[1] [1] Holmberg K and Erdemir A 2017 Influence of tribology on global energy consumption, costs and emissionsFriction5263–84

[2] [2] Li M Jet al2022 Super-wetting interfaces as a multiphase composite prototype for ultra-low frictionGreen Chem.247492–9

[3] [3] Liang X L, Liu Z Q, Wang B, Wang C J and Cheung C F 2023 Friction behaviors in the metal cutting process: state of the art and future perspectivesInt. J. Extrem. Manuf.5012002

[4] [4] He B, Chen W and Jane Wang Q 2008 Surface texture effect on friction of a microtextured poly(dimethylsiloxane) (PDMS)Tribol. Lett.31187–97

[5] [5] Shinkarenko A, Kligerman Y and Etsion I 2009 The effect of surface texturing in soft elasto-hydrodynamic lubricationTribol. Int.42284–92

[6] [6] Zhou L, Kato K, Umehara N and Miyake Y 2000 Friction and wear properties of hard coating materials on textured hard disk slidersWear243133–9

[7] [7] Hamilton D B, Walowit J A and Allen C M 1966 A theory of lubrication by microirregularitiesJ. Basic Eng.88177–85

[8] [8] Anno J N, Walowit J A and Allen C M 1968 Microasperity lubricationJ. Lubr. Technol.90351–5

[9] [9] Anno J N, Walowit J A and Allen C M 1969 Load support and leakage from microasperity-lubricated face sealsJ. Lubr. Technol.91726–31

[10] [10] Willis E 1986 Surface finish in relation to cylinder linersWear109351–66

[11] [11] Marian M, Almqvist A, Rosenkranz A and Fillon M 2022 Numerical micro-texture optimization for lubricated contacts—a critical discussionFriction101772–809

[12] [12] Ma R, Zhang X D, Sutherland D, Bochenkov V and Deng S K 2024 Nanofabrication of nanostructure lattices: from high-quality large patterns to precise hybrid unitsInt. J. Extrem. Manuf.6062004

[13] [13] Lian Z X, Zhou J H, Ren W F, Chen F Z, Xu J K, Tian Y L and Yu H D 2024 Recent progress in bio-inspired macrostructure array materials with special wettability—from surface engineering to functional applicationsInt. J. Extrem. Manuf.6012008

[14] [14] Lu P and Wood R J K 2020 Tribological performance of surface texturing in mechanical applications—a reviewSurf. Topogr.: Metrol. Prop.8043001

[15] [15] Wang H H, Lin N M, Yuan S, Liu Z Q, Yu Y, Zeng Q F, Li D Y, Fan J F and Wu Y C 2023 Numerical simulation on hydrodynamic lubrication performance of bionic multi-scale composite textures inspired by surface patterns ofsubcrenataandclamshellsTribol. Int.181108335

[16] [16] Lu P, Wood R J K, Gee M G, Wang L and Pfleging W 2018 A novel surface texture shape for directional friction controlTribol. Lett.6651

[17] [17] Xu Y F, Zheng Q, Abuflaha R, Olson D, Furlong O, You T, Zhang Q Q, Hu X G and Tysoe W T 2019 Influence of dimple shape on tribofilm formation and tribological properties of textured surfaces under full and starved lubricationTribol. Int.136267–75

[18] [18] Romano J M, Garcia-Giron A, Penchev P and Dimov S 2018 Triangular laser-induced submicron textures for functionalising stainless steel surfacesAppl. Surf. Sci.440162–9

[19] [19] Liu W L, Ni H J, Chen H L and Wang P 2019 Numerical simulation and experimental investigation on tribological performance of micro-dimples textured surface under hydrodynamic lubricationInt. J. Mech. Sci.163105095

[20] [20] Wakuda M, Yamauchi Y, Kanzaki S and Yasuda Y 2003 Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contactWear254356–63

[21] [21] Choi Y and Lee J 2015 A study on the effects of surface dimple geometry on fretting fatigue performanceInt. J. Precis. Eng. Manuf.16707–13

[22] [22] Schneider J, Braun D and Greiner C 2017 Laser textured surfaces for mixed lubrication: influence of aspect ratio, textured area and dimple arrangementLubricants532

[23] [23] Braun D, Greiner C, Schneider J and Gumbsch P 2014 Efficiency of laser surface texturing in the reduction of friction under mixed lubricationTribol. Int.77142–7

[24] [24] Hua X J, Puoza J C, Zhang P Y, Xie X and Yin B F 2017 Experimental analysis of grease friction properties on sliding textured surfacesLubricants542

[25] [25] Pettersson U and Jacobson S 2003 Influence of surface texture on boundary lubricated sliding contactsTribol. Int.36857–64

[26] [26] Arslan A, Masjuki H H, Kalam M A, Varman M, Mufti R A, Mosarof M H, Khuong L S and Quazi M M 2016 Surface texture manufacturing techniques and tribological effect of surface texturing on cutting tool performance: a reviewCrit. Rev. Solid State Mater. Sci.41447–81

[27] [27] Vo T D, Deng G Y, Tieu A K, Su L H, Wu X T, Nguyen C, Wexler D and Yang J 2023 Excellent tribological performance at elevated temperatures and associated mechanisms of novel AlCoCrFeNi-MoS2 solid self-lubricating compositeTribol. Int.189109011

[28] [28] Souza de Carvalho M J, Rudolf Seidl P, Pereira Belchior C R and Ricardo Sodr J 2010 Lubricant viscosity and viscosity improver additive effects on diesel fuel economyTribol. Int.432298–302

[29] [29] Aurelian F, Patrick M and Mohamed H 2011 Wall slip effects in (elasto) hydrodynamic journal bearingsTribol. Int.44868–77

[30] [30] Chen M, Briscoe W H, Armes S P and Klein J 2009 Lubrication at physiological pressures by polyzwitterionic brushesScience3231698–701

[31] [31] Li R, Zhang X R, Zeng C, Yang P A, Shou M J, Zhu D, Cao Z F, Xie H Q and Lee C H 2023 Magneto-controlled friction behaviors of magnetorheological elastomers with cosine-shaped surface structureTribol. Int.186108658

[32] [32] Resendiz J, Egberts P and Park S S 2018 Tribological behavior of multi-scaled patterned surfaces machined through inclined end milling and micro shot blastingTribol. Lett.66132

[33] [33] Kang J J, Wang M Z, Yue W, Fu Z Q, Zhu L N, She D S and Wang C B 2019 Tribological behavior of titanium alloy treated by nitriding and surface texturing composite technologyMaterials12301

[34] [34] Li Y L, Li M X, Utaka Y, Yang C J and Wang M 2020 Effect of copper surface modification applied by combined modification of metal vapor vacuum arc ion implantation and laser texturing on anti-frosting propertyEnergy Build223110132

[35] [35] Costa H L and Hutchings I M 2015 Some innovative surface texturing techniques for tribological purposesProc. Inst. Mech. Eng. J229429–48

[36] [36] Mao B, Siddaiah A, Liao Y L and Menezes P L 2020 Laser surface texturing and related techniques for enhancing tribological performance of engineering materials: a reviewJ. Manuf. Process.53153–73

[37] [37] Shi Z, Duan X F, Chen Z H, Liu B, Fu H, Ji J H and Zhang Y H 2024 Precision fabrication of micro-textures array for surface functionalization using picosecond pulse laserOpt. Laser Technol.177111200

[38] [38] Kawabata S, Bai S, Obata K, Miyaji G and Sugioka K 2023 Two-dimensional laser-induced periodic surface structures formed on crystalline silicon by GHz burst mode femtosecond laser pulsesInt. J. Extrem. Manuf.5015004

[39] [39] Zwahr C, Serey N, Nitschke L, Bischoff C, Rdel U, Meyer A, Zhu P H and Pfleging W 2023 Targeting new ways for large-scale, high-speed surface functionalization using direct laser interference patterning in a roll-to-roll processInt. J. Extrem. Manuf.5035006

[40] [40] Li H Y, Xu W H, Li L Q, Xia H B, Chen X, Chen B, Song X G and Tan C W 2022 Enhancing the wettability for 4043 aluminum alloy on 301L stainless steel via chemical-etched surface texturingJ. Mater. Process. Technol.305117577

[41] [41] Liu X F, Wu D B, Zhang J H, Hu X Y and Cui P 2019 Analysis of surface texturing in radial ultrasonic vibration-assisted turningJ. Mater. Process. Technol.267186–95

[42] [42] Zhu L D, Ni C B, Yang Z C and Liu C F 2019 Investigations of micro-textured surface generation mechanism and tribological properties in ultrasonic vibration-assisted milling of Ti-6Al-4VPrecis. Eng.57229–43

[43] [43] Mao B, Siddaiah A, Menezes P L and Liao Y L 2018 Surface texturing by indirect laser shock surface patterning for manipulated friction coefficientJ. Mater. Process. Technol.257227–33

[44] [44] Meng Y, Deng J X, Lu Y, Wang S J, Wu J X and Sun W 2021 Fabrication of AlTiN coatings deposited on the ultrasonic rolling textured substrates for improving coatings adhesion strengthAppl. Surf. Sci.550149394

[45] [45] Lu W L, Zhai W Z, Wang J, Liu X J, Zhou L P, Ibrahim A M M, Li X C, Lin D and Wang Y M 2021 Additive manufacturing of isotropic-grained, high-strength and high-ductility copper alloysAddit. Manuf.38101751

[46] [46] Studart A R 2016 Additive manufacturing of biologically-inspired materialsChem. Soc. Rev.45359–76

[47] [47] Ranjan P and Hiremath S S 2019 Role of textured tool in improving machining performance: a reviewJ. Manuf. Process.4347–73

[48] [48] Spear J C, Ewers B W and Batteas J D 2015 2D-nanomaterials for controlling friction and wear at interfacesNano Today10301–14

[49] [49] Akhtar S S 2021 A critical review on self-lubricating ceramic-composite cutting toolsCeram. Int.4720745–67

[50] [50] Gropper D, Harvey T J and Wang L 2018 Numerical analysis and optimization of surface textures for a tilting pad thrust bearingTribol. Int.124134–44

[51] [51] Li Z, Wang J M, Zhang H, Chen J and Liu K 2020 Influence of surface topography on the friction and dynamic characteristics of spur gearsProc. Inst. Mech. Eng. J2341892–907

[52] [52] Shen C and Khonsari M M 2016 The effect of laser machined pockets on the lubrication of piston ring prototypesTribol. Int.101273–83

[53] [53] Ge D L, Deng J X, Duan R, Liu Y Y, Li X M and Yue H Z 2019 Effect of micro-textures on cutting fluid lubrication of cemented carbide toolsInt. J. Adv. Manuf. Technol.1033887–99

[54] [54] Liu Y Y, Zhu Q, Wang C Y and Li J Q 2023 Tribological behavior of CoCrMo artificial knee joint with symmetrically biomimetic textured surfaces on PEEKOpt. Laser Technol.157108774

[55] [55] Yu X Q, He S and Cai R L 2002 Frictional characteristics of mechanical seals with a laser-textured seal faceJ. Mater. Process. Technol.129463–6

[56] [56] Aymard A, Delplanque E, Dalmas D and Scheibert J 2024 Designing metainterfaces with specified friction lawsScience383200–4

[57] [57] Dongming G 2024 High-performance manufacturingInt. J. Extrem. Manuf.6060201

[58] [58] Zhang H, Hua M, Dong G Z, Zhang D Y, Chen W J and Dong G N 2017 Optimization of texture shape based on genetic algorithm under unidirectional slidingTribol. Int.115222–32

[59] [59] Gtz J, Alvarez Rueda A, Ruttloff S, Kuna L, Belegratis M, Palfinger U, Nees D, Hartmann P and Stadlober B 2022 Finite element simulations of filling and demolding in roll-to-roll UV nanoimprinting of micro-and nanopatternsACS Appl. Nano Mater.53434–49

[60] [60] Han Y L, Sun J N, Xu J W, Zhang Y, Xiao Q H, Jing H, Chen B X, Kong X W, Cabezudo N and Zhang L 2024 Direct 3D printing functional surfaces stacked with microstructured filamentsAddit. Manuf.79103900

[61] [61] Liu Y Y, Liu L L, Deng J X, Meng R, Zou X Q and Wu F F 2017 Fabrication of micro-scale textured grooves on green ZrO2 ceramics by pulsed laser ablationCeram. Int.436519–31

[62] [62] Gropper D, Wang L and Harvey T J 2016 Hydrodynamic lubrication of textured surfaces: a review of modeling techniques and key findingsTribol. Int.94509–29

[63] [63] Gachot C, Rosenkranz A, Hsu S M and Costa H L 2017 A critical assessment of surface texturing for friction and wear improvementWear372–37321–41

[64] [64] Wu Z, Bao H, Xing Y Q and Liu L 2021 Tribological characteristics and advanced processing methods of textured surfaces: a reviewInt. J. Adv. Manuf. Technol.1141241–77

[65] [65] Rosenkranz A, Grtzmacher P G, Gachot C and Costa H L 2019 Surface texturing in machine elements−a critical discussion for rolling and sliding contactsAdv. Eng. Mater.211900194

[66] [66] Rosenkranz A, Costa H L, Baykara M Z and Martini A 2021 Synergetic effects of surface texturing and solid lubricants to tailor friction and wear–a reviewTribol. Int.155106792

[67] [67] Wang X M, Li C H, Zhang Y B, Said Z, Debnath S, Sharma S, Yang M and Gao T 2022 Influence of texture shape and arrangement on nanofluid minimum quantity lubrication turningInt. J. Adv. Manuf. Technol.119631–46

[68] [68] Grtzmacher P G, Jalikop S V, Gachot C and Rosenkranz A 2021 Thermocapillary lubricant migration on textured surfaces-a review of theoretical and experimental insightsSurf. Topogr.: Metrol. Prop.9013001

[69] [69] Grtzmacher P G, Profito F J and Rosenkranz A 2019 Multi-scale surface texturing in tribology-current knowledge and future perspectivesLubricants795

[70] [70] Chorin A J 1968 Numerical solution of the Navier-Stokes equationsMath. Comput.22745–62

[71] [71] Reynolds O 1886 IV. On the theory of lubrication and its application to Mr. Beauchamp tower's experiments, including an experimental determination of the viscosity of olive oilPhil. Trans.177157–234

[72] [72] Wang Q J, Zhu D, Zhou R S and Hashimoto F 2008 Investigating the effect of surface finish on mixed EHL in rolling and rolling-sliding contactsTribol. Trans.51748–61

[73] [73] Epstein D, Keer L M, Wang Q J, Cheng H S and Zhu D 2003 Effect of surface topography on contact fatigue in mixed lubricationTribol. Trans.46506–13

[74] [74] Patir N and Cheng H S 1978 An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubricationJ. Lubr. Technol.10012–17

[75] [75] Spikes H A 2006 Sixty years of EHLLubr. Sci.18265–91

[76] [76] Shinkarenko A, Kligerman Y and Etsion I 2009 The effect of elastomer surface texturing in soft elasto-hydrodynamic lubricationTribol. Lett.3695–103

[77] [77] Li J F, Zhou F and Wang X L 2011 Modify the friction between steel ball and PDMS disk under water lubrication by surface texturingMeccanica46499–507

[78] [78] Marian M, Tremmel S and Wartzack S 2018 Microtextured surfaces in higher loaded rolling-sliding EHL line-contactsTribol. Int.127420–32

[79] [79] Hamrock B J and Dowson D 1977 Isothermal elastohydrodynamic lubrication of point contacts: Part IV—starvation resultsJ. Lubr. Technol.9915–23

[80] [80] Woloszynski T, Podsiadlo P and Stachowiak G W 2015 Evaluation of discretization and integration methods for the analysis of finite hydrodynamic bearings with surface texturingProc. Inst. Mech. Eng. J229465–77

[81] [81] Pagani L, Townsend A, Zeng W H, Lou S, Blunt L, Jiang X Q and Scott P J 2019 Towards a new definition of areal surface texture parameters on freeform surface: re-entrant features and functional parametersMeasurement141442–59

[82] [82] Vijayaraghavan D and Keith T G 1990 An efficient, robust, and time accurate numerical scheme applied to a cavitation algorithmJ. Tribol.11244–51

[83] [83] Payvar P and Salant R F 1992 A computational method for cavitation in a wavy mechanical sealJ. Tribol.114199–204

[84] [84] Ausas R, Ragot P, Leiva J, Jai M, Bayada G and Buscaglia G C 2007 The impact of the cavitation model in the analysis of microtextured lubricated journal bearingsJ. Tribol.129868–75

[85] [85] Kumar A and Booker J F 1991 A finite element cavitation algorithm: application/validationJ. Tribol.113255–60

[86] [86] Hajjam M and Bonneau D 2007 A transient finite element cavitation algorithm with application to radial lip sealsTribol. Int.401258–69

[87] [87] Pei S Y, Ma S L, Xu H, Wang F C and Zhang Y L 2011 A multiscale method of modeling surface texture in hydrodynamic regimeTribol. Int.441810–8

[88] [88] Woloszynski T, Podsiadlo P and Stachowiak G W 2013 Evaluation of discretisation and integration methods for the analysis of hydrodynamic bearings with and without surface texturingTribol. Lett.5125–47

[89] [89] Cupillard S, Glavatskih S and Cervantes M J 2009 3D thermohydrodynamic analysis of a textured sliderTribol. Int.421487–95

[90] [90] Cupillard S, Glavatskih S and Cervantes M J 2010 Inertia effects in textured hydrodynamic contactsProc. Inst. Mech. Eng. J224751–6

[91] [91] Feldman Y, Kligerman Y, Etsion I and Haber S 2006 The validity of the Reynolds equation in modeling hydrostatic effects in gas lubricated textured parallel surfacesJ. Tribol.128345–50

[92] [92] Ma C B and Zhu H 2011 An optimum design model for textured surface with elliptical-shape dimples under hydrodynamic lubricationTribol. Int.44987–95

[93] [93] Dobrica M B and Fillon M 2009 About the validity of Reynolds equation and inertia effects in textured sliders of infinite widthProc. Inst. Mech. Eng. J22369–78

[94] [94] Almqvist T and Larsson R 2004 Some remarks on the validity of Reynolds equation in the modeling of lubricant film flows on the surface roughness scaleJ. Tribol.126703–10

[95] [95] Huang Q P, Shi X L, Xue Y W, Zhang K P and Wu C H 2023 Recent progress on surface texturing and solid lubricants in tribology: designs, properties, and mechanismsMater. Today Commun.35105854

[96] [96] Etsion I 2013 Modeling of surface texturing in hydrodynamic lubricationFriction1195–209

[97] [97] Zhang B S, Jiang Y C, Ren T C, Chen B J, Zhang R Y and Mao Y C 2024 Recent advances in nature inspired triboelectric nanogenerators for self-powered systemsInt. J. Extrem. Manuf.6062003

[98] [98] Chen H W, Zhang P F, Zhang L W, Liu H L, Jiang Y, Zhang D Y, Han Z W and Jiang L 2016 Continuous directional water transport on the peristome surface ofNepenthes alata Nature53285–89

[99] [99] Liu Y H and Li G J 2012 A new method for producing “Lotus Effect” on a biomimetic shark skinJ. Colloid Interface Sci.388235–42

[100] [100] Zhao Y Z, Su Y L, Hou X Y and Hong M H 2021 Directional sliding of water: biomimetic snake scale surfacesOpto-Electron. Adv.4210008

[101] [101] Xu L Y, Yang L L, Yang S, Xu Z, Lin G J, Shi J J, Zhang R Y, Yu J Y, Ge D T and Guo Y 2021 Earthworm-inspired ultradurable superhydrophobic fabrics from adaptive wrinkled skinACS Appl. Mater. Interfaces136758–66

[102] [102] Wang H T, Li Y and Zhu H 2016 Experimental study on the tribological performance of fractal-like textured surface under mixed lubrication conditionsSurf. Coat. Technol.307220–6

[103] [103] Segu D Z and Hwang P 2015 Friction control by multi-shape textured surface under pin-on-disc testTribol. Int.91111–7

[104] [104] Wu C, Yang K, Ni J, Lu S G, Yao L D and Li X L 2023 Investigations for vibration and friction torque behaviors of thrust ball bearing with self-driven textured guiding surfaceFriction11894–910

[105] [105] Tala-Ighil N, Fillon M and Maspeyrot P 2011 Effect of textured area on the performances of a hydrodynamic journal bearingTribol. Int.44211–9

[106] [106] Lu Y 2017 Fabrication of a lotus leaf-like hierarchical structure to induce an air lubricant for drag reductionSurf. Coat. Technol.33148–56

[107] [107] Wang X L, Adachi K, Otsuka K and Kato K 2006 Optimization of the surface texture for silicon carbide sliding in waterAppl. Surf. Sci.2531282–6

[108] [108] Segu D Z, Choi S G, Choi J H and Kim S S 2013 The effect of multi-scale laser textured surface on lubrication regimeAppl. Surf. Sci.27058–63

[109] [109] Yang H, Yang X F, Cong J C, Sun J, Shao S B, Hou Q M and Zhang Y F 2023 Wear behavior of microgroove texture of cemented carbide tool prepared by laser surface textureMicrofluid. Nanofluid.2744

[110] [110] Sharma S C and Yadav S K 2016 A comparative study of full and partial textured hybrid orifice compensated circular thrust pad bearing systemTribol. Int.95170–80

[111] [111] Sun J, Qin X Z, Song Y X, Xu Z Y, Zhang C, Wang W, Wang Z K, Wang B and Wang Z K 2023 Selective liquid directional steering enabled by dual-scale reentrant ratchetsInt. J. Extrem. Manuf.5025504

[112] [112] Buscaglia G C, Ausas R F and Jai M 2006 Optimization tools in the analysis of micro-textured lubricated devicesInverse Probl. Sci. Eng.14365–78

[113] [113] Simpson T W, Poplinski J D, Koch P N and Allen J K 2001 Metamodels for computer-based engineering design: survey and recommendationsEng. Comput.17129–50

[114] [114] Shen C and Khonsari M M 2016 Texture shape optimization for seal-like parallel surfaces: theory and experimentTribol. Trans.59698–706

[115] [115] Shen C and Khonsari M M 2015 Numerical optimization of texture shape for parallel surfaces under unidirectional and bidirectional slidingTribol. Int.821–11

[116] [116] Tu Z R, Meng X K, Ma Y and Peng X D 2021 Shape optimization of hydrodynamic textured surfaces for enhancing load-carrying capacity based on level set methodTribol. Int.162107136

[117] [117] Kalliorinne K, Prez-Rfols F, Fabricius J and Almqvist A 2020 Application of topological optimisation methodology to infinitely wide slider bearings operating under compressible flowProc. Inst. Mech. Eng. J2341035–50

[118] [118] Kalliorinne K and Almqvist A 2021 Application of topological optimisation methodology to finitely wide slider bearings operating under incompressible flowProc. Inst. Mech. Eng. J235698–710

[119] [119] Zhang G J, Li J, Tian Z X, Huang Y and Chen R C 2016 Film shape optimization for two-dimensional rough slider bearingsTribol. Trans.5917–27

[120] [120] van Ostayen R A J 2010 Film height optimization of dynamically loaded hydrodynamic slider bearingsTribol. Int.431786–93

[121] [121] Huang Q P, Shi X L, Xue Y W, Zhang K P and Wu C H 2021 Optimization of bionic textured parameter to improve the tribological performance of AISI 4140 self-lubricating composite through response surface methodologyTribol. Int.161107104

[122] [122] Codrignani A, Savio D, Pastewka L, Frohnapfel B and Van Ostayen R 2020 Optimization of surface textures in hydrodynamic lubrication through the adjoint methodTribol. Int.148106352

[123] [123] Zhang H, Dong G N, Hua M and Chin K S 2017 Improvement of tribological behaviors by optimizing concave texture shape under reciprocating sliding motionJ. Tribol.139011701

[124] [124] Zhang X Y, Liu C P and Zhao B 2021 An optimization research on groove textures of a journal bearing using particle swarm optimization algorithmMech. Ind.221

[125] [125] Zhang W X and Zhu B 2023 Optimization design for slip/no-slip configuration of hydrophobic sliding bearings using Monte Carlo searchTribol. Int.178108034

[126] [126] Wang W, He Y Y, Zhao J, Mao J Y, Hu Y T and Luo J B 2020 Optimization of groove texture profile to improve hydrodynamic lubrication performance: theory and experimentsFriction883–94

[127] [127] Marian M and Tremmel S 2021 Current trends and applications of machine learning in tribology—a reviewLubricants986

[128] [128] Bhaumik S, Chowdhury D, Batham A, Sehgal U, Ghosh C, Bhattacharya B and Datta S 2020 Analysing the frictional properties of micro dimpled surface created by milling machine under lubricated conditionTribol. Int.146106260

[129] [129] Mo F, Shen C, Zhou J and Khonsari M M 2017 Statistical analysis of the influence of imperfect texture shape and dimensional uncertainty on surface texture performanceIEEE Access527023–35

[130] [130] Mousavirad S J, Rahmani R and Dolatabadi N 2023 A transfer learning based artificial neural network in geometrical design of textured surfaces for tribological applicationsSurf. Topogr.: Metrol. Prop.11025001

[131] [131] Rosenkranz A, Marian M, Profito F J, Aragon N and Shah R 2021 The use of artificial intelligence in tribology—a perspectiveLubricants92

[132] [132] Zhu B, Zhang W X, Zhang W S and Li H X 2023 Generative design of texture for sliding surface based on machine learningTribol. Int.179108139

[133] [133] Hao Y P, Zhu L D, Qin S Q, Pei X Y, Yan T M, Qin Q Y, Lu H and Yan B L 2024 On-machine inspection and compensation for thin-walled parts with sculptured surface considering cutting vibration and probe postureInt. J. Extrem. Manuf.6065602

[134] [134] Johns-Rahnejat P M, Rahmani R and Rahnejat H 2023 Current and future trends in tribological researchLubricants11391

[135] [135] Rosenkranz A and Marian M 2022 Combining surface textures and MXene coatings—towards enhanced wear-resistance and durabilitySurf. Topogr.: Metrol. Prop.10033001

[136] [136] Watanabe S, Kodama E, Tadokoro C, Sakakibara K, Nakano K, Sasaki S and Tsujii Y 2021 Durability improvement of concentrated polymer brushes by multiscale texturingTribol. Lett.6999

[137] [137] Miyazaki M, Nakano K, Tadokoro C, Vldescu S C, Reddyhoff T, Sasaki S and Tsujii Y 2021 Enhancing durability of concentrated polymer brushes using microgrooved substratesWear482–483203984

[138] [138] Vldescu S C, Tadokoro C, Miyazaki M, Reddyhoff T, Nagamine T, Nakano K, Sasaki S and Tsujii Y 2022 Exploiting the synergy between concentrated polymer brushes and laser surface texturing to achieve durable superlubricityACS Appl. Mater. Interfaces1415818–29

[139] [139] Wu C, Wu Y W, Zhao H J, Li S S, Ni J and Li X L 2023 Influence of hardness of nanoparticle additive in PTFE solid lubricant on tribological properties of GCr15 steel with bionic textureTribol. Int.189108915

[140] [140] Xing Y Q, Wang X S, Du Z H, Zhu Z W, Wu Z and Liu L 2022 Synergistic effect of surface textures and DLC coatings for enhancing friction and wear performances of Si3N4/TiC ceramicCeram. Int.48514–24

[141] [141] Cui W Y, Chen H Z, Zhao J X, Ma Q S, Xu Q and Ma T B 2023 Progresses on cryo-tribology: lubrication mechanisms, detection methods and applicationsInt. J. Extrem. Manuf.5022004

[142] [142] Kobayashi M, Tanaka H, Minn M, Sugimura J and Takahara A 2014 Interferometry study of aqueous lubrication on the surface of polyelectrolyte brushACS Appl. Mater. Interfaces620365–71

[143] [143] Klein J 1994 Shear of polymer brushesColloids Surf.A8663–76

[144] [144] Klein J, Kumacheva E, Mahalu D, Perahia D and Fetters L J 1994 Reduction of frictional forces between solid surfaces bearing polymer brushesNature370634–

[145] [145] Bielecki R M, Benetti E M, Kumar D and Spencer N D 2012 Lubrication with oil-compatible polymer brushesTribol. Lett.45477–87

[146] [146] Bielecki R M, Crobu M and Spencer N D 2013 Polymer-brush lubrication in oil: sliding beyond the stribeck curveTribol. Lett.49263–72

[147] [147] Heeb R, Bielecki R M, Lee S and Spencer N D 2009 Room-temperature, aqueous-phase fabrication of poly (methacrylic acid) brushes by UV-LED-induced, controlled radical polymerization with high selectivity for surface-bound speciesMacromolecules429124–32

[148] [148] Rong M M, Liu H, Scaraggi M, Bai Y Y, Bao L Y, Ma S H, Ma Z F, Cai M R, Dini D and Zhou F 2020 High lubricity meets load capacity: cartilage mimicking bilayer structure by brushing up stiff hydrogels from subsurfaceAdv. Funct. Mater.302004062

[149] [149] Nunez E E, Gheisari R and Polycarpou A A 2019 Tribology review of blended bulk polymers and their coatings for high-load bearing applicationsTribol. Int.12992–111

[150] [150] Ye J X, Zhang Y F, Zhang K S, Wang W, Liu X J and Liu K 2020 Hybrid wear-reducing micro-pits counterface texture against polymeric solid lubricantsTribol. Lett.6833

[151] [151] Xiong D S, Qin Y K, Li J L, Wan Y and Tyagi R 2015 Tribological properties of PTFE/laser surface textured stainless steel under starved oil lubricationTribol. Int.82305–10

[152] [152] Zhao S, Yu A B, Zou P, Wang G L, Li K F, Wang J W, Qi S C and Ye J W 2023 Tribological properties of dopamine-modified dimple textured surfaces filled with PTFEProc. Inst. Mech. Eng. J237655–66

[153] [153] Suh N P, Mosleh M and Howard P S 1994 Control of frictionWear175151–8

[154] [154] He D Q, He C, Li W S, Shang L L, Wang L P and Zhang G G 2020 Tribological behaviors ofin-situtextured DLC films under dry and lubricated conditionsAppl. Surf. Sci.525146581

[155] [155] Jin L, Li Y T, Liu C B, Fan X Q and Zhu M H 2023 Friction mechanism of DLC/MAO wear-resistant coatings with porous surface texture constructedin-situby micro-arc oxidationSurf. Coat. Technol.473130010

[156] [156] Chiu M C, Hsieh W P, Ho W Y, Wang D Y and Shieu F S 2005 Thermal stability of Cr-doped diamond-like carbon films synthesized by cathodic arc evaporationThin Solid Films476258–63

[157] [157] Amanov A, Watabe T, Tsuboi R and Sasaki S 2013 Improvement in the tribological characteristics of Si-DLC coating by laser surface texturing under oil-lubricated point contacts at various temperaturesSurf. Coat. Technol.232549–60

[158] [158] Lin N M, Liu Q, Zou J J, Guo J W, Li D L, Yuan S, Ma Y, Wang Z X, Wang Z H and Tang B 2016 Surface texturing-plasma nitriding duplex treatment for improving tribological performance of AISI 316 stainless steelMaterials9875

[159] [159] Fan P F, Goel S, Luo X C and Upadhyaya H M 2022 Atomic-scale friction studies on single-crystal gallium arsenide using atomic force microscope and molecular dynamics simulationNanomanuf. Metrol.539–49

[160] [160] Sun J N, Zhang L, Zhang Y, Han Y L and Zhang L 2023 Effect of refresh time on XeF2gas-assisted FIB milling of GaAsNanomanuf. Metrol.629

[161] [161] Cao L, Chen Y, Cui J, Li W, Lin Z D and Zhang P 2020 Corrosion wear performance of pure titanium laser texturing surface by nitrogen ion implantationMetals10990

[162] [162] Liu D R, Zhang Q, Qin Z B, Luo Q, Wu Z and Liu L 2016 Tribological performance of surfaces enhanced by texturing and nitrogen implantationAppl. Surf. Sci.363161–7

[163] [163] Bagherifard S, Slawik S, Fernndez-Pariente I, Pauly C, Mcklich F and Guagliano M 2016 Nanoscale surface modification of AISI 316L stainless steel by severe shot peeningMater. Des.10268–77

[164] [164] Torres H, Slawik S, Gachot C, Prakash B and Rodrguez Ripoll M 2018 Microstructural design of self-lubricating laser claddings for use in high temperature sliding applicationsSurf. Coat. Technol.33724–34

[165] [165] Wu H, Jia F H, Li Z, Lin F, Huo M S, Huang S Q, Sayyar S, Jiao S H, Huang H and Jiang Z Y 2020 Novel water-based nanolubricant with superior tribological performance in hot steel rollingInt. J. Extrem. Manuf.2025002

[166] [166] Peng R L, Guo J D, Han S X, Zeng Q F, Cao W and Du H 2020 Tribological performance of freeze-drying nano-copper particle as additive of paroline oilMater. Res. Express7025028

[167] [167] Birleanu C, Pustan M, Cioaza M, Molea A, Popa F and Contiu G 2022 Effect of TiO2 nanoparticles on the tribological properties of lubricating oil: an experimental investigationSci. Rep.125201

[168] [168] Wang X Z, Li C C, Gong K L and Wu X H 2023 Surface-modified MoS2 nanoparticles as tribological additives in a glycerol solutionACS Appl. Nano Mater.66662–9

[169] [169] Zhang Y P, Guo X H, Li Z H, Wang C D, Liu T S and Zhang K D 2022 Study on the tribological properties of Fe3O4@CNTs nanofluids acting on the textured ceramicsAppl. Phys.A128161

[170] [170] Zheng D, Cai Z B, Shen M X, Li Z Y and Zhu M H 2016 Investigation of the tribology behaviour of the graphene nanosheets as oil additives on textured alloy cast iron surfaceAppl. Surf. Sci.38766–75

[171] [171] Kumara C, Luo H M, Leonard D N, Meyer H M and Qu J 2017 Organic-modified silver nanoparticles as lubricant additivesACS Appl. Mater. Interfaces937227–37

[172] [172] Qu M N, Yao Y L, He J M, Ma X R, Feng J, Liu S S, Hou L G and Liu X R 2017 Tribological study of polytetrafluoroethylene lubricant additives filled with Cu microparticles or SiO2 nanoparticlesTribol. Int.11057–65

[173] [173] Zhao Z S, Zhang Y S, Wang S F, Guo K, Tang J, Wu Z G, Zhang G G, Zhu Y X, Yan P X and Zhang W Y 2019 Tribological properties of oleylamine-modified nickel nanoparticles as lubricating oil additiveMater. Res. Express6105037

[174] [174] Han K, Zhang Y J, Song N N, Yu L G, Zhang P Y, Zhang Z J, Qian L and Zhang S M 2022 The current situation and future direction of nanoparticles lubricant additives in ChinaLubricants10312

[175] [175] Tang W W, Zhang Z and Li Y F 2021 Applications of carbon quantum dots in lubricant additives: a reviewJ. Mater. Sci.5612061–92

[176] [176] Kumar S, Nehra M, Kedia D, Dilbaghi N, Tankeshwar K and Kim K H 2019 Nanodiamonds: emerging face of future nanotechnologyCarbon143678–99

[177] [177] Zhao J, Gao T, Li Y R, He Y Y and Shi Y J 2021 Two-dimensional (2D) graphene nanosheets as advanced lubricant additives: a critical review and prospectMater. Today Commun.29102755

[178] [178] Lu Q, Zhang T Y, Wang Y X, Liu S J, Ye Q and Zhou F 2023 Boron-nitrogen codoped carbon nanosheets as oil-based lubricant additives for antioxidation, antiwear, and friction reductionACS Sustain. Chem. Eng.1111867–77

[179] [179] Yu H L, Xu Y, Shi P J, Xu B S, Wang X L, Liu Q and Wang H M 2008 Characterization and nano-mechanical properties of tribofilms using Cu nanoparticles as additivesSurf. Coat. Technol.20328–34

[180] [180] Segu D Z, Chae Y, Lee S J and Kim C L 2023 Synergistic influences of laser surface texturing and ZrO2-MoDTC hybrid nanofluids for enhanced tribological performanceTribol. Int.183108377

[181] [181] Cai M R, Yu Q L, Liu W M and Zhou F 2020 Ionic liquid lubricants: when chemistry meets tribologyChem. Soc. Rev.497753–818

[182] [182] Zhou Y and Qu J 2017 Ionic liquids as lubricant additives: a reviewACS Appl. Mater. Interfaces93209–22

[183] [183] Qu Jet al2012 Antiwear performance and mechanism of an oil-miscible ionic liquid as a lubricant additiveACS Appl. Mater. Interfaces4997–1002

[184] [184] Singh J, Chatha S S and Bhatia R 2022 Behaviour and applications of ionic liquids as lubricants in tribology: a reviewMater. Today: Proc.562659–65

[185] [185] Reeves C J, Kasar A K and Menezes P L 2021 Tribological performance of environmental friendly ionic liquids for high-temperature applicationsJ. Clean. Prod.279123666

[186] [186] Shi G Q, Yu X D, Meng H, Zhao F H, Wang J F, Jiao J H and Jiang H 2023 Effect of surface modification on friction characteristics of sliding bearings: a reviewTribol. Int.177107937

[187] [187] Thakre G D, Sharma S C, Harsha S P and Tyagi M R 2016 A theoretical study of ionic liquid lubricatedμ-EHL line contacts considering surface textureTribol. Int.9439–51

[188] [188] Samanta A, Huang W, Lee K, He X, Kumara C, Qu J and Ding H 2023 Role of surface wetting on tribological behavior for laser nanotextured steel using ionic liquid lubricantsJ. Manuf. Process.95302–11

[189] [189] Zhang J, Yao Y Y, Sheng L and Liu J 2015 Self-fueled biomimetic liquid metal molluskAdv. Mater.272648–55

[190] [190] Li H Y, Yang Y and Liu J 2012 Printable tiny thermocouple by liquid metal gallium and its matching metalAppl. Phys. Lett.101073511

[191] [191] Guo J, Cheng J, Wang S, Yu Y, Zhu S Y, Yang J and Liu W M 2018 A protective FeGa3film on the steel surface prepared byin-situhot-reaction with liquid metalMater. Lett.22817–20

[192] [192] Guo J, Cheng J, Tan H, Zhu S Y, Qiao Z H, Yang J and Liu W M 2018 Ga-based liquid metal: lubrication and corrosion behaviors at a wide temperature rangeMaterialia410–19

[193] [193] Li H J, Tian P Y, Lu H Y, Jia W P, Du H D, Zhang X J, Li Q Y and Tian Y 2017 State-of-the-art of extreme pressure lubrication realized with the high thermal diffusivity of liquid metalACS Appl. Mater. Interfaces95638–44

[194] [194] Hughes W F 1963 Magnetohydrodynamic lubrication and application to liquid metalsInd. Lubr. Tribol.15125–33

[195] [195] Kezik V Y, Kalinichenko A S and Kalinitchenko V A 2003 The application of gallium as a liquid metal lubricantInt. J. Mater. Res.9481–90

[196] [196] Gerkema J 1985 Gallium-based liquid-metal full-film lubricated journal bearingsASLE Trans.2847–53

[197] [197] Li Y, Zhang S W, Ding Q, Feng D P, Qin B F and Hu L T 2018 Liquid metal as novel lubricant in a wide temperature range from −10 to 800 ℃Mater. Lett.215140–3

[198] [198] Guo J, Si Y X, Liu Q, Cao X J, Cheng J, Yang J and Liu W M 2023 The lubrication regimes and transition laws of gallium liquid-metalTribol. Int.188108838

[199] [199] Nsilani Kouediatouka A, Ma Q, Liu Q, Mawignon F J, Rafique F and Dong G N 2022 Design methodology and application of surface texture: a reviewCoatings121015

[200] [200] Li X, Li Y H, Tong Z, Ma Q, Ni Y Q and Dong G N 2019 Enhanced lubrication effect of gallium-based liquid metal with laser textured surfaceTribol. Int.129407–15

[201] [201] Fannin P C, Marin C N, Malaescu I and Stefu N 2007 An investigation of the microscopic and macroscopic properties of magnetic fluidsPhysicaB38887–92

[202] [202] Chandra P, Sinha P and Kumar D 1992 Ferrofluid lubrication of a journal bearing considering cavitationTribol. Trans.35163–9

[203] [203] Umehara N and Komanduri R 1996 Magnetic fluid grinding of HIP-Si3N4 rollersWear19285–93

[204] [204] Prajapati B L 1995 Magnetic-fluid-based porous squeeze filmsJ. Magn. Magn. Mater.14997–100

[205] [205] Huang W, Wang X L, Ma G L and Shen C 2009 Study on the synthesis and tribological property of Fe3O4 based magnetic fluidsTribol. Lett.33187–92

[206] [206] Uhlmann E, Spur G, Bayat N and Patzwald R 2002 Application of magnetic fluids in tribotechnical systemsJ. Magn. Magn. Mater.252336–40

[207] [207] Shen C, Huang W, Ma G L and Wang X L 2009 A novel surface texture for magnetic fluid lubricationSurf. Coat. Technol.204433–9

[208] [208] Liao S J, Huang W and Wang X L 2012 Micro-magnetic field arrayed surface for ferrofluids lubricationJ. Tribol.134021701

[209] [209] Guo X H, Huang Q, Wang C D, Liu T S, Zhang Y P, He H D and Zhang K D 2022 Effect of magnetic field on cutting performance of micro-textured tools under Fe3O4 nanofluid lubrication conditionJ. Mater. Process. Technol.299117382

[210] [210] Zhang L, Guo X H, Zhang K D, Wu Y Q and Huang Q 2020 Enhancing cutting performance of uncoated cemented carbide tools by joint-use of magnetic nanofluids and micro-texture under magnetic fieldJ. Mater. Process. Technol.284116764

[211] [211] Zhang K D, Li Z H, Wang S S, Wang P, Zhang Y P and Guo X H 2023 Study on the cooling and lubrication mechanism of magnetic field-assisted Fe3O4@CNTs nanofluid in micro-textured tool cuttingJ. Manuf. Process.85556–68

[212] [212] Gutowski P and Leus M 2012 The effect of longitudinal tangential vibrations on friction and driving forces in sliding motionTribol. Int.55108–18

[213] [213] Wallaschek J 1998 Contact mechanics of piezoelectric ultrasonic motorsSmart Mater. Struct.7369–81

[214] [214] Wang P, Ni H J, Wang R H, Li Z N and Wang Y 2016 Experimental investigation of the effect of in-plane vibrations on friction for different materialsTribol. Int.99237–47

[215] [215] Liu W L, Ni H J, Wang P and Chen H L 2020 Investigation on the tribological performance of micro-dimples textured surface combined with longitudinal or transverse vibration under hydrodynamic lubricationInt. J. Mech. Sci.174105474

[216] [216] Mitrofanov A V, Ahmed N, Babitsky V I and Silberschmidt V V 2005 Effect of lubrication and cutting parameters on ultrasonically assisted turning of Inconel 718J. Mater. Process. Technol.162–163649–54

[217] [217] Sun Z T, Shuang F and Ma W 2018 Investigations of vibration cutting mechanisms of Ti6Al4V alloyInt. J. Mech. Sci.148510–30

[218] [218] Usman M M, Zou P, Yang Z Y, Lin T Y and Muhammad I 2022 Evaluation of micro-textured tool performance in ultrasonic elliptical vibration-assisted turning of 304 stainless steelInt. J. Adv. Manuf. Technol.1214403–18

[219] [219] Mistry K K, Morina A and Neville A 2011 A tribochemical evaluation of a WC–DLC coating in EP lubrication conditionsWear2711739–44

[220] [220] Wang X L, Kato K, Adachi K and Aizawa K 2001 The effect of laser texturing of SiC surface on the critical load for the transition of water lubrication mode from hydrodynamic to mixedTribol. Int.34703–11

[221] [221] Agapov R L, Boreyko J B, Briggs D P, Srijanto B R, Retterer S T, Collier C P and Lavrik N V 2014 Asymmetric wettability of nanostructures directs leidenfrost dropletsACS Nano8860–7

[222] [222] Li B H, Jiang L, Li X W, Wang Z P and Yi P 2024 Self-propelled Leidenfrost droplets on femtosecond-laser-induced surface with periodic hydrophobicity gradientInt. J. Extrem. Manuf.6025502

[223] [223] Wos S, Koszela W, Pawlus P, Drabik J and Rogos E 2018 Effects of surface texturing and kind of lubricant on the coefficient of friction at ambient and elevated temperaturesTribol. Int.117174–9

[224] [224] Gao H C and Chen X Y 2020 Effect of surface texturing on hydrodynamic lubrication at various temperaturesAIP Adv.10055301

[225] [225] Shen Y, Li Q, Liu Z X, Ye B, Fan J J and Xu J J 2023 Influence of different loads and temperatures on solid lubricant-filled micro-dimples existing on both cylinder liner and piston ringWear526–527204926

[226] [226] Chen C, Lu Y and Xue C 2021 Drag reduction mechanism of vapour-assisted liquid membrane lubrication on texture surface with elevated temperatureLubr. Sci.33358–68

[227] [227] Yong J L, Chen F, Li M J, Yang Q, Fang Y, Huo J L and Hou X 2017 Remarkably simple achievement of superhydrophobicity, superhydrophilicity, underwater superoleophobicity, underwater superoleophilicity, underwater superaerophobicity, and underwater superaerophilicity on femtosecond laser ablated PDMS surfacesJ. Mater. Chem.A525249–57

[228] [228] Suh M S, Chae Y H, Kim S S, Hinoki T and Kohyama A 2010 Effect of geometrical parameters in micro-grooved crosshatch pattern under lubricated sliding frictionTribol. Int.431508–17

[229] [229] Matsumura T, Muramatsu T and Fueki S 2011 Abrasive water jet machining of glass with stagnation effectCIRP Ann.60355–8

[230] [230] Maeng S, Lee P A, Kim B H and Min S 2020 An analytical model for grinding force prediction in ultra-precision machining of WC with PCD micro grinding toolInt. J. Precis. Eng. Manuf. Green Technol.71031–45

[231] [231] Mukaida M and Yan J W 2017 Fabrication of hexagonal microlens arrays on single-crystal silicon using the tool-servo driven segment turning methodMicromachines8323

[232] [232] Shu T, Liu F, Chen S, Liu X T, Zhang C and Cheng G J 2022 Origins of ultrafast pulse laser-induced nano straight lines with potential applications in detecting subsurface defects in silicon carbide wafersNanomanuf. Metrol.5167–78

[233] [233] Wang J S, Fang F Z, An H J, Wu S, Qi H M, Cai Y X and Guo G Y 2023 Laser machining fundamentals: micro, nano, atomic and close-to-atomic scalesInt. J. Extrem. Manuf.5012005

[234] [234] Li X R, Zhang B Y, Jakobi T, Yu Z L, Ren L Q and Zhang Z H 2024 Laser-based bionic manufacturingInt. J. Extrem. Manuf.6042003

[235] [235] Zhang J G, Zheng Z D, Huang K, Lin C T, Huang W Q, Chen X, Xiao J F and Xu J F 2024 Field-assisted machining of difficult-to-machine materialsInt. J. Extrem. Manuf.6032002

[236] [236] Yuan Y J, Yu K K, Zhang C, Chen Q and Yang W X 2023 Generation of textured surfaces by vibration-assisted ball-end millingNanomanuf. Metrol.619

[237] [237] Mao W Q, Li H N, Tang B, Zhang C, Liu L, Wang P, Dong H X and Zhang L 2023 Laser patterning of large-scale perovskite single-crystal-based arrays for single-mode laser displaysInt. J. Extrem. Manuf.5045001

[238] [238] Tangwarodomnukun V 2016 Cavity formation and surface modeling of laser milling process under a thin-flowing water layerAppl. Surf. Sci.38651–64

[239] [239] Bharatish A, Harish V, Bathe R N, Senthilselvan J and Soundarapandian S 2018 Effect of scanning speed and tin content on the tribological behavior of femtosecond laser textured tin-bronze alloyOpt. Laser Technol.10817–25

[240] [240] Salguero J, Del Sol I, Vazquez-Martinez J M, Schertzer M J and Iglesias P 2019 Effect of laser parameters on the tribological behavior of Ti6Al4V titanium microtextures under lubricated conditionsWear426–4271272–9

[241] [241] Allahyari Eet al2020 Femtosecond laser surface irradiation of silicon in air: pulse repetition rate influence on crater features and surface textureOpt. Laser Technol.126106073

[242] [242] Chen Yet al2021 Achieving a sub-10 nm nanopore array in silicon by metal-assisted chemical etching and machine learningInt. J. Extrem. Manuf.3035104

[243] [243] Xu Y F, Yu J Y, Geng J, Abuflaha R, Olson D, Hu X G and Tysoe W T 2018 Characterization of the tribological behavior of the textured steel surfaces fabricated by photolithographic etchingTribol. Lett.6655

[244] [244] Basir A, Liza S, Fukuda K and Tahir N A M 2023 Tribological behaviour of multi-shape photochemical textured surfacesSurf. Topogr.: Metrol. Prop.11025009

[245] [245] Xie M Z, Zhan Z H, Li Y F, Zhao J K, Zhang C, Wang Z L and Wang Z K 2024 Functional microfluidics: theory, microfabrication, and applicationsInt. J. Extrem. Manuf.6032005

[246] [246] Shi L P, Fang Y, Dai Q W, Huang W and Wang X L 2018 Surface texturing on SiC by multiphase jet machining with microdiamond abrasivesMater. Manuf. Process.331415–21

[247] [247] Nakano M, Korenaga A, Korenaga A, Miyake K, Murakami T, Ando Y, Usami H and Sasaki S 2007 Applying micro-texture to cast iron surfaces to reduce the friction coefficient under lubricated conditionsTribol. Lett.28131–7

[248] [248] Sedlaek M, Vilhena L M S, Podgornik B and Viintin J 2011 Surface topography modelling for reduced frictionStrojniski Vestn.-J. Mech. Eng.57674–80

[249] [249] Shichao X, Minghe L, Caixia C X and Shujun S J 2014 Study on micro-surface texture and tribology characters of ground surface in point grinding processInt. J. Surf. Sci. Eng.8225

[250] [250] Stpie P 2011 Deterministic and stochastic components of regular surface texture generated by a special grinding processWear271514–8

[251] [251] Xie J, Luo M J, He J L, Liu X R and Tan T W 2012 Micro-grinding of micro-groove array on tool rake surface for dry cutting of titanium alloyInt. J. Precis. Eng. Manuf.131845–52

[252] [252] Liu H Z, Yan Y D, Cui J W, Geng Y Q, Sun T, Luo X C and Zong W J 2024 Recent advances in design and preparation of micro diamond cutting toolsInt. J. Extrem. Manuf.6062008

[253] [253] Yan J W, Oowada T, Zhou T F and Kuriyagawa T 2009 Precision machining of microstructures on electroless-plated NiP surface for molding glass componentsJ. Mater. Process. Technol.2094802–8

[254] [254] Zou L, Huang Y, Zhou M and Duan L 2017 Investigation on diamond tool wear in ultrasonic vibration-assisted turning die steelsMater. Manuf. Process.321505–11

[255] [255] Yin X M, Li X, Liu Y H, Geng D X and Zhang D Y 2023 Surface integrity and fatigue life of Inconel 718 by ultrasonic peening millingJ. Mater. Res. Technol.221392–409

[256] [256] Li Z W, Zhang J F, Zheng Z P, Feng P F, Yu D W and Wang J J 2024 Elliptical vibration chiseling: a novel process for texturing ultra-high-aspect-ratio microstructures on the metallic surfaceInt. J. Extrem. Manuf.6025102

[257] [257] Zhang J J, Zhang J G, Rosenkranz A, Zhao X L and Song Y L 2018 Surface textures fabricated by laser surface texturing and diamond cutting–influence of texture depth on friction and wearAdv. Eng. Mater.201700995

[258] [258] Du H H, Jiang M N, Wang Z K, Zhu Z W and To S 2023 Generating micro/nanostructures on magnesium alloy surface using ultraprecision diamond surface texturing processJ. Magnesium Alloys111472–83

[259] [259] Wang J J, Liao W H and Guo P 2020 Modulated ultrasonic elliptical vibration cutting for ductile-regime texturing of brittle materials with 2-D combined resonant and non-resonant vibrationsInt. J. Mech. Sci.170105347

[260] [260] Zhai W Z, Zhao Y J, Zhou R H, Lu W L, Zhai W C, Liu X J, Zhou L P and Chang S P 2022 Additively manufactured (Fe, Ni) Al-reinforced nickel aluminum bronze with nearly-isotropic mechanical properties in build and transverse directionsMater. Charact.184111706

[261] [261] Chivate A and Zhou C 2024 Additive manufacturing of micropatterned functional surfaces: a reviewInt. J. Extrem. Manuf.6042004

[262] [262] Yang K, Ma H R, Wang L F, Cao Z Z and Zhang C L 2021 Analysis of self-regulating tribological functions of the MgAl microchannels prepared in the Ti alloysTribol. Int.154106717

[263] [263] Vrbka M, amnek O, perka P, Nvrat T, Kupka I and Hartl M 2010 Effect of surface texturing on rolling contact fatigue within mixed lubricated non-conformal rolling/sliding contactsTribol. Int.431457–65

[264] [264] Szurdak A, Rosenkranz A, Gachot C, Hirt G and Mcklich F 2014 Manufacturing and tribological investigation of hot micro-coined lubrication pocketsKey Eng. Mater.611–612417–24

[265] [265] Pettersson U and Jacobson S 2006 Tribological texturing of steel surfaces with a novel diamond embossing tool techniqueTribol. Int.39695–700

[266] [266] Sahu A K, Malhotra J and Jha S 2022 Laser-based hybrid micromachining processes: a reviewOpt. Laser Technol.146107554

[267] [267] Yang J H, Sun S J, Brandt M and Yan W Y 2010 Experimental investigation and 3D finite element prediction of the heat affected zone during laser assisted machining of Ti6Al4V alloyJ. Mater. Process. Technol.2102215–22

[268] [268] Masuzawa T 2000 State of the art of micromachiningCIRP Ann.49473–88

[269] [269] Ren Y H, Li C F, Li W, Li M J and Liu H 2019 Study on micro-grinding quality in micro-grinding tool for single crystal siliconJ. Manuf. Process.42246–56

[270] [270] Melentiev R and Fang F Z 2018 Recent advances and challenges of abrasive jet machiningCIRP J. Manuf. Sci. Technol.221–20

[271] [271] Zhang S J, To S and Zhang G Q 2017 Diamond tool wear in ultra-precision machiningInt. J. Adv. Manuf. Technol.88613–41

[272] [272] Zhao Y, Mei H, Chang P, Yang Y B, Huang W F, Liu Y, Cheng L F and Zhang L T 2021 3D-printed topological MoS2/MoSe2heterostructures for macroscale superlubricityACS Appl. Mater. Interfaces1334984–95

[273] [273] Zhang D Y, Qiu D, Gibson M A, Zheng Y F, Fraser H L, StJohn D H and Easton M A 2019 Additive manufacturing of ultrafine-grained high-strength titanium alloysNature57691–95

[274] [274] Divin-Mariotti S, Amieux P, Pascale-Hamri A, Auger V, Kermouche G, Valiorgue F and Valette S 2019 Effects of micro-knurling and femtosecond laser micro texturing on aluminum long-term surface wettabilityAppl. Surf. Sci.479344–50

[275] [275] Zhang G H, Huang M, Chen G L, Li J S, Liu Y, He J G, Zheng Y Q, Tang S W and Cui H L 2024 Design and optimization of fluid lubricated bearings operated with extreme working performances—a comprehensive reviewInt. J. Extrem. Manuf.6022010

[276] [276] Henry Y, Bouyer J and Fillon M 2015 An experimental analysis of the hydrodynamic contribution of textured thrust bearings during steady-state operation: a comparison with the untextured parallel surface configurationProc. Inst. Mech. Eng. J229362–75

[277] [277] Wang L L, Guo S H, Wei Y L, Yuan G T and Geng H 2019 Optimization research on the lubrication characteristics for friction pairs surface of journal bearings with micro textureMeccanica541135–48

[278] [278] Aggarwal S and Pandey R K 2018 Performance investigation of micro-pocketed textured pad thrust bearingInd. Lubr. Tribol.701388–95

[279] [279] Atwal J C and Pandey R K 2021 Film thickness and friction investigations in a fluid film thrust bearing employing a new conceived micro-texture on padsJ. Tribol.143061801

[280] [280] Chen D J, Sun Y Q, Zhao Y, Sun K and Fan J W 2023 Influence of the distribution position and arrangement of micro-textured on the performance of the hydrostatic bearingInd. Lubr. Tribol.75721–8

[281] [281] Usman A and Park C W 2016 Optimizing the tribological performance of textured piston ring–liner contact for reduced frictional losses in SI engine: warm operating conditionsTribol. Int.99224–36

[282] [282] Shen C and Khonsari M M 2016 Tribological and sealing performance of laser pocketed piston rings in a diesel engineTribol. Lett.6426

[283] [283] Patil A S and Shirsat U M 2021 Effect of laser textured dimples on tribological behavior of piston ring and cylinder liner contact at varying loadMater. Today: Proc.441005–20

[284] [284] Yin H B, Zhang X C, Guo Z W, Xu Y C, Rao X and Yuan C Q 2023 Synergetic effects of surface textures with modified copper nanoparticles lubricant additives on the tribological properties of cylinder liner-piston ringTribol. Int.178108085

[285] [285] Zhao J, Li Z M Q, Zhang H and Zhu R P 2021 Effect of micro-textures on lubrication characteristics of spur gears under 3D line-contact EHL modelInd. Lubr. Tribol.731132–45

[286] [286] Chang X F, Renqing D J, Liao L X, Zhu P Y, Lin B J, Huang Y B and Luo S M 2023 Study on hydrodynamic lubrication and friction reduction performance of spur gear with groove textureTribol. Int.177107978

[287] [287] Arulkirubakaran D, Senthilkumar V and Kumawat V 2016 Effect of micro-textured tools on machining of Ti–6Al–4V alloy: an experimental and numerical approachInt. J. Refract. Hard Met.54165–77

[288] [288] Singh R, Dureja J S, Dogra M, Gupta M K, Mia M and Song Q H 2020 Wear behavior of textured tools under graphene-assisted minimum quantity lubrication system in machining Ti-6Al-4V alloyTribol. Int.145106183

[289] [289] Musavi S H, Sepehrikia M, Davoodi B and Niknam S A 2022 Performance analysis of developed micro-textured cutting tool in machining aluminum alloy 7075-T6: assessment of tool wear and surface roughnessInt. J. Adv. Manuf. Technol.1193343–62

[290] [290] Selvakumar S J, Muralidharan S M and Raj D S 2023 Performance analysis of drills with structured surfaces when drilling CFRP/AA7075 stack under MQL conditionJ. Manuf. Process.89194–219

[291] [291] Kmmel J, Braun D, Gibmeier J, Schneider J, Greiner C, Schulze V and Wanner A 2015 Study on micro texturing of uncoated cemented carbide cutting tools for wear improvement and built-up edge stabilisationJ. Mater. Process. Technol.21562–70

[292] [292] Niketh S and Samuel G L 2018 Drilling performance of micro textured tools under dry, wet and MQL conditionJ. Manuf. Process.32254–68

[293] [293] Ni J, Feng K, Zhuang K, Sang Z Q, Meng Z and Rahman M M 2022 Combined lubrication of surface texturing and copper covering for broaching toolInt. J. Adv. Manuf.1193617–29

[294] [294] Shah R, Gashi B, Hoque S, Marian M and Rosenkranz A 2021 Enhancing mechanical and biomedical properties of protheses—surface and material designSurf. Interfaces27101498

[295] [295] Marian M, Shah R, Gashi B, Zhang S, Bhavnani K, Wartzack S and Rosenkranz A 2021 Exploring the lubrication mechanisms of synovial fluids for joint longevity—a perspectiveColloids Surf.B206111926

[296] [296] Nagentrau M, Tobi A L M, Jamian S, Otsuka Y and Hussin R 2021 Delamination-fretting wear failure evaluation at HAp-Ti-6Al–4V interface of uncemented artificial hip implantJ. Mech. Behav. Biomed. Mater.122104657

[297] [297] Oonishi H, Ueno M, Kim S C, Oonishi H, Iwamoto M and Kyomoto M 2009 Ceramic versus cobalt-chrome femoral components; wear of polyethylene insert in total knee prosthesisJ. Arthroplasty24374–82

[298] [298] Jahn S, Seror J and Klein J 2016 Lubrication of articular cartilageAnnu. Rev. Biomed. Eng.18235–58

[299] [299] Gao L M, Yang P R, Dymond I, Fisher J and Jin Z M 2010 Effect of surface texturing on the elastohydrodynamic lubrication analysis of metal-on-metal hip implantsTribol. Int.431851–60

[300] [300] Roy T, Choudhury D, Ghosh S, Mamat A B and Pingguan-Murphy B 2015 Improved friction and wear performance of micro dimpled ceramic-on-ceramic interface for hip joint arthroplastyCeram. Int.41681–90

[301] [301] Pratap T and Patra K 2018 Mechanical micro-texturing of Ti-6Al-4V surfaces for improved wettability and bio-tribological performancesSurf. Coat. Technol.34971–81

[302] [302] Pratap T and Patra K 2020 Tribological performances of symmetrically micro-textured Ti-6Al-4V alloy for hip jointInt. J. Mech. Sci.182105736

[303] [303] Cui L L, Li H, Gong C Y, Huang J W and Xiong D S 2022 A biomimetic bilayer coating on laser-textured Ti6Al4V alloy with excellent surface wettability and biotribological properties for artificial jointsCeram. Int.4826264–73

[304] [304] Han Y J, Liu F, Zhang K D, Huang Q, Guo X H and Wang C D 2021 A study on tribological properties of textured Co-Cr-Mo alloy for artificial hip jointsInt. J. Refract. Hard Met.95105463

[305] [305] Meng X K, Bai S X and Peng X D 2014 Lubrication film flow control by oriented dimples for liquid lubricated mechanical sealsTribol. Int.77132–41

[306] [306] Ahmed A, Masjuki H H, Varman M, Kalam M A, Habibullah M and Al Mahmud K A H 2016 An overview of geometrical parameters of surface texturing for piston/cylinder assembly and mechanical sealsMeccanica519–23

[307] [307] Siripuram R B and Stephens L S 2004 Effect of deterministic asperity geometry on hydrodynamic lubricationJ. Tribol.126527–34

[308] [308] Brunetire N and Tournerie B 2012 Numerical analysis of a surface-textured mechanical seal operating in mixed lubrication regimeTribol. Int.4980–89

[309] [309] Adjemout M, Andrieux A, Bouyer J, Brunetire N, Marcos G and Czerwiec T 2017 Influence of the real dimple shape on the performance of a textured mechanical sealTribol. Int.115409–16

[310] [310] Shi L P, Wei W, Wang T, Zhang Y C, Zhu W and Wang X L 2020 Experimental investigation of the effect of typical surface texture patterns on mechanical seal performanceJ. Braz. Soc. Mech. Sci. Eng.42227