[1] Li J F, Chang J W. The basis, road and policies for China’s industrial low-carbon transformation-commentary and prospect[J]. Journal of Eco-civilization Studies, 56-71(2023).

[2] Ma L W, Yuan Y, Li Z. Mapping the characteristics and sensitivities of China’s low-carbon energy supply in 2050[J]. Journal of Tsinghua University (Science and Technology), 62, 802-809(2022).

[3] Kumar S, Yadav V K, Sharma S K et al. Role of dissimilar Ni-based ERNiCrMo-3 filler on the microstructure, mechanical properties and weld induced residual stresses of the ferritic/martensitic P91 steel welds joint[J]. International Journal of Pressure Vessels and Piping, 193, 104443(2021).

[4] Ma Z W, Shen T L, Zhou T et al. Performance of the new ferritic/martensitic steel SIMP against liquid lead-bismuth eutectic corrosion: comparison with T91 and 316L steels[J]. Materials and Corrosion, 74, 221-232(2023).

[5] Li M, Deng S H, Liu C H et al. Study on microstructure of T91/TP347H dissimilar steel welded joints in service[J]. Nonferrous Metals Engineering, 12, 9-15(2022).

[6] Dak G, Pandey C. Experimental investigation on microstructure, mechanical properties, and residual stresses of dissimilar welded joint of martensitic P92 and AISI 304L austenitic stainless steel[J]. International Journal of Pressure Vessels and Piping, 194, 104536(2021).

[7] Yang Y K, Kou S. Macrosegregation mechanisms in arc welds made with dissimilar filler metals[J]. Science and Technology of Welding and Joining, 15, 15-30(2010).

[8] Chen X, Cai W H, Zhang K et al. Overview of early failure of dissimilar steels joint in power plants[J]. Welding & Joining, 2018, 62-63.

[9] Feng J C. Research progress on dissimilar materials joining[J]. Acta Aeronautica et Astronautica Sinica, 43, 626413(2022).

[10] Zheng S X, Zeng D P, Meng Q et al. Formation mechanism analysis of the type-II boundary of dissimilar steel joint with the filler metal of ER309[J]. Transactions of the China Welding Institution, 42, 99-100(2021).

[11] Zhang S, Liu T Z, Xu Z H et al. Effects of beam quality on laser welding efficiency and yield of aluminum alloy[J]. Chinese Journal of Lasers, 51, 1202101(2024).

[12] Shi L, Li X, Jiang L et al. Numerical study of keyhole-induced porosity suppression mechanism in laser welding with beam oscillation[J]. Science and Technology of Welding and Joining, 26, 349-355(2021).

[13] Li J Z, Liu Y B, Tao Y J et al. Analysis of vapor plume and keyhole dynamics in laser welding stainless steel with beam oscillation[J]. Infrared Physics and Technology, 113, 103536(2021).

[14] Mi G Y, Jiang Y M, Wang C M et al. Effect of Ti intermediate layer thickness on microstructure and mechanical properties of 7075 aluminum alloy by laser beam swing welding[J]. Chinese Journal of Lasers, 50, 2402102(2023).

[15] Sanati S, Nabavi S F, Esmaili R et al. Laser wobble welding process: a review on metallurgical, mechanical, and geometrical characteristics and defects[J]. Lasers in Manufacturing and Materials Processing, 11, 743-780(2024).

[16] Zeng Z H, Mei L F, Yang D B et al. The effect of scanning trajectory on the morphology and electrical conductivity of laser welding in red copper[J/OL]. Laser & Optoelectronics Progress, 1-13. https:∥www.opticsjournal.net/Articles/L241578/EarlyPosting

[17] Dong J F, Yang F Y, Wu D et al. Spatter suppression mechanism and process optimization of adjustable ring-mode laser welding[J]. Chinese Journal of Lasers, 51, 1202104(2024).

[18] Sanati S, Nabavi S F, Esmaili R et al. A comprehensive review of laser wobble welding processes in metal materials: processing parameters and practical applications[J]. Lasers in Manufacturing and Materials Processing, 11, 492-528(2024).

[19] Xu K X, Lei Z, Huang R S et al. Effects of oscillation parameters on weld formation and porosity of titanium alloy narrow-gap laser wire filling welding[J]. Chinese Journal of Lasers, 48, 0602111(2021).

[20] Fang R C, Zhang J, Zeng J H et al. Narrow gap wobble laser with filling wire for welding of 35 steel and Q355B steel[J]. Chinese Journal of Lasers, 49, 1602014(2022).

[21] Yang K, Liang Y, Yan W et al. Preferential distribution of boron and its effect on microstructure and mechanical properties of(9-12)%Cr martensitic heat resistant steels[J]. Acta Metallurgica Sinica, 56, 53-65(2020).

[22] Guo H, Fan W D, Long J S et al. Influence of surface condition on the high-temperature corrosion of 12Cr1MoVG, T91, and TP347H steels in waste-to-energy boilers[J]. Engineering Failure Analysis, 152, 107497(2023).

[23] Wu Z F, Wu R. Research development of secondary phase particle in dual-phase system[J]. Materials Review, 24, 113-117(2010).

[24] Gui Y, Liang Z Y, Wang S et al. Corrosion behavior of T91 tubing in high temperature supercritical carbon dioxide environment[J]. Corrosion Science, 211, 110857(2023).

[25] Zhang J B, Liu F, Xue F. Effect of heat treatment on delta-ferrite and impact toughness of P91 heat-resistant steel[J]. Materials Reports, 32, 1318-1322(2018).