[1] [1] ZHOU L J, ZHAO Q, DU N, et al. Adjustment and regeneration of TC4 titanium alloy chemical milling groove fluid ［J］. Surface Technology, 2018, 47(4): 190-195(in Chinese).

[2] [2] LIU H J, QIAO Y L, DONG Y, et al. Study on treatment of aluminum alloy milling cleaning fluid by fenton oxidation ［J］. Surface Technology, 2017, 46(2): 220-223(in Chinese).

[3] [3] YI H Zh, DENG F Y, ZHANG Zh T. Research on chemical milling technology of 2197 Al-Li alloy ［J］. Surface Technology, 2010, 39(4): 73-76(in Chinese).

[4] [4] LI Q S, WANG J H, HU W B. Optimizations of electric current assisted chemical milling condition of 2219 aluminum alloy［J］. Journal of Materials Processing Technology, 2016, 249: 379-385.

[5] [5] HOT J, DASQUE A, TOPALOV J, et al. Titanium valorization: From chemical milling baths to air depollution applications［J］. Journal of Cleaner Production, 2020, 249: 119344.

[6] [6] EVANGELOS N, ARISTOMENIS A. FEM modeling and simulation of kerf formation in the nanosecond pulsed laser engraving process［J］. CIRP Journal of Manufacturing Science and Technology, 2021, 35: 236-249.

[7] [7] ZHAI Zh Y, MEI X S, WANG W J, et al. Research progress of laser etching technology of silicon carbide ceramic matrix composites ［J］. Chinese Journal of Lasers, 2020, 47(6): 600002(in Chinese).

[8] [8] ZHAI Z Y, WANG W J, ZHAO J, et al. Influence of surface morphology on processing of C/SiC composites via femtosecond laser［J］. Composites, 2017, A102: 117-125.

[9] [9] ZHAI Z Y, WEI C, ZHANG Y C, et al. Investigations on the oxidation phenomenon of SiC/SiC fabricated by high repetition frequency femtosecond laser［J］. Applied Surface Science, 2020, 502: 144131.

[10] [10] LIU C, ZHANG X Z, GAO L, et al. Feasibility of micro-hole machining in fiber laser trepan drilling of 2.5D Cf/SiC composite: Experimental investigation and optimization［J］. Optik, 2021, 242: 167186.

[11] [11] CHEONG H G, CHU C N, KWON K K, et al. Micro-structuring silicon compound ceramics using nanosecond pulsed laser assisted by hydrothermal reaction［J］. Journal of Manufacturing Processes, 2020, 50: 34-46.

[12] [12] LI H Y, YANG F, GUO J W, et al. The development status and prospect of laser cleaning［J］. Laser Technology, 2021, 45(5): 654-661(in Chinese).

[13] [13] ZHU X W, HU L, YANG W F, et al. Laser degumming process algorithm based on block scanning of CFRP fiber woven mesh［J］. Laser Technology, 2021, 45(6): 745-750(in Chinese).

[14] [14] KIRILLOV A G, SAKEVICH V N, TROCHIMCZUK R. Automated laser engraving system for the calibration and manufacturing of nonlinear scales for electrical measuring instruments［J］. Proceedings of the Institution of Mechanical Engineers, 2019, E233(4): 849-856.

[15] [15] HONG Sh, ZOU S H, WANG Sh D, et al. Feasibility analysis of laser engraving on aluminum alloy surface milling protective adhesive layer ［J］. Plating and Finishing, 2018, 37(24): 1139-1142(in Chinese).

[16] [16] YAO F P, FANG L J, LI J H, et al. Effect of laser power on temperature field and stress field of laser cladding Ni-based coatings［J］. Journal of Plastic Engineering, 2021, 28(11): 87-94(in Ch-inese).

[17] [17] LIU D D. Thermal behavior study and numerical simulation of thermal barrier coating micro topography［D］. Chengdu: Southwest Jiaotong University, 2018: 45-56(in Chinese).

[18] [18] XIE L S, CHEN X Y, YAN H P, et al. Experimental research on the technical parameters of laser engraving［J］. Journal of Physics, 2020, 1646(1): 012091.

[19] [19] WU T. Numerical simulation of multiphysics coupling based on laser cladding of iron matrix composites［D］. Shanghai: East China Jiaotong University, 2020: 21-23(in Chinese).

[20] [20] CHAI Q, FANG C, QIU X L, et al. Modeling of temperature field and profile of Ni60AA formed on cylindrical 316 stainless steel by laser cladding［J］. Surface and Coatings Technology, 2021, 428: 127865.

[21] [21] LIAO H X, SONG P, ZHOU H H, et al. Effects of ceramic layer and interface porosity on the life and failure mechanisms of thermal barrier coatings［J］. Journal of Composite Materials, 2016, 33(8): 1785-1793(in Chinese).

[22] [22] RAD M R, FARRAHIA G H, AZADI M, et al. Stress analysis of thermal barrier coating system subjected to out-of-phase thermo-mechanical loadings considering roughness and porosity effect［J］. Surface and Coatings Technology, 2015, 262: 77-86.

[23] [23] WANG R J, DUAN W Q, WANG K D, et al. Computational and experimental study on hole evolution and delamination in laser drilling of thermal barrier coated nickel superalloy［J］. Optics and Lasers in Engineering, 2018, 107:161-175.