[1] Li S M[M]. Mechanical fatigue and reliability design(2006).

[2] Zhang G D, Su B, Wang H et al. Effect of elastic modulus on low cycle fatigue performance parameters[J]. Journal of Aeronautical power, 20, 768-771(2005).

[3] Wang Y F, Wu X Y, Pan Z Y et al. Effect of elastic modulus on the VIV-induced fatigue damage in deep sea risers[J]. Journal of Ship Mechanics, 11, 867-878(2007).

[4] Meng B, Wang W H, Zhang Y Y et al. Size effect on plastic anisotropy in microscale deformation of metal foil[J]. Journal of Materials Processing Technology, 271, 46-61(2019).

[5] Shimizu T, Ogawa M, Yang M et al. Plastic anisotropy of ultra-thin rolled phosphor bronze foils and its thickness strain evolution in micro-deep drawing[J]. Materials & Design, 56, 604-612(2014).

[6] Zhan Y, Xue J C, Liu C S. Numerical simulation of laser ultrasonic elastic constant measurement based on Abaqus[J]. Chinese Journal of Lasers, 42, 0508002(2015).

[7] Li X X, Zhao J F, Pan Y D. On the measurement method of material constants based on laser ultrasonic field testing system[J]. Journal of Experimental Mechanics, 31, 352-360(2016).

[8] Dong L M, Ni C Y, Shen Z H et al. Determination of elastic constants of materials based on the velocity measurement of laser-generated multi-mode ultrasound[J]. Chinese Journal of Lasers, 38, 0408004(2011).

[9] Shi J M, Zheng D, Pan W et al. Research on FBG ultrasonic sensor based on coupling cone structure and its nondestructive testing[J]. Acta Optica Sinica, 39, 1206004(2019).

[10] Hayashi Y, Ogawa S, Cho H et al. Non-contact estimation of thickness and elastic properties of metallic foils by laser-generated Lamb waves[J]. NDT & E International, 32, 21-27(1999).

[11] Ponschab M, Kiefer D A, Rupitsch S J. Simulation-based characterization of mechanical parameters and thickness of homogeneous plates using guided waves[J]. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 66, 1898-1905(2019).

[12] Spicer J B. McKie A D W, Wagner J W. Quantitative theory for laser ultrasonic waves in a thin plate[J]. Applied Physics Letters, 57, 1882-1884(1990).

[13] Sale M, Rizzo P, Marzani A. Semi-analytical formulation for the guided waves-based reconstruction of elastic moduli[J]. Mechanical Systems and Signal Processing, 25, 2241-2256(2011).

[14] Shen Z H, Xu B Q, Ni X W et al. Numerical simulation of pulsed laser induced ultrasound in monolayer and double layer materials[J]. Chinese Journal of Lasers, 31, 1275-1280(2004).

[15] Cao D D, Wang K S, Yan Y N. Simulation of laser-generated single-mode lamb wave by finite element method[J]. Journal of Nanjing University of Aeronautics & Astronautics, 42, 483-487(2010).

[16] Han X H, Li Y, Zhou Q X et al. Interference of lamb waves at overlap joints[J]. Chinese Journal of Mechanical Engineering, 53, 87-93(2017).

[17] Viktorov I A[M]. Rayleigh and Lamb waves: Physical theory and applications(1967).

[18] Xu W, Shen Z H, Ni C Y et al. The influence of temperature on the Lamb wave of zero group velocity in thin plate[J]. Chinese Journal of Lasers, 46, 1202005(2019).

[19] Zhan Y, Liu C S, Xue J C. Simulation of laser ultrasonic detection micro crack by equivalent load method[J]. Infrared and Laser Engineering, 45, 64-68(2016).

[20] Shen Z H, Yuan L, Zhang H C[M]. Laser ultrasound in solids(2015).

[21] Li Y, Cai G X, Dong R Q. The reflection and transmission of Lamb waves at overlap joints[J]. Acta Acustica, 42, 495-503(2017).

[22] Lu P X, Wang D, Li Y. Laser ultrasonic C-scan test method of stiffener width[J]. Laser & Optoelectronics Progress, 57, 171203(2020).

[23] Yang L J, Li Y, Sun J J et al. Reflection and transmission of laser ultrasonic surface waves on surface defects[J]. Laser & Optoelectronics Progress, 56, 041203(2019).