[4] [4] LAI Q, ABRAHAMS R, YAN W Y, et al. Influences of depositing materials, processing parameters and heating conditions on material characteristics of laser-cladded hypereutectoid rails［J］. Journal of Materials Processing Technology, 2019, 263: 1-20.

[6] [6] SHI Y, LI Y F, LIU J, et al. Investigation on the parameter optimization and performance of laser cladding a gradient composite coating by a mixed powder of Co50 and Ni/WC on 20CrMnTi low carbon alloy steel［J］. Optics Laser Technology, 2018, 99: 256-270.

[7] [7] LIAN G F, ZHAO C M, ZHANG Y, et al. Forming control in single-track laser cladding on crankshaft based on multiobjective optimization［J］. JOM, 2021, 73(12): 4319-4327.

[8] [8] LIAN G F, XIAO S H, ZHANG Y, et al. Multi-objective optimization of coating properties and cladding efficiency in 316L/WC composite laser cladding based on grey relational analysis［J］. The International Journal of Advanced Manufacturing Technology, 2021, 112(5): 1449-1459.

[9] [9] GUO S. R, ZHAO Y, CUT L J , et al.Using response surface methodology (RSM) to optimize the key laser processing parameters for laser cladding of grey cast iron［J］. Lasers in Engineering. 2021(1-5) :75-95.

[10] [10] LIANG Z G, ZHAN J M, SHI W Q,et al.Parameters optimization of the laser cladding of a Fe-based VC composite coating using response surface methodology (RSM)［J］. Lasers in Engineering. 2021(4-6):179-203.

[11] [11] MANIKANDAN N, RAJU R, PALANISAMY D, et al. Investigation on Ti6Al4V laser metal deposition using Taguchi based grey approach［J］. Materials Today: Proceedings, 2018, 5(6): 14375-14383.

[12] [12] RAVI KUMAR S M, KULKARNI S K. Analysis of hard machining of titanium alloy by taguchi method［J］. Materials Today: Proceedings, 2017, 4(10): 10729-10738.

[13] [13] CHEN T, WU W N, LI W P, et al. Laser cladding of nanoparticle TiC ceramic powder: Effects of process parameters on the quality characteristics of the coatings and its prediction model［J］.Optics & Laser Technology, 2019, 116: 345-355.

[14] [14] BALARAM NAIK A, CHENNAKESHAVA REDDY A. Optimization of tensile strength in TIG welding using the Taguchi method and analysis of variance (ANOVA)［J］. Thermal Science and Engineering Progress, 2018, 8: 327-339.

[15] [15] ILO S, JUST C, XHIKU F. Optimization of multiple quality characteristics of hardfacing using grey-based Taguchi method［J］. Materials & Design, 2012, 33: 459-468.

[16] [16] REDDY V S, BRAHMA R K, VENKATA S K. Optimization of welding parameters of Ti6Al4V cruciform shape weld joint to improve weld strength based on taguchi method［J］. Materials Today: Proceedings, 2018, 5(2): 4948-4957.

[17] [17] YAN J H, LI L. Multi-objective optimization of milling parameters-the trade-offs between energy, production rate and cutting quality［J］. Journal of Cleaner Production, 2013, 52: 462-471.

[18] [18] YAN J H, LI L. Energy efficiency optimization of turning conditions using taguchi method grey analysis［J］. Applied Mechanics and Materials, 2012, 197: 316-320.

[19] [19] TZENG C J, LIN Y H, YANG Y K, et al. Optimization of turning operations with multiple performance characteristics using the Taguchi method and grey relational analysis［J］. Journal of Materials Processing Technology, 2009, 209(6): 2753-2759.

[20] [20] YU T B, YANG L, ZHAO Y, et al. Experimental research and multi-response multi-parameter optimization of laser cladding Fe313［J］. Optics Laser Technology, 2018, 108: 321-332.