[1] Luo G W[J]. Talking about the cause analysis and remedy of SC330 turnout disease Management Observer, 2010, 154-155.

[2] Lu G J, Yang K. The morphological characteristics and failure mechanism of rail damage[J]. Journal of the China Railway Society, 18, 120-124(1996).

[3] Li J H, Ding W, Li L et al. Analysis of common failure modes and characteristics of heavy haul rail welded joint[J]. Welding Technology, 45, 69-73(2016).

[4] Franklin F J, Weeda G J, Kapoor A et al. Rolling contact fatigue and wear behaviour of the infrastar two-material rail[J]. Wear, 258, 1048-1054(2005).

[5] Song L P. Laser surface modification and application[J]. Physics and Engineering, 20, 42-44(2010).

[6] Zhang T G, Zhuang H F, Xiao H Q et al. Effect of rare earth on microstructure and friction and wear properties of Ti-based laser cladding layer[J]. Chinese Journal of Lasers, 46, 0903001(2019).

[7] Wang D S, Tian Z J, Shen L D et al. Research status and development of laser cladding technology[J]. Applied Laser, 32, 538-544(2012).

[8] Li X W, Zhang C H, Zhang S et al. Developments of laser cladding technology[J]. Laser Journal, 28, 1-2(2007).

[9] Fu Z K, Wang W J, Ding H H et al. Effect of laser cladding Fe-based alloy on wear performance of wheel and rail steels[J]. Transactions of Materials and Heat Treatment, 36, 217-222(2015).

[10] Lewis S R, Lewis R[J]. Fletcher D I. Assessment of laser cladding as an option for repairing/enhancing rails. Wear, 330/331, 581-591(2015).

[11] Hu J, Guo H M, Wang W J et al[J]. Effect of laser cladding on friction and wear properties of wheel/rail materials Lubrication Engineering, 2012, 51-55.

[12] Wang X R, Wang X H, Shi G W et al. Effect of boron element on the microstructure and property of laser cladding Fe-Ti-V-C alloy system[J]. Chinese Journal of Lasers, 37, 1903-1907(2010).

[13] Maroli B, Dizdar S, Bengtsson S. Iron based hardfacing alloys for abrasive and impact wear[C]. International Thermal Spray Conference(2017).

[14] Darmawan W, Quesada J, Rossi F et al. Improvement in wear characteristics of the AISI M2 by laser cladding and melting[J]. Journal of Laser Applications, 21, 176-182(2009).

[15] Zhang X H, Chao M J, Liang E J et al. In-situ synthesis of TiC-ZrC particulate reinforced Ni-based composite coatings by laser cladding[J]. Chinese Journal of Lasers, 36, 998-1004(2009).

[16] Cui Z Q[M]. Metallurgy and heat treatment: professional use of casting and welding, 32-59(1998).

[17] Günter E, Ilyenko S . Ternary alloy systems[M]. [S.l.]: Springer Berlin Heidelberg, 279-302(2008).

[18] Dong R J[M]. Metallurgical principle(1980).

[19] Lentz J, Röttger A, Theisen W. Mechanism of the Fe3(B, C) and Fe23(C, B)6 solid-state transformation in the hypoeutectic region of the Fe-C-B system[J]. Acta Materialia, 119, 80-91(2016).

[20] Boccalini M, Goldenstein H. Solidification of high speed steels[J]. International Materials Reviews, 46, 92-115(2001).

[21] Niu H J. Chang I T H. Microstructural evolution during laser cladding of M2 high-speed steel[J]. Metallurgical and Materials Transactions A, 31, 2615-2625(2000).

[22] Santhanam A T, Tierney P, Hunt J L. Cemented carbides[M]. ∥Properties and selection: nonferrous alloys and special-purpose materials. America: ASM International, 2, 950-977(1990).

[23] Gauthier M M. Crystallography and engineering properties of ceramics[M]. ∥Engineered materials handbook desk edition. America: ASM International, 922-975(1995).

[24] Hu G X, Cai X, Rong Y H[M]. Fundamentals of materials science, 167-223(2000).