[1] [1] SHRIVASTAVA A, MUKHERJEE S, CHAKRABORTY S S. Addressing the challenges in remanufacturing by laser-based material deposition techniques［J］. Optics & Laser Technology, 2021, 144: 107404.

[2] [2] ZHANG X C, CUI W Y, LI W, et al. A hybrid process integrating reverse engineering, pre-repair processing, additive manufacturing, and material testing for component remanufacturing［J］. Materials, 2019, 12(12): 1961.

[5] [5] XIE R S, CHEN G Q, ZHAO Y, et al. In-situ observation and numerical simulation on the transient strain and distortion prediction during additive manufacturing［J］. Journal of Manufacturing Processes, 2019, 38: 494-501.

[6] [6] BROWN D W, BERNARDIN J D, CARPENTER J S, et al. Neutron diffraction measurements of residual stress in additively manufactured stainless steel［J］. Materials Science and Engineering: A, 2016, 678: 291-298.

[7] [7] CHEN B W, MAZUMDER J. Role of process parameters during additive manufacturing by direct metal deposition of Inconel 718［J］. Rapid Prototyping Journal, 2017, 23: 919-929.

[8] [8] LIU Y, YANG Y Q, WANG D. A study on the residual stress during selective laser melting (SLM) of metallic powder［J］. The International Journal of Advanced Manufacturing Technology, 2016, 87(1): 647-656.

[9] [9] PARRY L, ASHCROFT I A, WILDMAN R D. Understanding the effect of laser scan strategy on residual stress in selective laser melting through thermo-mechanical simulation［J］. Additive Manufacturing, 2016, 12: 1-15.

[11] [11] SONG J, WU W H, ZHANG L, et al. Role of scanning strategy on residual stress distribution in Ti-6Al-4V alloy prepared by selective laser melting［J］. Optik, 2018, 170: 342-352.

[12] [12] BLACKFORD B, ZAK G, KIM I Y. The effect of scan path on thermal gradient during selective laser melting［J］.The International Journal of Advanced Manufacturing Technology, 2020, 110(5/6): 1261-1274.

[19] [19] KOLEVA E, TSONEVSKA T, KOLEVA L, et al. Heat distribution simulation in electron-beam surface modification of 316L stainless steel samples［J］. Journal of Physics: Conference Series, 2020, 1492(1): 012012.

[20] [20] KRUTH J P, DECKERS J, YASA E, et al. Assessing and comparing influencing factors of residual stresses in selective laser melting using a novel analysis method［J］. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2012, 226(6): 980-991.