[1] [1] DAVIDOVITS J. Chemistry of geopolymeric systems, terminology［C］//Proceedings of 2nd International Conference on Geopolymer 99, Saint Quentin, 1999: 9-37.

[2] [2] PROVIS J L, BERNAL S A. Geopolymers and related alkali-activated materials[J]. Annual Review of Materials Research, 2014, 44: 299-327.

[3] [3] DAVIDOVITS J. Geopolymers[J]. Journal of Thermal Analysis, 1991, 37(8): 1633-1656.

[4] [4] YIN B, KANG T H, KANG J T, et al. Analysis of active ion-leaching behavior and the reaction mechanism during alkali activation of low-calcium fly ash[J]. International Journal of Concrete Structures and Materials, 2018, 12(1): 50.

[5] [5] PROVIS J L, VAN DEVENTER J S J. Geopolymerisation kinetics： reaction kinetic modelling[J]. Chemical Engineering Science, 2007, 62(9): 2318-2329.

[6] [6] YAO X, ZHANG Z H, ZHU H J, et al. Geopolymerization process of alkali-metakaolinite characterized by isothermal calorimetry[J]. Thermochimica Acta, 2009, 493(1/2): 49-54.

[7] [7] LI C, SUN H H, LI L T. A review: the comparison between alkali-activated slag (Si+Ca) and metakaolin (Si+Al) cements[J]. Cement and Concrete Research, 2010, 40(9): 1341-1349.

[8] [8] ZHANG Z. The effects of physical and chemical properties of fly ash on the manufacture of geopolymer foam concretes［D］. Toowoomba: University of Southern Queensland, 2014.

[13] [13] FERNNDEZ-JIMNEZ A, PALOMO A, SOBRADOS I, et al. The role played by the reactive alumina content in the alkaline activation of fly ashes[J]. Microporous and Mesoporous Materials, 2006, 91(1/2/3): 111-119.

[14] [14] SAGOE-CRENTSIL K, WENG L. Dissolution processes, hydrolysis and condensation reactions during geopolymer synthesis: part II. high Si/Al ratio systems[J]. Journal of Materials Science, 2007, 42(9): 3007-3014.

[15] [15] STEVESON M, SAGOE-CRENTSIL K. Relationships between composition, structure and strength of inorganic polymers[J]. Journal of Materials Science, 2005, 40(8): 2023-2036.

[16] [16] WHITE C E, PROVIS J L, PROFFEN T, et al. Molecular mechanisms responsible for the structural changes occurring during geopolymerization: multiscale simulation[J]. AIChE Journal, 2012, 58(7): 2241-2253.

[17] [17] CHEN X, SUTRISNO A, STRUBLE L J. Effects of calcium on setting mechanism of metakaolin-based geopolymer[J]. Journal of the American Ceramic Society, 2018, 101(2): 957-968.

[18] [18] KENNE DIFFO B B, ELIMBI A, CYR M, et al. Effect of the rate of calcination of kaolin on the properties of metakaolin-based geopolymers[J]. Journal of Asian Ceramic Societies, 2015, 3(1): 130-138.

[19] [19] CHEN X, SUTRISNO A, ZHU L Y, et al. Setting and nanostructural evolution of metakaolin geopolymer[J]. Journal of the American Ceramic Society, 2017, 100(5): 2285-2295.

[20] [20] MO B H, ZHU H, CUI X M, et al. Effect of curing temperature on geopolymerization of metakaolin-based geopolymers[J]. Applied Clay Science, 2014, 99: 144-148.

[21] [21] CHENG T W, CHIU J P. Fire-resistant geopolymer produced by granulated blast furnace slag[J]. Minerals Engineering, 2003, 16(3): 205-210.

[23] [23] KAYA K, SOYER-UZUN S. Evolution of structural characteristics and compressive strength in red mud-metakaolin based geopolymer systems[J]. Ceramics International, 2016, 42(6): 7406-7413.

[24] [24] LIU J P, LI X Y, LU Y S, et al. Effects of Na/Al ratio on mechanical properties and microstructure of red mud-coal metakaolin geopolymer[J]. Construction and Building Materials, 2020, 263: 120653.

[25] [25] HE J, ZHANG J H, YU Y Z, et al. The strength and microstructure of two geopolymers derived from metakaolin and red mud-fly ash admixture: a comparative study[J]. Construction and Building Materials, 2012, 30: 80-91.

[26] [26] SINGH S, ASWATH M U, RANGANATH R V. Effect of mechanical activation of red mud on the strength of geopolymer binder[J]. Construction and Building Materials, 2018, 177: 91-101.

[27] [27] KUMAR A, KUMAR S. Development of paving blocks from synergistic use of red mud and fly ash using geopolymerization[J]. Construction and Building Materials, 2013, 38: 865-871.

[28] [28] BAYAT A, HASSANI A, YOUSEFI A A. Effects of red mud on the properties of fresh and hardened alkali-activated slag paste and mortar[J]. Construction and Building Materials, 2018, 167: 775-790.

[29] [29] DUXSON P, MALLICOAT S W, LUKEY G C, et al. The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymers[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2007, 292(1): 8-20.

[30] [30] ZHAO Y B, YANG C Q, LI K F, et al. Toward understanding the activation and hydration mechanisms of composite activated coal gangue geopolymer[J]. Construction and Building Materials, 2022, 318: 125999.

[31] [31] CHENG Y, MA H Q, CHEN H Y, et al. Preparation and characterization of coal gangue geopolymers[J]. Construction and Building Materials, 2018, 187: 318-326.

[32] [32] GENG J J, ZHOU M, ZHANG T, et al. Preparation of blended geopolymer from red mud and coal gangue with mechanical co-grinding preactivation[J]. Materials and Structures, 2016, 50(2): 109.

[33] [33] TEMUUJIN J, VAN RIESSEN A. Effect of fly ash preliminary calcination on the properties of geopolymer[J]. Journal of Hazardous Materials, 2009, 164(2/3): 634-639.

[34] [34] TEMUUJIN J, VAN RIESSEN A, WILLIAMS R. Influence of calcium compounds on the mechanical properties of fly ash geopolymer pastes[J]. Journal of Hazardous Materials, 2009, 167(1/2/3): 82-88.

[35] [35] PULIGILLA S, CHEN X, MONDAL P. Does synthesized C-S-H seed promote nucleation in alkali activated fly ash-slag geopolymer binder?[J]. Materials and Structures, 2019, 52(4): 65.

[36] [36] LEE W K W, VAN DEVENTER J S J. The effect of ionic contaminants on the early-age properties of alkali-activated fly ash-based cements[J]. Cement and Concrete Research, 2002, 32(4): 577-584.

[37] [37] WATTIMENA O K, ANTONI, HARDJITO D. A review on the effect of fly ash characteristics and their variations on the synthesis of fly ash based geopolymer［C］//AIP Conference Proceedings. East Java, Indonesia, 2017.

[38] [38] FERNNDEZ-JIMNEZ A, PALOMO A, CRIADO M. Microstructure development of alkali-activated fly ash cement: a descriptive model[J]. Cement and Concrete Research, 2005, 35(6): 1204-1209.

[39] [39] ZHANG Z H, PROVIS J L, ZOU J, et al. Toward an indexing approach to evaluate fly ashes for geopolymer manufacture[J]. Cement and Concrete Research, 2016, 85: 163-173.

[40] [40] WIJAYA S W, HARDJITO D. Factors affecting the setting time of fly ash-based geopolymer[J]. Materials Science Forum, 2016, 841: 90-97.

[41] [41] LI Z P, XU G, SHI X M. Reactivity of coal fly ash used in cementitious binder systems: a state-of-the-art overview[J]. Fuel, 2021, 301: 121031.

[43] [43] XU X Q, BAO S X, ZHANG Y M, et al. Role of particle fineness and reactive silicon-aluminum ratio in mechanical properties and microstructure of geopolymers[J]. Construction and Building Materials, 2021, 313: 125483.

[44] [44] MUSADDIQ LASKAR S, TALUKDAR S. Development of ultrafine slag-based geopolymer mortar for use as repairing mortar[J]. Journal of Materials in Civil Engineering, 2017, 29(5): 04016292.

[45] [45] TALLING B, BRANDSTETR J. Present state and future of alkali-activated slag concretes［C］//Fly Ash, silica fume, slag, and natural pozzolans in concrete: proceedings of the third international conference. American Concrete Institute, 1989: 1591-1546.

[46] [46] BEN HAHA M, LOTHENBACH B, LE SAOUT G, et al. Influence of slag chemistry on the hydration of alkali-activated blast-furnace slag: part I: effect of MgO[J]. Cement and Concrete Research, 2011, 41(9): 955-963.

[48] [48] ALEX T C, MUCSI G, VENUGOPALAN T, et al. BOF steel slag: critical assessment and integrated approach for utilization[J]. Journal of Sustainable Metallurgy, 2021, 7(4): 1407-1424.

[49] [49] SHI C J, QIAN J S. High performance cementing materials from industrial slags: a review[J]. Resources, Conservation and Recycling, 2000, 29(3): 195-207.

[50] [50] IONESCU B A, LZRESCU A V, HEGYI A. The possibility of using slag for the production of geopolymer materials and its influence on mechanical performances: a review[J]. Proceedings, 2020, 63(1): 30.

[51] [51] JIANG Y, LING T C, SHI C J, et al. Characteristics of steel slags and their use in cement and concrete: a review[J]. Resources, Conservation and Recycling, 2018, 136: 187-197.

[52] [52] GUO X L, SHI H S. Utilization of steel slag powder as a combined admixture with ground granulated blast-furnace slag in cement based materials[J]. Journal of Materials in Civil Engineering, 2013, 25(12): 1990-1993.

[53] [53] MIAH M J, PATOARY M M H, PAUL S C, et al. Enhancement of mechanical properties and porosity of concrete using steel slag coarse aggregate[J]. Materials, 2020, 13(12): 2865.

[54] [54] SAXENA S, TEMBHURKAR A R. Impact of use of steel slag as coarse aggregate and wastewater on fresh and hardened properties of concrete[J]. Construction and Building Materials, 2018, 165: 126-137.

[55] [55] BAI T, SONG Z G, WU Y G, et al. Influence of steel slag on the mechanical properties and curing time of metakaolin geopolymer[J]. Ceramics International, 2018, 44(13): 15706-15713.

[56] [56] SONG W, ZHU Z, PU S, et al. Efficient use of steel slag in alkali-activated fly ash-steel slag-ground granulated blast furnace slag ternary blends[J]. Construction and Building Materials, 2020, 259: 119814.

[57] [57] WANG Y H, XIAO R, HU W, et al. Effect of granulated phosphorus slag on physical, mechanical and microstructural characteristics of class F fly ash based geopolymer[J]. Construction and Building Materials, 2021, 291: 123287.

[58] [58] GONG C M, YANG N R. Effect of phosphate on the hydration of alkali-activated red mud-slag cementitius material[J]. Cement and Concrete Research, 2000, 30(7): 1013-1016.

[60] [60] PERN I, HANZLEK T. The setting time of a clay-slag geopolymer matrix: the influence of blast-furnace-slag addition and the mixing method[J]. Journal of Cleaner Production, 2016, 112: 1150-1155.

[62] [62] KUMAR S, KUMAR R, MEHROTRA S P. Influence of granulated blast furnace slag on the reaction, structure and properties of fly ash based geopolymer[J]. Journal of Materials Science, 2010, 45(3): 607-615.

[63] [63] TOPARK-NGARM P, CHINDAPRASIRT P, SATA V. Setting time, strength, and bond of high-calcium fly ash geopolymer concrete[J]. Journal of Materials in Civil Engineering, 2015, 27(7): 04014198.

[64] [64] CHINDAPRASIRT P, CHAREERAT T, HATANAKA S, et al. High-strength geopolymer using fine high-calcium fly ash[J]. Journal of Materials in Civil Engineering, 2011, 23(3): 264-270.

[65] [65] ZHANG Y J, ZHAO Y L, LI H H, et al. Structure characterization of hydration products generated by alkaline activation of granulated blast furnace slag[J]. Journal of Materials Science, 2008, 43(22): 7141-7147.

[67] [67] ISHWARYA G, SINGH B, DESHWAL S, et al. Effect of sodium carbonate/sodium silicate activator on the rheology, geopolymerization and strength of fly ash/slag geopolymer pastes[J]. Cement and Concrete Composites, 2019, 97: 226-238.

[69] [69] SONG W L, ZHU Z D, PENG Y Y, et al. Effect of steel slag on fresh, hardened and microstructural properties of high-calcium fly ash based geopolymers at standard curing condition[J]. Construction and Building Materials, 2019, 229: 116933.

[71] [71] RAHIER H, WASTIELS J, BIESEMANS M, et al. Reaction mechanism, kinetics and high temperature transformations of geopolymers[J]. Journal of Materials Science, 2007, 42(9): 2982-2996.

[72] [72] MALKAWI A B, NURUDDIN M F, FAUZI A, et al. Effects of alkaline solution on properties of the HCFA geopolymer mortars[J]. Procedia Engineering, 2016, 148: 710-717.

[73] [73] YUAN J K, LI L Z, HE P G, et al. Effects of kinds of alkali-activated ions on geopolymerization process of geopolymer cement pastes[J]. Construction and Building Materials, 2021, 293: 123536.

[74] [74] DUXSON P, LUKEY G C, SEPAROVIC F, et al. Effect of alkali cations on aluminum incorporation in geopolymeric gels[J]. Industrial & Engineering Chemistry Research, 2005, 44(4): 832-839.

[75] [75] XU H, VAN DEVENTER J S J. The geopolymerisation of alumino-silicate minerals[J]. International Journal of Mineral Processing, 2000, 59(3): 247-266.

[76] [76] HE J, JIE Y X, ZHANG J H, et al. Synthesis and characterization of red mud and rice husk ash-based geopolymer composites[J]. Cement and Concrete Composites, 2013, 37: 108-118.

[77] [77] NANA A, NGOUN J, KAZE R C, et al. Room-temperature alkaline activation of feldspathic solid solutions: development of high strength geopolymers[J]. Construction and Building Materials, 2019, 195: 258-268.

[78] [78] LING Y F, WANG K J, WANG X H, et al. Effects of mix design parameters on heat of geopolymerization, set time, and compressive strength of high calcium fly ash geopolymer[J]. Construction and Building Materials, 2019, 228: 116763.

[79] [79] PARK S, POUR-GHAZ M. What is the role of water in the geopolymerization of metakaolin?[J]. Construction and Building Materials, 2018, 182: 360-370.

[80] [80] ZHANG Z H, XIAO Y, ZHU H J, et al. Role of water in the synthesis of calcined kaolin-based geopolymer[J]. Applied Clay Science, 2009, 43(2): 218-223.

[81] [81] LIEW Y M, KAMARUDIN H, MUSTAFA AL BAKRI A M, et al. Calcined kaolin geopolymeric powder: influence of water-to-geopolymeric powder ratio[J]. Advanced Materials Research, 2012, 548: 48-53.

[82] [82] RANGAN B V. Fly ash-based geopolymer concrete［D］. Perth: Curtin University of Technology, 2008.

[84] [84] SLEIMAN H, PERROT A, AMZIANE S. A new look at the measurement of cementitious paste setting by Vicat test[J]. Cement and Concrete Research, 2010, 40(5): 681-686.

[85] [85] WU M M, SHEN W G, XIONG X, et al. Effects of the phosphogypsum on the hydration and microstructure of alkali activated slag pastes [J]. Construction and Building Materials, 2023, 368: 130391.

[86] [86] BERNAL S A, PROVIS J L, FERNNDEZ-JIMNEZ A, et al. Binder chemistry-high-calcium alkali-activated materials［M］. Dordrecht: Springer Netherlands, 2013: 59-91.

[87] [87] WANG J W, CHENG T W. Production geopolymer materials by coal fly ash［C］//Proceedings of the 7th International Symposium on East Asian Resources Recycling Technology, 2003: 263-266.

[88] [88] ROVNANK P. Effect of curing temperature on the development of hard structure of metakaolin-based geopolymer[J]. Construction and Building Materials, 2010, 24(7): 1176-1183.

[89] [89] BURCIAGA-DAZ O, GMEZ-ZAMORANO L Y, ESCALANTE-GARCA J I. Influence of the long term curing temperature on the hydration of alkaline binders of blast furnace slag-metakaolin[J]. Construction and Building Materials, 2016, 113: 917-926.

[90] [90] PULIGILLA S, MONDAL P. Role of slag in microstructural development and hardening of fly ash-slag geopolymer[J]. Cement and Concrete Research, 2013, 43: 70-80.

[91] [91] KUENZEL C, RANJBAR N. Dissolution mechanism of fly ash to quantify the reactive aluminosilicates in geopolymerisation[J]. Resources, Conservation and Recycling, 2019, 150: 104421.

[92] [92] RANJBAR N, KUENZEL C. Cenospheres: a review[J]. Fuel, 2017, 207: 1-12.

[93] [93] ZHANG Z H, YAO X, ZHU H J, et al. Activating process of geopolymer source material: kaolinite[J]. Journal of Wuhan University of Technology-Mater Sci Ed, 2009, 24(1): 132-136.

[94] [94] LANCELLOTTI I, CATAURO M, PONZONI C, et al. Inorganic polymers from alkali activation of metakaolin: effect of setting and curing on structure[J]. Journal of Solid State Chemistry, 2013, 200: 341-348.

[95] [95] ZHANG Z H, YAO X, ZHU H J. Potential application of geopolymers as protection coatings for marine concrete II. microstructure and anticorrosion mechanism[J]. Applied Clay Science, 2010, 49(1/2): 7-12.

[96] [96] RANJBAR N, KASHEFI A, MAHERI M R. Hot-pressed geopolymer: dual effects of heat and curing time[J]. Cement and Concrete Composites, 2018, 86: 1-8.

[97] [97] DO Q M, NGO P M, NGUYEN H T. Characteristics of a fly ash-based geopolymer cured in microwave oven[J]. Key Engineering Materials, 2020, 850: 63-69.

[99] [99] RATTANASAK U, PANKHET K, CHINDAPRASIRT P. Effect of chemical admixtures on properties of high-calcium fly ash geopolymer[J]. International Journal of Minerals, Metallurgy, and Materials, 2011, 18(3): 364-369.

[100] [100] LEA F M, HEWLETT P C A L. Lea’s chemistry of cement and concrete［M］. Array Kidlington, Oxford: Butterworth-Heinemann, 2019.

[101] [101] TAYLOR H F W. Cement chemistry［M］. 2nd ed. London: Thomas Telford, 1997.

[102] [102] WANG L, GEDDES D A, WALKLEY B, et al. The role of zinc in metakaolin-based geopolymers[J]. Cement and Concrete Research, 2020, 136: 106194.

[103] [103] CONG X Y, ZHOU W, GENG X R, et al. Low field NMR relaxation as a probe to study the effect of activators and retarders on the alkali-activated GGBFS setting process[J]. Cement and Concrete Composites, 2019, 104: 103399.

[104] [104] ZHANG L L, JI Y S, LI J, et al. Effect of retarders on the early hydration and mechanical properties of reactivated cementitious material[J]. Construction and Building Materials, 2019, 212: 192-201.

[105] [105] DU W F, KURAOKA K, AKAI T, et al. Study of Al2O3 effect on structural change and phase separation in Na2O-B2O3-SiO2 glass by NMR[J]. Journal of Materials Science, 2000, 35(19): 4865-4871.

[106] [106] SASAKI K, KURUMISAWA K, IBAYASHI K. Effect of retarders on flow and strength development of alkali-activated fly ash/blast furnace slag composite[J]. Construction and Building Materials, 2019, 216: 337-346.

[107] [107] JAMIL N N B. The Effect of natural retarder on geopolymer concrete with different curing regime［D］. Tronoh: Universiti Teknologi Petronas, 2010.

[108] [108] ASSI L N, DEAVER E, ZIEHL P. Using sucrose for improvement of initial and final setting times of silica fume-based activating solution of fly ash geopolymer concrete[J]. Construction and Building Materials, 2018, 191: 47-55.

[109] [109] PHOO-NGERNKHAM T, CHINDAPRASIRT P, SATA V, et al. The effect of adding nano-SiO2 and nano-Al2O3 on properties of high calcium fly ash geopolymer cured at ambient temperature[J]. Materials & Design, 2014, 55: 58-65.

[110] [110] XIE T Y, FANG C F. Nanomaterials applied in modifications of geopolymer composites: a review[J]. Australian Journal of Civil Engineering, 2019, 17(1): 32-49.