[1] MA A, YIN Z, WANG J et al. Al-doped NaNi_1/3Mn_1/3Fe_1/3O₂ for high performance of sodium ion batteries[J]. Ionics, 26, 1797(2020).

[2] ZHOU D, ZENG C, XIANG J et al. Review on Mn-based and Fe-based layered cathode materials for sodium-ion batteries[J]. Ionics, 28, 2029(2022).

[3] YAO H R, ZHENG L, XIN S et al. Air-stability of sodium-based layered-oxide cathode materials[J]. Science China-Chemistry, 65, 1076(2022).

[4] LIU Z, ZHOU C, LIU J et al. Phase tuning of P2/O3-type layered oxide cathode for sodium ion batteries via a simple Li/F co-doping route[J]. Chemical Engineering Journal, 431, 134273(2022).

[5] LI M, JAFTA CJ, GENG L et al. Correlation of oxygen anion redox activity to in-plane honeycomb cation ordering in Na_xNi_yMn_1-yO₂ cathodes[J]. Advanced Energy and Sustainability Research, 3, 2200027(2022).

[6] LI J, LI H, HUANG Q et al. Study on the mechanism of the influence of doping on the properties of cathode materials of sodium ion batteries[J]. Progress in Chemistry, 34, 857(2022).

[7] CHANG Y X, YU L, XING X et al. Ion substitution strategy of manganese-based layered oxide cathodes for advanced and low- cost sodium ion batteries[J]. Chemical Record, 6, 202200122(2022).

[8] YIN Y X, WANG P F, YOU Y et al. An O3-type NaNi_0.5Mn_0.5O₂ cathode for sodium-ion batteries with improved rate performance and cycling stability[J]. Journal of Materials Chemistry A, 4, 17660(2016).

[9] TAN L, WU Q, LIU Z et al. Ti-substituted O3-type layered oxide cathode material with high-voltage stability for sodium-ion batteries[J]. Journal of Colloid and Interface Science, 622, 1037(2022).

[10] YUAN D D, WANG Y X, CAO Y L et al. Improved electrochemical performance of Fe-substituted NaNi_0.5Mn_0.5O₂ cathode materials for sodium-ion batteries[J]. ACS Applied Materials Interfaces, 16, 8585(2015).

[11] YUAN X G, GUO Y J, GAN L et al. A universal strategy toward air-stable and high-rate O3 layered oxide cathodes for Na-ion batteries[J]. Advanced Functional Materials, 32, 2111466(2022).

[12] ZHANG Q, WANG Z, LI X et al. Mitigating the voltage fading and air sensitivity of O3-type NaNi_0.4Mn_0.4Cu_0.1Ti_0.1O₂ cathode material via La doping[J]. Chemical Engineering Journal, 43, 133456(2022).

[13] FIELDEN R, OBROVAC M N. Investigation of the NaNi_xMn_1-xO₂ (0≤x≤1) system for Na-ion battery cathode materials[J]. Journal of the Electrochemical Society, 162, 453(2015).

[14] MATHIYALAGAN K, KARUPPIAH K, PONNAIAH A et al. Significant role of magnesium substitution in improved performance of layered O3-Na-Mn-Ni-Mg-O cathode material for developing sodium-ion batteries[J]. International Journal of Energy Research, 46, 10656(2022).

[15] ZHOU C, YANG L, ZHOU C et al. Co-substitution enhances the rate capability and stabilizes the cyclic performance of O3-type cathode NaNi_0.45-xMn_0.25Ti_0.3Co_xO₂ for sodium-ion storage at high voltage[J]. ACS Applied Materials & Interfaces, 11, 7906(2019).

[16] CHENG Z, FAN X Y, YU L et al. A rational biphasic tailoring strategy enabling high-performance layered cathodes for sodium-ion batteries[J]. Angewandte Chemie International Edition, 61, 17728(2022).

[17] WALCZAK K, PLEWA A, GHICA C et al. NaMn_0.2Fe_0.2Co_0.2Ni_0.2Ti_0.2O₂ high-entropy layered oxide experimental and theoretical evidence of high electrochemical performance in sodium batteries[J]. Energy Storage Materials, 47, 10656(2022).

[18] DING Y, DING F, RONG X et al. Mg-doped layered oxide cathode for Na-ion batteries[J]. Chinese Physics B, 31, 068201(2022).

[19] HUANG Q, FENG Y, WANG L et al. Structure modulation strategy for suppressing high voltage P3-O1 phase transition of O3-NaMn_(0.5)Ni_(0.5)O₂ layered cathode[J]. Chemical Engineering Journal, 431, 133454(2022).

[20] WALCZAK K, PLEWA A, GHICA C et al. NaMn_0.2Fe_0.2Co_0.2Ni_0.2Ti_0.2O₂ high-entropy layered oxide: experimental and theoretical evidence of high electrochemical performance in sodium batteries[J]. Energy Storage Materials, 47, 500(2022).

[21] SONG T, CHEN L, GASTOL D et al. High-voltage stabilization of O3-type layered oxide for sodium-ion batteries by simultaneous tin dual modification[J]. Chemistry of Materials, 34, 4153(2022).

[22] TANG W, SANVILLE E, HENKELMAN G. A grid-based Bader analysis algorithm without lattice bias[J]. Journal of Physics Condensed Matter, 21, 084204(2009).

[23] SANVILLE E, KENNY S D, SMITH R et al. Improved grid-based algorithm for Bader charge allocation[J]. Journal of computational chemistry, 28, 899(2007).

[25] XU Z, GUO X, WANG J Z et al. Restraining the octahedron collapse in lithium and manganese rich NCM cathode toward suppressing structure transformation[J]. Advanced Energy Materials, 12, 2201323(2022).

[26] CHEN T R, SHENG T, WU Z G et al. Cu²⁺ dual-doped layer- tunnel hybrid Na_0.6Mn_1-xCu_xO₂ as a cathode of sodium-ion battery with enhanced structure stability, electrochemical property, and air stability[J]. ACS Applied Materials & Interfaces, 12, 10147(2018).

[27] FENG T, LI L, SHI Q et al. Evidence for the influence of polaron delocalization on the electrical transport in LiNi_0.4+xMn_0.4-xCo_0.2O₂[J]. Physical Chemistry Chemical Physics, 22, 2054(2020).

[28] YADAV I, DUTTA S, PANDEY A et al. Evolution of TiO_x-SiO_x nano-composite during annealing of ultrathin titanium oxide films on Si substrate[J]. Ceramics International, 46, 19935(2020).

[29] SUN Z, DENG X, CHOI J J et al. Silicon surface passivation by laser processing a Sol-Gel TiO_x thin film[J]. ACS Applied Energy Materials, 1, 5474(2018).

[30] YU L, XING X X, ZHANG S Y et al. Cation-disordered O3-Na_0.8Ni_0.6Sb_0.4O₂ cathode for high-voltage sodium-ion batteries[J]. ACS Applied Materials & Interfaces, 13, 32948(2021).

[31] KOUTHAMAN M, KANNAN K, ARJUNAN P et al. Layered O3-type Na_9/10Cr_1/2Fe_1/2O₂ as new cathode for rechargeable sodium-ion battery[J]. Colloids and Surfaces A: Physicochemiacl and Engineering Aspects, 633, 127929(2022).

[32] RYU H H, HAN G, YU T Y et al. Enhanced cycling stability of O3-type Na[Ni_0.5Mn_0.5]O₂ cathode through Sn addition for sodium-ion batteries[J]. Journal of Physical Chemistry C, 125, 6593(2021).

[33] MENG X, ZHANG D, ZHAO Z et al. O3-NaNi_(0.47)Zn_(0.03)Mn_(0.5)O₂ cathode material for durable Na-ion batteries[J]. Journal of Alloys and Compounds, 887, 161366(2021).

[34] ANANG D A, BHANGE D S, ALI B et al. New O3-type layer- structured Na_0.80[Fe_0.40Co_0.40Ti_0.20]O₂ cathode material for rechargeable sodium-ion batteries[J]. Materials (Basel), 14, 2363(2021).

[35] LAMB J, MANTHIRAM A. Surface-modified Na(Ni_0.3Fe_0.4Mn_0.3)O₂ cathodes with enhanced cycle life and air stability for sodium-ion batteries[J]. ACS Applied Energy Materials, 4, 11735(2021).

[36] CHEN C, HUANG W, LI Y et al. P2/O3 biphasic Fe/Mn-based layered oxide cathode with ultrahigh capacity and great cyclability for sodium ion batteries[J]. Nano Energy, 90, 106504(2021).

[37] ZHENG Y M, HUANG X B, MENG X M et al. Copper and zirconium codoped O3-type sodium iron and manganese oxide as the cobalt/nickel-free high-capacity and air-stable cathode for sodium-ion batteries[J]. ACS Applied Materials & Interfaces, 13, 45528(2021).