[1] Zhao W W, Lin X, Liu F C et al. Effect of heat treatment on microstructure and mechanical properties of laser solid forming Inconel 718 superalloy[J]. Chinese Journal of Lasers, 36, 3220-3225(2009).

[2] Wei X P, Zheng W J, Song Z G et al. Effects of heat treatment on microstructure and mechanical properties of Inconel 718 alloy[J]. Transactions of Materials and Heat Treatment, 33, 53-58(2012).

[3] Niu J, Zhang F Y, Yang S L et al[J]. Effects of aging treatments on the microstructure and mechanical properties of GH4169 alloy Aeronautical Manufacturing Technology, 2016, 45-48.

[4] Zhang Q L, Yao J H, Mazumder J. Laser direct metal deposition technology and microstructure and composition segregation of Inconel 718 superalloy[J]. Journal of Iron and Steel Research International, 18, 73-78(2011).

[5] Zhang Y C, Li Z G, Nie P L et al. Effect of ultrarapid cooling on microstructure of laser cladding IN718 coating[J]. Surface Engineering, 29, 414-418(2013).

[6] Feng X T, Gu H, Zhou S F et al. Microstructure and electrochemical corrosion behavior of TC4 titanium alloy cladding layer prepared with powder feeding laser additive manufacturing[J]. Chinese Journal of Lasers, 46, 0302003(2019).

[7] Wei J, Li Y L, He Y L et al. Influence of Hastelloy-X powder composition on anisotropic forming performance of selective laser melting[J]. Chinese Journal of Lasers, 45, 1202011(2018).

[8] Yu Q, Wang C S. Laser additive manufacturing of Ni45 alloys assisted by electromagnetic stirring[J]. Chinese Journal of Lasers, 45, 0402003(2018).

[9] Zhao J F, Cheng C, Xie D Q et al. High-temperature tensile property of GH4169 nickel-based superalloys by laser repair[J]. Chinese Journal of Lasers, 43, 0802012(2016).

[10] Bian H Y, Zhao X P, Qu S et al. Effect of heat treatment on high temperature tensile properties of laser deposition repair GH4169 superalloy[J]. Chinese Journal of Lasers, 43, 0103008(2016).

[11] Bian H Y, Zhao X P, Yang G et al. Microstructure and properties of heat treatment GH4169 alloy by laser deposition repair[J]. Chinese Journal of Lasers, 42, 1206001(2015).

[12] Liu F C, Lü F Y, Ren H et al. δ phase precipitation of Inconel 718 Ni-based superalloy fabricated by laser solid forming[J]. Chinese Journal of Lasers, 45, 1202009(2018).

[13] Sui S, Chen J, Ma L et al. Microstructures and stress rupture properties of pulse laser repaired Inconel 718 superalloy after different heat treatments[J]. Journal of Alloys and Compounds, 770, 125-135(2019).

[14] Zhang J, Zhang Q L, Chen Z J et al. Effects of solution temperature on microstructure and properties of Inconel 718 alloy fabricated via laser additive manufacturing[J]. Surface Technology, 48, 47-53(2019).

[15] Shen J L. Study on the characteristics of δ phase precipitation and its effect on welding seam fracture in GH4169 alloy[D]. Guiyang: Guizhou University, 22-33(2018).

[16] Zhang Q L, Li D, Zhang J et al. Influence of pre-fabricated groove angle on microstructure and properties of laser additive remanufactured IN718 alloy[J]. Surface Technology, 48, 90-96(2019).

[17] Di X J, Xing X X, Wang B S. Nucleation and coarsening mechanism of δ phase in Inconel 625 deposited metal[J]. Acta Metallurgica Sinica, 50, 323-328(2014).

[18] Zhang J L. Effect of δ-phase on the microstructural evolution and properties of GH4169 alloy[D]. Tianjin: Tianjin University, 23-32(2017).

[19] Li Y M, Zhu R M, Liu H J et al. Effect of long-time aging on precipitated phase and tensile properties of GH625 alloy[J]. The Chinese Journal of Nonferrous Metals, 29, 262-269(2019).