[1] [1] RAMLY R, KUNTJORO W, ABD-RAHMAN M K. Embedded FBG sensor in aircraft smart composite materials for structural monitoring［J］. Applied Mechanics and Materials,2013, 393:311-316.

[2] [2] BAERE I, LUYCKX G, VOET E, et al. On the feasibility of optical fibre sensors for strain monitoring in thermoplastic composites under fatigue loading conditions［J］. Optics and Lasers in Engineering,2009, 47: 403-411.

[3] [3] SIKDAR S, OSTACHOWICZ W, PAL J. Damage-induced acoustic emission source identification in an advanced sandwich composite structure［J］.Steel and Composite Structures, 2018, 202 : 860-866.

[4] [4] HU N M, CHEN Ch H, HOU H L, et al. Simulation research on damage characteristics of composite laminated plates under high-speed projectile impact ［J］. Weapon Material Science and Engineering, 2017, 40（30）: 66-69(in Chinese).

[5] [5] YU T Y, ZHANG Z Y, SONG Sh T, et al. Tensile and flexural behaviors of additively manufactured continuous carbon fiber-reinforced polymer composites［J］. Composite Structures, 2019(225): 111147.

[6] [6] KOZIOL M, FIGLUS T. Evaluation of the failure progress in the static bending of GFRP laminates reinforced with a classic plain-woven fabric and a 3D fabric, by means of the vibrations analysis［J］. Polymers & Polymer Composites,2017, 38: 1070-1085.

[7] [7] HO M, LAU K, AU H, et al. Structural health monitoring of an asymmetrical SMA reinforced composite using embedded FBG sensors［J］. Smart Materials & Structures, 2013, 22(12):125015.

[8] [8] GAO L L. Development and application of fiber grating sensor encapsulated by resin-based composite material［D］. Ji’nan: Shandong University, 2018: 27-33 (in Chinese).

[9] [9] MONIKA P, WALDEMAR S. Analysis of the possibility of non-de- structive testing to detect defects in multi-layered composites reinforced fibers by optical IR thermography ［J］.Composite Structures,2019, 213: 204-208.

[10] [10] BEHESHTIZADEH N, MOSTAFAPOUR A, ABBASI H. Effect of fiber layout on signal analyzing of carbon/glass/epoxy hybrid composite laminates flexural loading using acoustic emission measurement［J］. Journal of the International Measurement Confederation, 2019, 136: 608-614.

[11] [11] SUN J X. Research on composite material curing and impact damage monitoring based on bragg grating sensing［D］. Wuhan: Wuhan University of Technology, 2011: 8-20(in Chinese).

[12] [12] KIRKBY E, OLIVEIRA R D, MICHAUD V, et al. Impact localisation with FBG for a self-healing carbon fibre composite structure［J］. Composite Structures, 2011, 94(1):8-14.

[13] [13] KOZIOL M, FIGLUS T. Evaluation of the failure progress in the static bending of GFRP laminates reinforced with a classic plain-woven fabric and a 3D fabric, by means of the vibrations analysis［J］.Polymers & Polymer Composites, 2017, 38: 1070-1085.

[14] [14] REN T X. Research on optimal configuration of FBG sensors in damage detection of composite materials［D］. Qinhuangdao: Yanshan University, 2017: 43-51 (in Chinese).

[15] [15] WANG Q L. Numerical value of thermal curing process of carbon fiber composite material and fiber grating monitoring［D］. Ji’nan:Shandong University, 2018: 37-44 (in Chinese).

[16] [16] ANTONUCCI V, CUSANO A, GIORDANO M, et al. Cure-induced residual strain build-up in a thermoset resin［J］.Composites, 2006, A37(4): 592-601.

[17] [17] GU Sh Q, LIU Y F, LI J, et al. High-speed impact performance of carbon fiber/epoxy resin composite［J］, Materials Engineering, 2019, 7(8):110-117(in Chinese).

[18] [18] DONG B, TIAN L, PAN B. Tensile testing of carbon fiber multifilament using an advanced video extensometer assisted by dual-reflector imaging［J］. Measurement, 2019, 138: 325-331.

[19] [19] MICLOS S, SAVASTRU D, SAVASTRU R, et al. Transverse mechanical stress and optical birefringence induced into singlemode optical fibre embedded in a smart polymer composite material［J］. Composite Structures, 2019, 218: 15-26.

[20] [20] CHOI B, KWON I. Damage mapping using strain distribution of an optical fiber embedded in a composite cylinder after low-velocity impacts［J］.Composites,2019, B173: 107009.

[21] [21] TIBOR C. Analysis of the applicability of optical fibers as sensors for the structural health monitoring of polymer composites: The relationship between attenuation and the deformation of the fiber Gergely Heged［J］.Sensors and Actuators, 2018, A272: 206-211.

[22] [22] LIU T Y, MEI H Y, SUN Q, et al. Application of neural network in fault location of optical transport network［J］. China Communications, 2019, 16(10):214-225.