced Manufacturing Technology,2019,101(9/12):2965-2975.

[12] [12] LEONE C, MINGIONE E, GENNA S. Laser cutting of CFRP by quasi-continuous wave (QCW) fibre laser: Effect of process parameters and analysis of the HAZ index［J］. Composites Part,2021,B224:109146.

[13] [13] RIVEIRO A, QUINTERO F, LUSQUINOS F, et al. Laser cutting of carbon fiber composite materials［C］//7th Manufacturing-Engineering-Society International Conference (MESIC). Vigo, Spain: Elsevier Science,2017,13:388-395.

[14] [14] LEONE C, GENNA S. Heat affected zone extension in pulsed Nd∶YAG laser cutting of CFRP［J］. Composites Part,2018,B140:174-182.

[15] [15] SOBRI S A, HEINEMANN R, WHITEHEAD D. Development of laser drilling Strategy for thick carbon fibre reinforced polymer composites (CFRP)［J］. Polymers,2020,12(11):2674.

[16] [16] TANGWARODOMNUKUN V, CHEN H Y. Laser ablation of PMMA in air, water, and ethanol environments［J］. Materials and Manufacturing Processes,2015,30(5):685-691.

[17] [17] ZHANG B T, ZHOU L, JIAO H, et al. Research on effect of laser machining of CFRP with different cooling methods［J］. Laser Technology, 2023, 47(2):253-259(in Chinese).

[18] [18] WEE L M, KHOONG L E, TAN C W, et al. Solvent-assisted laser drilling of silicon carbide［J］. International Journal of Applied Ceramic Technology, 2011,8(6):1263-1276.

[19] [19] GUO Z F, GUO B, ZHAO Q L, et al. Optimisation of spray-mist-assisted laser machining of micro-structures on CVD diamond coating surfaces［J］. Ceramics International,2021,47(15):22108-22120.

[20] [20] GEIGER M, BECKER W, REBHAN T, et al. Increase of efficiency for the XeCl excimer laser ablation of ceramics［J］. Applied Surface Science,1996,96(8):309-315.

[21] [21] KUMARAN S T, KO T J, LI C P, et al. Rotary ultrasonic machining of woven CFRP composite in a cryogenic environment［J］. Journal of Alloys and Compounds,2017,698:984-993.

[22] [22] LI H N, YE Y X, DU T T, et al. The effect of thermal damage on mechanical strengths of CFRP cut with different pulse-width lasers［J］. Optics and Laser Technology, 2022,153:108219.

[23] [23] WEI Ch. The study on pretreatment od diamond coated cemented carbide substrate based on the coupling of spray cooling and laser etching［D］. Hefei: Anhui Jianzhu University,2020:42-62(in Chinese).

[24] [24] QI L T, LIU F C, ZHANG Y D. Experimental investigation on 266nm ultraviolet solid-state laser cutting of carbon fiber reinforced plastics［J］. Laser Technology,2022,46(3):402-407(in Chinese).

[25] [25] LI Y Y. Experimental design and data processing［M］. 3rd ed. Beijing: Chemical Industry Press, 2008:104-136(in Chinese)