[1] XIAN Yong, LI Wenqiang, ZHAO Xiang. Design of an airborne telescope optical system with multispectrum and common aperture[J]. Electronics Optics & Control, 27, 109-112(2020).

[2] LEE J H, JUNG Y S, RYOO S Y et al. Imaging performance analysis of an EO/IR dual band airborne camera[J]. Journal of the Optical Society of Korea, 15, 174-181.(2011).

[3] ANEES A[M]. Handbook of optomechanical engineer-ing, 300-358(2017).

[4] YODER P R, VUKOBRATOVICH D[M]. Opto-mechanical systems design, 440-450(2015).

[5] LUO Zhibang, LI Wei, XU Jiakun et al. Design of primary mirror assembly with compound support for φ816 mm near space telescope[J]. Optics and Precision Engineering, 29, 558-569(2021).

[6] WANG Kejun, DONG Jihong, ZHOU Pingwei et al. Back support structure design of mirror of space remote sensor[J]. Infrared and Laser Engineering, 48, 0718004-1-11(2019).

[7] CHENG Zhifeng, LIU Fuhe, XUN Xian et al. Opto-mechanical design and analysis of dual-band sharing aperture imaging system[J]. Infrared and Laser Engineering, 44, 3366-3372(2015).

[8] LI Meng, YAN Yufeng, BAI Suping. Structural design of primary mirror support for the front optical system of the onboard spectrometer[J]. Journal of Changchun University of Science and Technology (Natural Science Edition), 43, 62-67(2020).

[9] WEI Mengqi, GAO Shilin, WEN Qingrong et al. The lightweight design and analysis of the primary mirror for a new airborne opto-electronic system[J]. Laser & Infrared, 51, 634-639(2015).

[10] YANG Liwei, LI Zhilai, XUE Donglin. Analysis and test for effect of structural adhesive shrinkage during curing on mirror surface[J]. Optical Techniue, 40, 307-312(2014).

[11] ZHOU Xiaohua, XING Hui, YANG Jukui. Epoxy selection for reflect mirror assembly in space remote sensor[J]. Spacecraft Recovery & Remote Sensing, 40, 65-71(2019).

[12] HAN Xu, WU Qingwen, DONG Deyi et al. Application of RTV adhesive modeling to structure analysis of reflective mirror[J]. Optics and Precidion Engineering, 18, 118-125(2010).

[13] DOYLE K B, MICHELS G J, GENBERG V L. Athermal design of nearly incompressible bonds[J]. SPIE, 4771, 296-303(2002).

[14] LIU Qiang, HE Xin, ZHANG Feng et al. Calculational and control of adhesive layer in reflector athermal mount[J]. Optics and Precision Engineering, 20, 2229-2236(2012).

[15] YANG Jianli, QI Yuan, YANG Xiaoqiang et al. Flexible support structure design of lightweight thin reflector[J]. Journal of Applied Optics, 38, 815-819(2017).

[16] WANG Zhongsu, ZHAI Yan, MEI Gui. Design of flexible support structure of reflector in space remote sensor[J]. Optics and Precision Engineering, 18, 1833-1839(2010).

[17] LI Weiyan, LYU Qunbo, LIU Yangyang et al. Thermal characteristics analysis and verification of primary supporting structure for spaceborne camera based on low volume SiC/Al primary mirror frame[J]. Acta Photonica Sinica, 50, 0412001-1-10(2021).

[18] ZHANG Ying, DING Zhenmin, ZHAO Huijie et al. Integrated optomechanical analysis the displacement of the mirror body separation[J]. Infrared and Laser Engineering, 41, 2763-2767(2012).

[19] DOYLE K B, MICHELS G J, GENBERG V L[M]. Integrated optomechanical analysis, 100-150(2002).

[20] DOYLE K B, GENBERG V L, MICHELS G J et al. Optical modeling of finite element surface displacements using commercial software[J]. SPIE, 5867, 1-12(2005).

[21] LIU Jiaguo, LI Lin. Study on the data transfer interface in the thermal/structural/optical integrated analysis[J]. Transactions of Beijing Institute of Technology, 27, 428-431(2007).

[22] YANG Xiaoqiang. Line-of-sight jitter of Cassegrain system under vibration[J]. Journal of Applied Optics, 39, 60-64(2018).

[23] JI Wenchen, ZHANG Yu, HUANG Pan. Effect of temperature gradient on imaging quality of infrared optical system[J]. Laser & Infrared, 42, 640-645(2015).