[1] Dai J J, Zhu J Y, Chen C Z et al. High temperature oxidation behavior and research status of modifications on improving high temperature oxidation resistance of titanium alloys and titanium aluminides: a review[J]. Journal of Alloys and Compounds, 685, 784-798(2016). http://www.sciencedirect.com/science/article/pii/S0925838816319351

[2] Zhang X H, Liu D X, Wang X F et al. The effect of TiN/Ti composite film and multilayer on fretting fatigue resistance of Ti811 alloy at elevated temperature[J]. Tribology, 29, 311-318(2009).

[3] Zhang T G, Sun R L. Microstructure and properties of nano-Ti3Al laser cladding layer prepared on Ti811 alloy surface[J]. Chinese Journal of Lasers, 45, 0102002(2018).

[4] Wang Y F, Xiao L J, Liu M X et al. Research progress of laser cladding amorphous coatings[J]. Laser & Optoelectronics Progress, 51, 070002(2014).

[5] Sun R L, Niu W, Lei Y W et al. Microstructure and tribological properties of laser clad NiCrBSi+Ni/MoS2 coating on TC4 titanium alloy[J]. Transactions of Materials and Heat Treatment, 35, 157-162(2014).

[6] Liu Y N, Sun R L, Niu W et al. Microstructure and friction and wear resistance of laser cladding composite coating on Ti811 surface[J]. Chinese Journal of Lasers, 46, 0102010(2019).

[7] Li J N, Chen C Z, Squartini T et al. A study on wear resistance and microcrack of the Ti3Al/TiAl+TiC ceramic layer deposited by laser cladding on Ti-6Al-4V alloy[J]. Applied Surface Science, 257, 1550-1555(2010).

[8] Candel J J, Amigó V, Ramos J A et al. Sliding wear resistance of TiCp reinforced titanium composite coating produced by laser cladding[J]. Surface and Coatings Technology, 204, 3161-3166(2010). http://www.sciencedirect.com/science/article/pii/S0257897210001878

[9] Maliutina I N, Si-Mohand H, Piolet R et al. Laser cladding of γ-TiAl intermetallic alloy on titanium alloy substrates[J]. Metallurgical and Materials Transactions A, 47, 378-387(2016). http://link.springer.com/article/10.1007/s11661-015-3205-9

[10] Kumar S, Mandal A, Das A K et al. Parametric study and characterization of AlN-Ni-Ti6Al4V composite cladding on titanium alloy[J]. Surface and Coatings Technology, 349, 37-49(2018). http://www.sciencedirect.com/science/article/pii/S0257897218305383

[11] Du T. Physical-chemistry effect of rare earth elements on metallic materials[J]. Acta Metallrugica Sinica, 33, 69-77(1997).

[12] Yang Y L, Zhang D, Yan W et al. Microstructure and wear properties of TiCN/Ti coatings on titanium alloy by laser cladding[J]. Optics and Lasers in Engineering, 48, 119-124(2010). http://www.sciencedirect.com/science/article/pii/S0143816609002048

[13] Weng F. Microstructure and wear property of ceramics reinforced metal matrix composite laser cladding coatings on titanium alloy[D]. Jinan: Shandong University(2017).

[14] Zhang J, Zhou J H. Research of combining capability in interface of bimetal hammer[J]. Hot Working Technology, 36, 28-30(2007).

[15] Zhang G Y, Wang C L, Gao Y et al. Effect of rare earth La2O3 on the microstructure of laser cladding Ni-based coatings on 6063 Al alloys[J]. Chinese Journal of Lasers, 41, 1103001(2014).

[16] Li J N[M]. Technology and application of laser cladding(2016).

[17] He Q K, Wang Y, Zhao W M et al. Cracking control technology of TiC/Ni coatings prepared by in situ fabrication through laser cladding[J]. Transactions of the China Welding Institution, 30, 21-24(2009).

[18] Wang H Y, Gao X Y, Ren H P et al. Density functional theory study on cerium occupying tendency and effecting mechanism in bcc α-Fe[J]. Rare Metal Materials and Engineering, 43, 2739-2742(2014).

[19] Fang H J, Sun J, Wang H B et al. Influence of alloy added trace cerium on microstructure and properties of 7136 aluminum[J]. Journal of the Chinese Society of Rare Earths, 34, 313-319(2016).

[20] Cai L F, Zhang Y Z, Xi M Z et al. In-situ synthesis of TiB+TiB2/Ti composite coating by laser cladding on titanium alloy surface. C]∥National Cast Steel and Smelting Academic Annual Meeting and China Nonferrous Metals Processing Industry Association. Wuhan: Special Casting & Nonferrous Alloys, 284-286(2006).

[21] Wen S Z, Huang P[M]. Principles of tribology, 348-349(2018).