[1] [1] WANG X M. New concept structure design and engineering application of aircraft［J］. Aeronautical Science & Technology, 2020, 31(4): 1-7.

[2] [2] WANG W L. NC machining technology of large integral titanium alloy frame［J］. Aeronautical Manufacturing Technology, 2010, 53(24): 65-67.

[3] [3] WANG H M. Materials′ fundamental issues of laser additive manufacturing for high-performance large metallic components［J］. Acta Aeronautica et Astronautica Sinica, 2014, 35(10): 2690-2698.

[4] [4] WILSON J M, PIYA C, SHIN Y C, et al. Remanufacturing of turbine blades by laser direct deposition with its energy and environmental impact analysis［J］. Journal of Cleaner Production, 2014, 80: 170-178.

[5] [5] QIU C L, RAVI G A, DANCE C, et al. Fabrication of large Ti6Al4V structures by direct laser deposition［J］. Journal of Alloys and Compounds, 2015, 629: 351-361.

[6] [6] WANG T, ZHU Y Y, ZHANG S Q, et al. Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing［J］. Journal of Alloys and Compounds, 2015, 632: 505-513.

[7] [7] REN Y H, LIU J P, YANG G, et al. Fatigue crack growth behavior of laser deposited TA15 titanium alloy［J］. Applied Laser, 2020, 40(2): 199-204.

[8] [8] HUANG T, SONG L J, LI S M. Study on temperature control of molten pool for laser direct metal deposition［J］. Applied Laser, 2019, 39(6): 949-955.

[9] [9] WANG X M, SU Y D, WU B. Application of additive manufacturing technology on aircraft structure development［J］. Aeronautical Manufacturing Technology, 2014, 57(22): 16-20.

[10] [10] WANG X, WANG W, YANG G, et al. Dimensional effect on thermo-mechanical evolution of laser depositing thin-walled structure［J］. Acta Metallurgica Sinica, 2020, 56(5): 745-752.

[11] [11] SUN H J, WEI J, ZHENG Z H, et al. Effects of laser process parameters on residual stress of pure titanium samples prepared by laser melting deposition［J］. Chinese Journal of Lasers, 2019, 46(3): 0302014.

[12] [12] THAWARI N, GULLIPALLI C, CHANDAK A, et al. Influence of laser cladding parameters on distortion, thermal history and melt pool behaviour in multi-layer deposition of stellite 6: In situ measurement［J］. Journal of Alloys and Compounds, 2021, 860: 157894.

[13] [13] LU X F, LIN X, CHIUMENTI M, et al. Finite element analysis and experimental validation of the thermomechanical behavior in laser solid forming of Ti6Al4V［J］. Additive Manufacturing, 2018, 21: 30-40.

[14] [14] LU X F, LIN X, CHIUMENTI M, et al. In situ measurements and thermo-mechanical simulation of Ti6Al4V laser solid forming processes［J］. International Journal of Mechanical Sciences, 2019, 153/154: 119-130.

[15] [15] LU X F, LIN X, CHIUMENTI M, et al. Residual stress and distortion of rectangular and S-shaped Ti6Al4V parts by Directed Energy Deposition: Modelling and experimental calibration［J］. Additive Manufacturing, 2019, 26: 166-179.

[16] [16] LU X F, LIN X, MA L, et al. Effect of scanning path on thermo-mechanical field of laser solid forming TC4 part［J］. Journal of Materials Engineering, 2019, 47(12): 55-62.

[17] [17] HEIGEL J C, MICHALERIS P, REUTZEL E W. Thermo-mechanical model development and validation of directed energy deposition additive manufacturing of Ti6Al4V［J］. Additive Manufacturing, 2015, 5: 9-19.

[18] [18] MUKHERJEE T, ZHANG W,DEBROY T. An improved prediction of residual stresses and distortion in additive manufacturing［J］. Computational Materials Science, 2017, 126: 360-372.

[19] [19] FALLAH V, ALIMARDANI M, CORBIN S F, et al. Temporal development of melt-pool morphology and clad geometry in laser powder deposition［J］. Computational Materials Science, 2011, 50(7): 2124-2134.

[20] [20] PARRY L, ASHCROFT I A,WILDMAN R D. Understanding the effect of laser scan strategy on residual stress in selective laser melting through thermo-mechanical simulation［J］. Additive Manufacturing, 2016, 12: 1-15.