[1] [1] LUO J, LIU X T, WANG H J, et al. Tolerance analysis for automobile transmission shaft based on minimum cost and reliability target［J］. Science Progress, 2020, 103(4): 36850420959177.

[4] [4] ZHAO Z, CHEN J, TAN H, et al. Evolution of plastic deformation and its effect on mechanical properties of laser additive repaired Ti64ELI titanium alloy［J］. Optics & Laser Technology, 2017, 92: 36-43.

[5] [5] LI H C, WANG D G, CHEN C Z, et al. Phase composition, microstructure and in vitro bioactivity of laser cladding CaO-ZrO2-SiO2 system coatings on titanium alloy［J］. Materials Letters, 2015, 157: 139-142.

[6] [6] CHEW Y, PANG J H L, BI G J, et al. Effects of laser cladding on fatigue performance of AISI 4340 steel in the as-clad and machine treated conditions［J］. Journal of Materials Processing Technology, 2017, 243: 246-257.

[7] [7] DUAN X X, GAO S Y, DONG Q, et al. Reinforcement mechanism and wear resistance of Al2O3/Fe-Cr-Mo steel composite coating produced by laser cladding［J］. Surface and Coatings Technology, 2016, 291: 230-238.

[8] [8] JIA W P, JING C, YANG H O, et al. Microstructures and mechanical properties of laser rapid-formed Ti-6Al-4V alloy［C］//Photonics Asia. Proc SPIE 5629, Lasers in Material Processing and Manufacturing Ⅱ, Beijing:s.n. 2005, 5629: 119-128.

[12] [12] SEO J W, KIM J C, KWON S J, et al. Effects of laser cladding for repairing and improving wear of rails［J］. International Journal of Precision Engineering and Manufacturing, 2019, 20(7): 1207-1217.

[13] [13] ZHU S C, CHEN W L, ZHAN X H, et al. Parameteroptimisation of laser cladding repair for an Invar alloy mould［J］. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2019, 233(8): 1859-1871.

[14] [14] ZHANG N, LIU WW, DENG D W, et al. Effect of electric-magnetic compound field on the pore distribution in laser cladding process［J］. Optics & Laser Technology, 2018, 108: 247-254.

[15] [15] LI Y, CUI X F, JIN G, et al. Influence of magnetic field on microstructure and properties of TiC/cobalt-based composite plasma cladding coating［J］. Surface and Coatings Technology, 2017, 325: 555-564.

[17] [17] ZHAN X H, QI C Q, GAO Z N, et al. The influence of heat input on microstructure and porosity during laser cladding of Invar alloy［J］. Optics & Laser Technology, 2019, 113: 453-461.

[18] [18] CHEN X, QIU C L.In-situ development of a sandwich microstructure with enhanced ductility by laser reheating of a laser melted titanium alloy［J］. Scientific Reports, 2020, 10: 15870.

[20] [20] TEMMLER A, PIRCH N, LUO J, et al. Numerical and experimental investigation on formation of surface structures in laser remelting for additive-manufactured Inconel 718［J］. Surface and Coatings Technology, 2020, 403: 126370.

[21] [21] LEE S, AHMADI Z, PEGUES J W, et al. Laser polishing for improving fatigue performance of additive manufactured Ti-6Al-4V parts［J］. Optics & Laser Technology, 2021, 134: 106639.

[22] [22] SUN G F, ZHOU R, LU J Z, et al. Evaluation of defect density, microstructure, residual stress, elastic modulus, hardness and strength of laser-deposited AISI 4340 steel［J］.Acta Materialia, 2015, 84: 172-189.

[23] [23] DAS B, NATH A K, BANDYOPADHYAY P P. Online monitoring of laser remelting of plasma sprayed coatings to study the effect of cooling rate on residual stress and mechanical properties［J］. Ceramics International, 2018, 44(7): 7524-7534.