[1] Xu B S, Li E Z, Zheng H D et al. The remanufacturing industry and its development strategy in China[J]. Engineering Science, 19, 61-65(2017).

[2] Wei S G, Cheng D B, Sundin E et al. Motives and barriers of the remanufacturing industry in China[J]. Journal of Cleaner Production, 94, 340-351(2015). http://www.sciencedirect.com/science/article/pii/S0959652615001183

[3] Feng H, Li J F, Sun J. Study on remanufacturing repair of damaged crank shaft journal surface by laser cladding[J]. Chinese Journal of Lasers, 41, 0803003(2014).

[4] Tseng W C, Aoh J N. Simulation study on laser cladding on preplaced powder layer with a tailored laser heat source[J]. Optics & Laser Technology, 48, 141-152(2013). http://www.sciencedirect.com/science/article/pii/S0030399212004227

[5] Li J Z, Li X F, Zuo D W et al. Process test and temperature field simulation of the Al/Ti laser cladding coating above 7050 aluminum alloy[J]. Laser & Optoelectronics Progress, 51, 121403(2014). http://www.en.cnki.com.cn/Article_en/CJFDTotal-JGDJ201412022.htm

[6] Torres Cruz A, de Lange D F, Medellín-Castillo H I. Comparative study of numerical models of the laser forming process[J]. Journal of Laser Applications, 27, S29105(2015). http://scitation.aip.org/content/lia/journal/jla/27/s2/10.2351/1.4907397

[7] Boutalbi N, Bouaziz M N, Allouche M. Influence of temperature-dependent absorptivity on solid surface heated by CO2 and Nd∶YAG lasers[J]. Journal of Laser Applications, 28, 032004(2016). http://scitation.aip.org/content/lia/journal/jla/28/3/10.2351/1.4947311

[8] Farahmand P, Kovacevic R. An experimental-numerical investigation of heat distribution and stress field in single- and multi-track laser cladding by a high-power direct diode laser[J]. Optics & Laser Technology, 63, 154-168(2014). http://www.sciencedirect.com/science/article/pii/S0030399214001066

[9] Mirzade F K, Niziev V G, Panchenko V Y et al. Kinetic approach in numerical modeling of melting and crystallization at laser cladding with powder injection[J]. Physica B: Condensed Matter, 423, 69-76(2013). http://www.sciencedirect.com/science/article/pii/S0921452613002809

[10] Li H, Wang Y F, Shi Z Q et al. Simulation of laser cladding temperature field and flow field based on ellipse heat source model[J]. Applied Laser, 37, 218-222(2017).

[11] Liu H, Yu G, He X L et al. Three-dimensional numerical simulation of transient temperature field and coating geometry in powder feeding laser cladding[J]. Chinese Journal of Lasers, 40, 1203007(2013).

[12] Song J L, Li Y T, Deng Q L et al. Research progress of laser cladding forming technology[J]. Journal of Mechanical Engineering, 46, 29-39(2010).

[13] Hua L, Tian W, Liao W H et al. Fatigue life evaluation for laser cladding component based on non-linear continuum fatigue damage model[J]. Chinese Journal of Lasers, 42, 0903006(2015).

[14] Li M Y, Cai C B, Han B et al. Numerical simulation of preheating on temperature and stress fields by laser cladding Ni-based ceramic coating[J]. Transactions of Materials and Heat Treatment, 36, 197-203(2015).

[15] Liu Q C, Janardhana M, Hinton B et al. Laser cladding as a potential repair technology for damaged aircraft components[J]. International Journal of Structural Integrity, 2, 314-331(2011). http://www.emeraldinsight.com/doi/full/10.1108/17579861111162914

[16] Fang J X, Dong S Y, Xu B S et al. Study of stresses of laser metal deposition using FEM considering phase transformation effects[J]. Chinese Journal of Lasers, 42, 0503009(2015).

[17] Dai D P, Jiang X H, Cai J P et al. Numerical simulation of temperature field and stress distribution in Inconel718 Ni base alloy induced by laser cladding[J]. Chinese Journal of Lasers, 42, 0903005(2015).

[18] China Aeronautical Materials Handbook Editorial Committee, [M]. China aeronautical materials handbook, 510-526(2002).

[19] Cao Y L. Research of microstructure and properties of laser cladding Co/RE on 316L stainless steel[D]. Jilin: Jilin University, 37-47(2015).

[20] Gong X Y, Gao S Y, Xian S Y et al[J]. Warp deformation in single-track laser cladding based on temperature characteristics Laser & Optoelectronics Progress, 2017, 101410.

[21] Li M Y, Han B, Cai C B et al. 36(5): 25-28[J]. stress fields of laser cladded Ni-based coating. Transactions of the China Welding Institution, 32, 114(2015).

[22] Liu Y C, Fan C F, Yin X L et al. Temperature and stress analysis of dual-beam laser cladding on gray cast iron surface[J]. Applied Laser, 34, 288-293(2014).

[23] Wang K, Zhao J F, Pan H et al. Influence of repair cross section on stress-field distribution in the nickel-based superalloy laser remanufacturing[J]. Laser & Optoelectronics Progress, 50, 041402(2013).

[24] Wu J. An analysis of performance optimization criteria for a coupled radiative-convective heat transfer process[J]. Journal of Engineering Thermophysics, 34, 1922-1925(2013).

[25] Li S, Cai X, Zhu L F et al. Numerical simulation of wet submersible pump based on the single passage and structured grid[J]. Journal of East China University of Science and Technology (Natural Science Edition), 42, 580-586(2016).

[26] Pan H, Zhao J F, Liu Y L et al. Controllability research on dilution ratio of nickel-based superalloy by laser cladding reparation[J]. Chinese Journal of Lasers, 40, 0403007(2013).

[27] Kardas O O, Keles O, Akhtar S et al. Laser cutting of rectangular geometry in 2024 aluminum alloy: thermal stress analysis[J]. Optics & Laser Technology, 64, 247-256(2014). http://www.sciencedirect.com/science/article/pii/s0030399214001558