[1] Liang X, Li B S, Fu L Y et al. Mechanical drilling of PCB micro hole and its application in micro ultrasonic powder molding[J]. Circuit World, 41, 87-94(2015).

[2] Cauwe M, Vandevelde B, Nawghane C et al. High-density interconnect technology assessment of printed circuit boards for space applications[J]. Journal of Microelectronics and Electronic Packaging, 17, 79-88(2020).

[3] Hasan M, Zhao J W, Jiang Z Y. A review of modern advancements in micro drilling techniques[J]. Journal of Manufacturing Processes, 29, 343-375(2017).

[4] Owen M, Roelants E, Van Puymbroeck J. Laser drilling of blind holes in FR4/glass[J]. Circuit World, 24, 45-49(1998).

[5] Kestenbaum A, D'Amico J F, Blumenstock B J et al. Laser drilling of microvias in epoxy-glass printed circuit boards[J]. IEEE Transactions on Components, Hybrids, and Manufacturing Technology, 13, 1055-1062(1990).

[6] Fang X Y, Yung K C. Copper direct drilling with tea CO2 laser in manufacture of high-density interconnection printed circuit board[J]. IEEE Transactions on Electronics Packaging Manufacturing, 29, 145-149(2006).

[7] Zhou G Y, Li W B, Xiang Q Y et al. Copper induced direct CO2 laser drilling blind hole with the aid of brown oxidation for PCB CCL[J]. Applied Surface Science, 479, 512-518(2019).

[8] Moorhouse C J, Villarreal F J, Baker H J et al. Laser drilling of copper foils for electronics applications[J]. IEEE Transactions on Components and Packaging Technologies, 30, 254-263(2007).

[9] Watson M N. Laser drilling of printed circuit boards[J]. Circuit World, 11, 13-29(1984).

[10] Dunsky C. High-speed microvia formation with UV solid-state lasers[J]. Proceedings of the IEEE, 90, 1670-1680(2002).

[11] Kim K R, Cho J H, Lee N Y et al. High-precision and ultrafast UV laser system for next-generation flexible PCB drilling[J]. Journal of Manufacturing Systems, 38, 107-113(2016).

[12] Franz D, Häfner T, Kunz T et al. Ultrashort pulsed laser drilling of printed circuit board materials[J]. Materials, 15, 3932(2022).

[13] Liu F H, Zhang R, Khurana G et al. Smaller microvias for packaging interconnects by picosecond UV laser with a nanometer metal barrier layer: a feasibility study[J]. IEEE Transactions on Components, Packaging and Manufacturing Technology, 10, 1411-1418(2020).

[14] Lee D. Picosecond IR pulsed laser drilling of copper-coated glass/epoxy composite[J]. IEEE Transactions on Components, Packaging and Manufacturing Technology, 7, 2066-2072(2017).

[15] Lei W S, Davignon J. Solid state UV laser technology for electronic packaging applications[J]. Proceedings of SPIE, 5629, 314-326(2005).

[16] Romoli L, Vallini R. Experimental study on the development of a micro-drilling cycle using ultrashort laser pulses[J]. Optics and Lasers in Engineering, 78, 121-131(2016).

[17] Mincuzzi G, Faucon M, Kling R. Novel approaches in zero taper, fast drilling of thick metallic parts by ultra-short pulse laser[J]. Optics and Lasers in Engineering, 118, 52-57(2019).

[18] Zhu Q C, Fan P X, Li N et al. Femtosecond-laser sharp shaping of millimeter-scale geometries with vertical sidewalls[J]. International Journal of Extreme Manufacturing, 3, 045001(2021).

[19] Qiao Y Q, Yang H Z, Ding Y H et al. Large scanning field laser concurrent drilling system with a five-axis independent control for special-shaped holes[J]. Optics Express, 31, 572-584(2022).

[20] Hejjaji A, Singh D, Kubher S et al. Machining damage in FRPs: laser versus conventional drilling[J]. Composites Part A: Applied Science and Manufacturing, 82, 42-52(2016).

[21] Bhaskar V, Kumar D, Singh K K. Laser processing of glass fiber reinforced composite material: a review[J]. Australian Journal of Mechanical Engineering, 17, 95-108(2019).