[1] [1] Shi Yusheng, Lu Zhongliang, Zhang Wenxian, et al.. The technology and equipment of selective laser melting[J]. China Surface Engineering, 2006, 19(5): 150-153.

[2] [2] Wu Weihui, Yang Yongqiang, Mao Guisheng. Morphology analysis of molten pools lapping and accumulation in selective laser melting of 316L stainless steel[J]. Manufacturing Technology & Machine Tool, 2014, (4): 46-49.

[3] [3] Wang Yunda, Yang Yongqiang, Song Changhui, et al.. Process optimization and electrochemical behavior of CoCrMo alloy fabricated by selective laser melting based on response surface method[J]. The Chinese Journal of Nonferrous Metals, 2014, 24(10): 2497-2505.

[4] [4] Song Changhui, Yang Yongqiang, Ye Ziheng, et al.. Development of freeform design and manufacturing based on selective laser melting [J]. Laser & Optoelectronics Progress, 2013, 50(8): 080026.

[5] [5] Wehmoller M, Warnke P H, Zilian C, et al.. Implant design and production-a new approach by selective laser melting[C]. International Congress Series, Elsevier, 2005, 1281: 690-695.

[6] [6] Campbell I, Bourell D, Gibson I. Additive manufacturing: Rapid prototyping comes of age[J]. Rapid Prototyping Journal, 2012, 18(4): 255-258.

[7] [7] Chen Xiaodong, Xing Wenzhong. Rapid prototyping technology and its application in prosthodontics[J]. Chinese Journal of Practical Stomatology, 2013, 6(6): 326-330.

[8] [8] Wang Di, Liu Ruicheng, Yang Yongqiang. Clearance design and process optimization of non-assembly mechanisms fabricated by selective laser melting[J]. Chinese J Lasers, 2014, 41(2): 0203004.

[9] [9] Li Ruidi, Wei Qingsong, Liu Jinhui, et al.. Research progress of key basic issue in selective laser melting of metallic powder[J]. Aeronautical Manufacturing Technology, 2015, (5): 26-31.

[10] [10] Wang D, Yang Y Q, Zhang M H, et al.. Study on SLM fabrication of precision metal parts with overhanging structures[C]. Assembly and Manufacturing (ISAM), IEEE, 2013: 222-225.

[11] [11] Yang Xiongwen, Yang Yongqiang, Liu Yang, et al.. Study on dimensional accuracy of typical geometric features manufactured by selective laser melting[J]. Chinese J Lasers, 2015, 42(3): 0303004.

[12] [12] Wang Xuyue, Wang Yanfei, Jiang Hao, et al.. Laser cladding forming of round thin-walled parts with slope angle[J]. Chinese J Lasers, 2014, 42(1): 0103006.

[13] [13] Mu Cunyuan, Liu Menglin, Li Nan. The negative step deviation in rapid prototyping and its reduction measurements[J]. Journal of Shenyang Jianzhu University (Natural Science), 2011, 27(2): 361-366.

[14] [14] Strano G, Hao L, Everson R M, et al.. Surface roughness analysis, modeling and prediction in selective laser melting[J]. Journal of Materials Processing Technology, 2013, 213(4): 589-597.

[15] [15] Yan C, Hao L, Hussein A, et al.. Advanced lightweight 316L stainless steel cellular lattice structures fabricated via selective laser melting [J]. Materials and Design, 2014, 55: 533-541.

[16] [16] Zhao Jinyan, Chou Yi, Liu Furong, et al.. Research of surface roughness and relative density of SLM medical Co-Cr alloy[J]. Applied Laser, 2014, 34(6): 524-527.

[17] [17] Lu Jianbin, Yang Yongqiang, Wang Di, et al.. Analysis of affecting factors of overhanging surface quality by selective laser melting[J]. Laser Technology, 2011, 35(2): 148-151.

[18] [18] Liu Ruicheng. The Study on Surface Roughness of Metal Parts Fabricated by Selective Laser Melting and the Application on Non-assembly Mechanisms[D]. Guangzhou: South China University of Technology, 2014: 36-39.

[19] [19] Lu Jianbin. Design Optimization and Process Study on Directly Manufacturing of Customized Precise Metal Parts by Selective Laser Melting [D]. Guangzhou: South China University of Technology, 2011: 26-27.

[20] [20] Gebhardt A, Hotter J S, Ziebura D. Impact of SLM build parameters on the surface quality[J]. Rapid Technologie Journal, 2014.

[21] [21] Sun Tingting, Yang Yongqiang, Guo Minghua. Analysis of the morphology of 316L stainless part formed by selective laser melting[J]. Laser Journal, 2009, 30(5): 68-70.