[1] [1] CHOHAN J S, SINGH R, BOPARAI K S, et al. Dimensional accuracy analysis of coupled fused deposition modeling and vapour smoothing operations for biomedical applications[J]. Compos Part B Eng, 2017, 117: 138–149.

[2] [2] FU S Y, ZHU M, ZHU Y F. Organosilicon polymer-derived ceramics: an overview[J]. J Adv Ceram, 2019, 8(4): 457–478.

[3] [3] SING S, YEONG W, WIRIA F E, et al. Direct selective laser sintering and melting of ceramics: A review[J]. Rapid Prototyp J, 2017, 23: 611–623.

[4] [4] WANG X F, SCHMIDT F, HANAOR D, et al. Additive manufacturing of ceramics from preceramic polymers: A versatile stereolithographic approach assisted by thiol-ene click chemistry[J]. Addit Manuf, 2019, 27: 80–90.

[5] [5] WANG W, SUN J X, GUO B B, et al. Fabrication of piezoelectric nano-ceramics via stereolithography of low viscous and non-aqueous suspensions[J]. J Eur Ceram Soc, 2020, 40(3): 682–688.

[6] [6] RUESCHHOFF L, COSTAKIS W, MICHIE M, et al. Additive manufacturing of dense ceramic parts via direct ink writing of aqueous alumina suspensions[J]. Int J Appl Ceram Technol, 2016, 13(5): 821–830.

[7] [7] EQTESADI S, MOTEALLEH A, PERERA F H, et al. Fabricating geometrically-complex B4C ceramic components by robocasting and pressureless spark plasma sintering[J]. Scr Mater, 2018, 145: 14–18.

[8] [8] GHAZANFARI A, LI W B, LEU M C, et al. A novel freeform extrusion fabrication process for producing solid ceramic components with uniform layered radiation drying[J]. Addit Manuf, 2017, 15: 102–112.

[9] [9] MAURATH J, WILLENBACHER N. 3D printing of open-porous cellular ceramics with high specific strength[J]. J Eur Ceram Soc, 2017, 37(15): 4833–4842.

[10] [10] LE T T, AUSTIN S A, LIM S, et al. Hardened properties of high-performance printing concrete[J]. Cem Concr Res, 2012, 42(3): 558–566.

[11] [11] PAUL S C, TAY Y W D, PANDA B, et al. Fresh and hardened properties of 3D printable cementitious materials for building and construction[J]. Arch Civ Mech Eng, 2018, 18(1): 311–319.

[12] [12] ZAREIYAN B, KHOSHNEVIS B. Interlayer adhesion and strength of structures in Contour Crafting — Effects of aggregate size, extrusion rate, and layer thickness[J]. Autom Constr, 2017, 81: 112–121.

[13] [13] PANDA B, CHANDRA PAUL S, TAN M J. Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material[J]. Mater Lett, 2017, 209: 146–149.

[14] [14] TANG S Y, FAN Z T, ZHAO H P, et al. Layered extrusion forming—A simple and green method for additive manufacturing ceramic core[J]. Int J Adv Manuf Technol, 2018, 96(9–12): 3809–3819.

[15] [15] TANG S Y, YANG L, LI G J, et al. Effect of the addition of silica Sol on layered extrusion forming of Al2O3-based cores[J]. Adv Appl Ceram, 2019, 118(3): 145–152.