[1] [1] P Zeng. Biocompatible alumina ceramic for total hip replacements[J]. Mater Sci Technol, 2008, 24(5): 505-516.

[2] [2] E Medvedovski. Alumina-mullite ceramics for structural applications [J]. Ceram Int, 2006, 32(4): 369-375.

[3] [3] J A Dever, M V Nathal, J A DiCarlo. Research on high-temperature aerospace materials at NASA glenn research center[J]. J Aerosp Eng, 2013, 26(2): 500-514.

[4] [4] V K Balla, S Bose, A Bandyopadhyay. Processing of bulk alumina ceramics using laser engineered net shaping[J]. Int J Appl Ceram Tec, 2008, 5(3): 234-242.

[5] [5] S A Bernard, V K Balla, Susmita Bose, et al.. Direct laser processing of bulk lead zirconate titanate ceramics[J]. Mater Sci Eng B, 2010, 172(1): 85-88.

[6] [6] R Comesana, F Lusquinos, J d Val, et al.. Calcium phosphate grafts produced by rapid prototyping based on laser cladding[J]. J Eur Ceram Soc, 2011, 31(1-2): 29-41.

[7] [7] A J Pinkerton. An analytical model of beam attenuation and powder heating during coaxial laser direct metal deposition[J]. J Phys D: Appl Phys, 2007, 40(23): 7323–7334.

[8] [8] Xi Mingzhe, Yu Gang, Zhang Yongzhong, et al.. Interaction of the laser beam and the metal powder conveyed by coaxial powder feeder[J]. Chinese J Lasers, 2005, 32(4): 562-566.

[9] [9] Yang Xichen, Li Li, Zhang Ye. Numerical simulation of temperature field of coaxial powder flow in laser cladding[J]. Acta Optica Sinica, 2009, 29(11): 3114-3120.

[10] [10] Jin Shaowei, He Xiuli, Wu Yang, et al.. Laser power attenuation by powder flow in coaxial laser cladding[J]. Chinese J Lasers, 2011, 38(9): 73-78.

[11] [11] Liu Hao, Yu Gang, He Xiuli, et al.. Effect of powder properties on the convergence of powder stream in coaxial laser cladding[J]. Chinese J Laser, 2013, 40(5): 0503008.

[12] [12] Liu Hao, Yu Gang, He Xiuli, et al.. Three-dimensional numerical simulation of transient temperature field and coating geometry in powder feeding laser cladding[J]. Chinese J Lasers, 2013, 40(12): 1203007.

[13] [13] Wu Dongjiang, Lu Weifeng, Chen Yunxiao, et al.. Experimental study on ceramic of ZrO2- 13% Al2O3 by laser engineered net shaping[J]. Chinese J Lasers, 2012, 39(7): 0703004.

[14] [14] A J Pinkerton, Lin Li. Modelling powder concentration distribution from a coaxial deposition nozzle for laser-based rapid tooling[J]. J Mater Sci Eng, 2004, 12(6): 33-41.

[15] [15] Lin J. Laser Attenuation of the focused powder streams in coaxial laser cladding[J]. J Laser Appl, 2000, 12(1): 28-33.

[16] [16] J Ibarra-Medinaa, A J Pinkerton. A CFD model of the laser, coaxial powder stream and substrate interaction in laser cladding[J]. Physics Procedia, 2010, 5: 337-346.

[17] [17] Yu Jun, Chen Jing, Tan Hua, et al.. Effect of process parameters in the laser rapid forming on deposition layer[J]. Chinese J Lasers, 2007, 34(7): 1014-1018.

[18] [18] Wu Dongjiang, Sun Bei, Niu Fangyong, et al.. Microstructure and crack in color Al2O3 samples by laser engineered net shaping[J]. J Chin Ceram Soc, 2013, 41(12): 1621-1626.