[1] [1] Wang Jing, Wang Zhengfang, Sui Qingmei. Study of FBG stain distribution based on improved genetic algorithm dual constraint [J]. Chinese J Lasers, 2012, 39(3): 0305004.

[2] [2] Zhang Limin, Zhang Bin, Yang Fei. Design and test of force actuator in active optical system [J]. Opt Precision Engineering, 2012, 20(1): 38-44.

[3] [3] Bi Yong, Zhai Jia, Wu Jinhu, et al.. One method for mirror surface figure treatment in optical instrument [J]. Optical Technique, 2009, 35(1): 10-17.

[4] [4] Wang Dong, Yang Hongbo, Chen Changzheng. Computer simulation of the optical surface [J]. Computer Simulation, 2007, 24(2): 298-301.

[5] [5] Zhang Wei, Liu Jianfeng, Long Funian, et al.. Study on wavefront fitting using Zernike polynomials [J]. Optical Technique, 2005, 31(5): 675-678.

[6] [6] Lin Xudong, Liu Xinyue, Wang Jianli, et al.. Performent of correction capability of 137-element deformable mirror [J]. Opt Precision Engineering, 2013, 21(2): 267-273.

[7] [7] Zhang Jingxu. Overview of structure of technologies of large aperture ground based telescope [J]. Chinese Optics, 2012, 5(4): 327-336.

[8] [8] Ni Mingyang, Gong Yan. Design and analysis of kinematic lens positioning structure in lithographic projection objective [J]. Chinese Optics, 2012, 5(5): 476-483.

[9] [9] Shao Liang, Yang Fei, Wang Fuguo, et al.. Design and optimization of supporting system for 1.2 m lightweight SiC primary mirror [J]. Chinese Optics, 2012, 5(3): 229-234.

[10] [10] Shi Xiaoyu, Feng Yong, Chen Yin. A novel predictive controller in the adaptive optics control system based on parallelization method [J]. Acta Optica Sinica, 2012, 32(8): 08010050.

[11] [11] Zhao Hongchao, Zhang Jingxu, Yang Fei, et al.. Preloading eight-van spider for supporting structure of secondary mirror [J]. Opt Precision Engineering, 2013, 21(5): 1199-1204.

[12] [12] Wolfgang Dierking. RMS slope of exponentially correlated surface roughnessfor radar applications [J]. IEEE Transaction on Geoscience and Remote Sensing, 2000, 38(3): 1451-1454.

[13] [13] Ross Zhelem. Specification of optical surface accuracy using the structure function [C]. SPIE, 2011, 8083: 808310.

[14] [14] Wang Qingfeng, Cheng Dewen, Wang Yongtian. Description of free-form optical curved surface using two-variable orthogonal polynomials [J]. Acta Optica Sinica, 2012, 32(9): 0922002.

[15] [15] Wu Xiaoxia, Wang Minghao, Ming Ming, et al.. Calibration of thermal distortion for large aperture SiC lightweight mirror [J]. Opt Precision Engineering, 2012, 20(6): 1243-1249.

[16] [16] Wang Xu. Fabrication of SiC mirror in full aperture with optimized fixed abrasive polishing pad [J]. Opt Precision Engineering, 2012, 20(10): 2123-2131.

[17] [17] Cheng Jingquan. Principles of Astronomical Telescope Design [M]. Charlottesville: Springer, 2003.

[18] [18] TMT Group. Design Requirements Document for Tertiary Mirror System (M3S) [Z]. TMT.OPT.DRD.07.006.REL29. 2012.