Laser & Optoelectronics Progress, Volume. 60, Issue 15, 1514001(2023)

Simulation Analysis and Verification of Single Pulse Laser Paint Removal Morphology with Multi Physics Field

Guochun Liu*, Hongfei Zhou, Wenfeng Yang, Dehui Lin, and Guang'ao Chen
Author Affiliations
  • Aviation Engineering Institute, Civil Aviation Flight University of China, Guanghan618307, Sichuan, China
  • show less
    Figures & Tables(16)
    Schematic diagram of pulse laser cleaning principle
    Infrared nanosecond pulse laser
    Laser confocal microscopy
    Experimental ablation morphology
    Relationship between laser energy density and ablation depth
    Comparison of experimental and theoretical maximum ablation width
    Pulse laser paint removal model
    Topography of paint removal for temperature criterion under different powers
    Topography of paint removal for thermal stress criterion under different powers
    Comparison of paint removal morphology obtained by two criteria under different energy densities. (a) Ablation depth; (b) ablation width
    Single pulse ablation morphology at laser energy density of 21.66 J/cm².(a) Experiment;(b) double criteria; (c) temperature criterion; (d) section profiles of A-A
    • Table 1. Thermal characteristic of paint and substrate

      View table

      Table 1. Thermal characteristic of paint and substrate

      ParameterPaintSubstrate
      Density ρ/(kg·m-310622640

      Thermal conductivity λ /

      (W·m-1·℃-1

      0.3238
      Specific heat c /(J·kg-1·℃-12510950
      Melting point /℃151500-640
      Boiling point TB /℃165
      Young’s modulus Y /GPa1070
      Poisson’s ratio μ0.170.35
      Thermal expansion γ1.0×10-62.65×10-7
    • Table 2. Damage stress test results for paint

      View table

      Table 2. Damage stress test results for paint

      Sample number

      Local failure

      σ1 /MPa

      Complete failureσ2 /MPa
      16.38.9
      26.59.4
      37.68.7
    • Table 3. Results of laser energy density

      View table

      Table 3. Results of laser energy density

      ParameterSample number
      1234
      Average power P /W5.578.510
      Average energy densityφ/(J·cm-214.0117.8321.6625.48
    • Table 4. Morphology parameters of paint removal under different working conditions

      View table

      Table 4. Morphology parameters of paint removal under different working conditions

      NumberMaximum depthAverage depthMaximum widthAverage width
      P1-16.3034.96
      P1-26.786.7636.0036.02
      P1-37.2037.10
      P2-17.6041.13
      P2-28.308.1042.6642.29
      P2-38.4043.08
      P3-111.2054.48
      P3-212.2912.2356.2956.17
      P3-313.2057.74
      P4-114.1560.70
      P4-215.0015.1562.2862.08
      P4-316.3063.26
    • Table 5. Ablation volume at different laser powers

      View table

      Table 5. Ablation volume at different laser powers

      NumberExperiment /μm³Experimental average /μm³Double criteria /μm³Double criteria fitting degree /%Temperature criterion /μm³Temperature criterion fitting degree /%
      P1-13165.35
      P1-23300.503392.763182.2493.82929.7986.4
      P1-33712.43
      P2-15328.35
      P2-25461.305534.525146.6492.94658.6284.2
      P2-35813.91
      P3-113549.60
      P3-213695.8013815.5013055.6594.512309.1289.1
      P3-314201.10
      P4-121495.40
      P4-222105.3022268.6920487.1992.019461.0187.4
      P4-323205.37
    Tools

    Get Citation

    Copy Citation Text

    Guochun Liu, Hongfei Zhou, Wenfeng Yang, Dehui Lin, Guang'ao Chen. Simulation Analysis and Verification of Single Pulse Laser Paint Removal Morphology with Multi Physics Field[J]. Laser & Optoelectronics Progress, 2023, 60(15): 1514001

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: Lasers and Laser Optics

    Received: May. 23, 2022

    Accepted: Jun. 30, 2022

    Published Online: Aug. 18, 2023

    The Author Email: Guochun Liu (liuguochun@cafuc.edu.cn)

    DOI:10.3788/LOP221860

    Topics