[1] [1] B Sarma, K S Ravi Chandran. Accelerated kinetics of surface hardening by diffusion near phase transition temperature: mechanism of growth of boride layers on titanium[J]. Acta Materialia, 2011, 59(10): 4216-4228.

[2] [2] Xianglong Guo, Liqiang Wang, Minmin Wang, et al.. Effects of degree of deformation on the microstructure, mechanical properties and texture of hybrid-reinforced titanium matrix composites[J]. Acta Materialia, 2012, 60(6): 2656-2667.

[3] [3] Zhang Weiping, Ma Haibo, Chen Tianyun, et al.. In-situ synthesis of ceramic particle reinforced co-based alloy composite coating by laser cladding[J]. Chinese J Lasers, 2009, 36(12): 3277-3281.

[4] [4] Feng Shurong, Tang Haibo, Zhang Shuquan, et al.. Microstructure and wear resistance of laser clad TiB-TiC/TiNi-Ti2Ni intermetallic coating on titanium alloy[J]. Transactions of Nonferrous Metals Society of China, 2012, 22(7): 1667-1673.

[5] [5] Abachi P, Masoudi A, Purazrang K. Dry sliding wear behavior of SiCp/QE22 magnesium alloy matrix composites[J]. Materials Science and Engineering, 2006, 435-436(5): 653-657.

[6] [6] Alahelisten A, Bergman F, Olsson M, et al.. On the wear of aluminium and magnesium metal matrix composite[J]. Wear, 1993, 165(2): 221-226.

[7] [7] Jyotsna Dutta Majumdar, Lin Li. Development of titanium boride (TiB) dispersed titanium (Ti) matrix composite by direct laser cladding[J]. Materials Letters, 2010, 64(9): 1010-1012.

[8] [8] M Li, J Huang, Y Y Zhu, et al.. Effect of heat input on the microstructure of in-situ synthesized TiN- TiB/Ti based composite coating by laser cladding[J]. Surface & Coatings Technology, 2012, 206(19): 4021-4026.

[9] [9] Jun Li, Zhishui Yu, Huiping Wang. Wear behaviors of an (TiB+TiC)/Ti composite coating fabricated on Ti6Al4V by laser cladding[J]. Thin Solid Films, 2011, 519(15): 4804-4808.

[10] [10] Liang Jing, Gao Mingyuan, Liu Changsheng, et al.. Laser induced in-situ formation of titanium composite coatings[J]. Chinese J Lasers, 2009, 36(12): 3272-3276.

[11] [11] Mitun Das, Vamsi Krishna Balla, Debabrata Basu, et al.. Laser processing of in situ synthesized TiB-TiN-reinforced Ti6Al4V alloy coatings[J]. Scripta Materialia, 2012, 66(8): 578-581.

[12] [12] Feng Shurong, Zhang Shuquan, Wang Huaming. Wear resistance of laser clad particles reinforced intermetallic composite coating on TA15 alloy[J]. Chinese J Lasers, 2012, 39(2): 0203002.

[13] [13] S Gorsse, D B Miracle. Mechanical properties of Ti-6Al-4V/TiB composites with randomly oriented and aligned TiB reinforcements[J]. Acta Materialia, 2003, 51(9): 2427-2442.

[14] [14] Indrani Sen, K Gopinath, Ranjan Datta, et al.. Fatigue in Ti-6Al-4V-B alloys[J]. Acta Materialia, 2010, 58(20): 6799-6809.

[15] [15] Ma Xiaoyan, Liang Guozheng, Jia Qiaoying. Applications of whiskers in composites[J]. Materials Review, 2001, 7(15): 44-46.

[16] [16] Weijie Lu, Di Zhang, Xiaonong Zhang, et al.. Microstructural characterization of TiB in in situ synthesized titanium matrix composites prepared by common casting technique[J]. Journal of Alloys and Compounds, 2001, 327(1): 240-247.

[17] [17] Lin Yinghua, Chen Zhiyong, Li Yuehua, et al.. Microstructure and hardness characteristic of in-situ synthesized TiB coating by laser cladding on TC4 titanium alloy[J]. Infrared and Laser Enginering, 2012, 41(10): 2694-2698.

[18] [18] Anstis G R, Chantikul P, Lawn B R, et al.. A critical evaluation of indentation technique for measuring fracture toughness: Ⅰ. direct crack measurement[J]. Journal of the American Ceramic Society, 1981, 64(9): 533-538.

[19] [19] Li Wu. Inorganic Whiskers[M]. Beijing: Chemical Industry Press, 2005. 1-3.

[20] [20] S Gorsse, D B Miracle. Mechanical properties of Ti-6Al-4V/TiB composites with randomly oriented and aligned TiB reinforcements[J]. Acta Materialia, 2003, 51(9): 2427-2442.

[21] [21] Zhang X N, Lu W J, Zhang D, et al.。 In situ technique for synthesizing (TiB+TiC)/Ti composites[J]. Scripta Materialia, 1999, 44(1): 39-46.