[2] [2] TANG S W, YAO Y, ANDRADE C, et al. Recent durability studies on concrete structure[J]. Cem Concr Res, 2015, 78: 143-154.

[3] [3] PLANK J, SAKAI E, MIAO C W, et al. Chemical admixtures— Chemistry, applications and their impact on concrete microstructure and durability[J]. Cem Concr Res, 2015, 78: 81-99.

[4] [4] ZHANG J, MA Y F, WANG J, et al. A novel shrinkage-reducing polycarboxylate superplasticizer for cement-based materials: Synthesis, performance and mechanisms[J]. Constr Build Mater, 2022, 321: 126342.

[5] [5] ZUO W Q, FENG P, ZHONG P H, et al. Effects of novel polymer-type shrinkage-reducing admixture on early age autogenous deformation of cement pastes[J]. Cem Concr Res, 2017, 100: 413-422.

[6] [6] YANG G, WU Y K, LI H, et al. Effect of shrinkage-reducing polycarboxylate admixture on cracking behavior of ultra-high strength mortar[J]. Cem Concr Compos, 2021, 122: 104117.

[8] [8] WANG K, MOON J, DU H J, et al. Early-age shrinkage and hydration of concrete incorporating a mutually reinforcing systems of super absorbent polymers and MgO expansive agent under low humidity conditions[J]. Constr Build Mater, 2024, 417: 135350.

[10] [10] LIU J P, LI L, MIAO C W, et al. Reduction of water evaporation and cracks on plastic concrete surface by monolayers[J]. Colloids Surf A Physicochem Eng Aspects, 2011, 384(1-3): 496-500.

[12] [12] LIU J P, TIAN Q, WANG Y J, et al. Evaluation method and mitigation strategies for shrinkage cracking of modern concrete[J]. Engineering, 2021, 7(3): 348-357.

[13] [13] WANG W, LIU J, LI L, et al. Novel Admixture Using to Control the Hydration Evolution and Temperature Rise of Concrete [C]//3rd International RILEM Conference on Microstructure Related Durability of Cementitious Composites, October 24-26, 2016, Nanjing: 358-365.

[14] [14] YAN Y, OUZIA A, YU C, et al. Effect of a novel starch-based temperature rise inhibitor on cement hydration and microstructure development[J]. Cem Concr Res, 2020, 129: 105961.

[15] [15] YAN Y, SCRIVENER K L, YU C, et al. Effect of a novel starch-based temperature rise inhibitor on cement hydration and microstructure development: The second peak study[J]. Cem Concr Res, 2021, 141: 106325.

[16] [16] ZHOU Y C, YAN Y, QIN Y, et al. The effect of temperature rise inhibitor on the hydration and strength development of slag/fly ash blended cement paste[J]. Constr Build Mater, 2023, 395: 132307.

[17] [17] HU Z L, WYRZYKOWSKI M, GRIFFA M, et al. Young’s modulus and creep of calcium-silicate-hydrate compacts measured by microindentation[J]. Cem Concr Res, 2020, 134: 106104.

[18] [18] FU Q, ZHANG Z R, ZHAO X, et al. Effect of nano calcium carbonate on hydration characteristics and microstructure of cement-based materials: A review[J]. J Build Eng, 2022, 50: 104220.

[19] [19] ZHANG P, WANG M H, HAN X, et al. A review on properties of cement-based composites doped with graphene[J]. J Build Eng, 2023, 70: 106367.

[20] [20] SANTOS R F, RIBEIRO J C L, FRANCO DE CARVALHO J M, et al. Nanofibrillated cellulose and its applications in cement-based composites: A review[J]. Constr Build Mater, 2021, 288: 123122.

[21] [21] ROSEWITZ J A, CHOSHALI H A, RAHBAR N. Bioinspired design of architected cement-polymer composites[J]. Cem Concr Compos, 2019, 96: 252-265.

[22] [22] OHAMA B Y. Handbook of polymer-modified concrete and mortars: properties and process technology[M]. Park Ridge, N.J.: Noyes Publications, 1995.

[23] [23] ZHANG X J, DU M R, FANG H Y, et al. Polymer-modified cement mortars: Their enhanced properties, applications, prospects, and challenges[J]. Constr Build Mater, 2021, 299: 124290.

[24] [24] PAN H, SHE W, ZUO W Q, et al. Hierarchical toughening of a biomimetic bulk cement composite[J]. ACS Appl Mater Interfaces, 2020, 12(47): 53297-53309.

[25] [25] HOU D S, YU J, WANG P. Molecular dynamics modeling of the structure, dynamics, energetics and mechanical properties of cement-polymer nanocomposite[J]. Compos Part B Eng, 2019, 162: 433-444.

[26] [26] WU K, LONG J F, QING L B, et al. Recent advance of monomer in situ polymerization modified cement-based materials[J]. Constr Build Mater, 2024, 432: 136542.

[27] [27] LIANG R, LIU Q, HOU D S, et al. Flexural strength enhancement of cement paste through monomer incorporation and in situ bond formation[J]. Cem Concr Res, 2022, 152: 106675.

[28] [28] XU C J, DAI Y Q, PENG Y, et al. Multi-scale structure of in situ polymerized cementitious composites with improved flowability, strength, deformability and anti-permeability[J]. Compos Part B Eng, 2022, 245: 110222.

[29] [29] CHEN B M, QIAO G, HOU D S, et al. Cement-based material modified by in situ polymerization: From experiments to molecular dynamics investigation[J]. Compos Part B Eng, 2020, 194: 108036.

[31] [31] MYSZKA B, HURLE K, ZHENG K, et al. Mechanical improvement of calcium carbonate cements by in situ HEMA polymerization during hardening[J]. J Mater Chem B, 2019, 7(21): 3403-3411.

[32] [32] LIU Q, LIU R J, WANG Q, et al. Cement mortar with enhanced flexural strength and durability-related properties using in situ polymerized interpenetration network[J]. Front Struct Civ Eng, 2021, 15(1): 99-108.

[33] [33] YIN B, HUA X L, QI D M, et al. Performance cement-based composite obtained by in situ growth of organic-inorganic frameworks during the cement hydration[J]. Constr Build Mater, 2022, 336: 127533.

[34] [34] ZHANG H B, ZHOU R, LIU S H, et al. Enhanced toughness of ultra-fine sulphoaluminate cement-based hybrid grouting materials by incorporating in situ polymerization of acrylamide[J]. Constr Build Mater, 2021, 292: 123421.

[35] [35] YIN B, HUA X L, QI D M, et al. Multi-scale synergistic modification and mechanical properties of cement-based composites based on in situ polymerization[J]. Cem Concr Compos, 2023, 137: 104945.

[36] [36] ZHENG L, WU Y Q, LI X G, et al. Molecular-level topological deep cross-fusion strategy towards organic-inorganic lightweight composites[J]. Chem Eng J, 2023, 474: 145666.

[37] [37] ZHOU W G, YE Q Q, CAO J F, et al. Performance improvement of magnesium oxychloride cement via nanoparticles-enhanced organic- inorganic hybrid network[J]. Constr Build Mater, 2022, 343: 128096.

[38] [38] HUA X L, HAN K L, LIN Z H, et al. Modification of in situ polymerization of acrylamide and synergies with fiber in enhancing cement-based composite[J]. J Build Eng, 2024, 85: 108605.

[40] [40] HU X Y, XIAO J, ZHANG Z D, et al. Effects of CCCW on properties of cement-based materials: A review[J]. J Build Eng, 2022, 50: 104184.

[41] [41] LIN X Q, LI W G, CASTEL A, et al. A comprehensive review on self-healing cementitious composites with crystalline admixtures: Design, performance and application[J]. Constr Build Mater, 2023, 409: 134108.

[42] [42] SISOMPHON K, COPUROGLU O, KOENDERS E A B. Effect of exposure conditions on self healing behavior of strain hardening cementitious composites incorporating various cementitious materials[J]. Constr Build Mater, 2013, 42: 217-224.

[43] [43] PARK B, CHOI Y C. Self-healing capability of cementitious materials with crystalline admixtures and super absorbent polymers (SAPs)[J]. Constr Build Mater, 2018, 189: 1054-1066.

[44] [44] ESCOFFRES P, DESMETTRE C, CHARRON J P. Effect of a crystalline admixture on the self-healing capability of high-performance fiber reinforced concretes in service conditions[J]. Constr Build Mater, 2018, 173: 763-774.

[45] [45] CHANDRA SEKHARA REDDY T, RAVITHEJA A. Macro mechanical properties of self healing concrete with crystalline admixture under different environments[J]. Ain Shams Eng J, 2019, 10(1): 23-32.

[46] [46] JEON S, HOSSAIN M S, HAN S, et al. Self-healing characteristics of cement concrete containing expansive agent[J]. Case Stud Constr Mater, 2022, 17: e01609.

[48] [48] QURESHI T, KANELLOPOULOS A, AL-TABBAA A. Autogenous self-healing of cement with expansive minerals-II: Impact of age and the role of optimised expansive minerals in healing performance[J]. Constr Build Mater, 2019, 194: 266-275.

[49] [49] SNOECK D, VAN DEN HEEDE P, VAN MULLEM T, et al. Water penetration through cracks in self-healing cementitious materials with superabsorbent polymers studied by neutron radiography[J]. Cem Concr Res, 2018, 113: 86-98.

[50] [50] SNOECK D, DE BELIE N. Autogenous healing in strain-hardening cementitious materials with and without superabsorbent polymers: An 8-year study[J]. Front Mater, 2019, 6: 48.

[51] [51] LEE H D, WONG H S, BUENFELD N R. Potential of superabsorbent polymer for self-sealing cracks in concrete[J]. Adv Appl Ceram, 2010, 109(5): 296-302.

[52] [52] WANG R, TIAN Q, ZHANG S Z, et al. Improving efficiency of calcium oxide expansive additives by polylactic acid film[J]. Mag Concr Res, 2016, 68(20): 1070-1078.

[54] [54] LEE H X D, WONG H S, BUENFELD N R. Self-sealing of cracks in concrete using superabsorbent polymers[J]. Cem Concr Res, 2016, 79: 194-208.

[55] [55] SISOMPHON K, COPUROGLU O, KOENDERS E A B. Self-healing of surface cracks in mortars with expansive additive and crystalline additive[J]. Cem Concr Compos, 2012, 34(4): 566-574.

[56] [56] LAUCH K S, CHARRON J P, DESMETTRE C. Comprehensive evaluation of self-healing of concrete with different admixtures under laboratory and long-term outdoor expositions[J]. J Build Eng, 2022, 54: 104661.

[58] [58] TUNSTALL L E, LEY M T, SCHERER G W. Air entraining admixtures: Mechanisms, evaluations, and interactions[J]. Cem Concr Res, 2021, 150: 106557.

[59] [59] SHAH H A, YUAN Q, ZUO S H. Air entrainment in fresh concrete and its effects on hardened concrete-a review[J]. Constr Build Mater, 2021, 274: 121835.

[60] [60] SHAN G C, ZHAO S, QIAO M, et al. Synergism effects of coconut diethanol amide and anionic surfactants for entraining stable air bubbles into concrete[J]. Constr Build Mater, 2020, 237: 117625.

[61] [61] CHEN J, QIAO M, GAO N X, et al. Sulfonic gemini surfactants: Synthesis, properties and applications as novel air entraining agents for concrete[J]. Colloids Surf A Physicochem Eng Aspects, 2017, 522: 593-600.

[62] [62] QIAO M, CHEN J, YU C, et al. Gemini surfactants as novel air entraining agents for concrete[J]. Cem Concr Res, 2017, 100: 40-46.

[63] [63] CHEN J, QIAO M, GAO N X, et al. Cationic oligomeric surfactants as novel air entraining agents for concrete[J]. Colloids Surf A Physicochem Eng Aspects, 2018, 538: 686-693.

[64] [64] SHE W, DU Y, MIAO C W, et al. Application of organic- and nanoparticle-modified foams in foamed concrete: Reinforcement and stabilization mechanisms[J]. Cem Concr Res, 2018, 106: 12-22.

[65] [65] DU Z X, XIONG J B, ZUO W Q, et al. Using modified nano-silica to prevent bubble Ostwald ripening under low atmospheric pressure: From liquid foam to air-entrained cement mortar[J]. Cem Concr Compos, 2022, 132: 104627.

[66] [66] SHEN F, CHEN J, QIAO M, et al. Effect of particle properties on the resulting bubble quality and stability: From solution foam to air-entrained cement mortars[J]. Constr Build Mater, 2024, 432: 136596.

[67] [67] TIBBETTS C M, RIDING K A, FERRARO C C. A critical review of the testing and benefits of permeability-reducing admixtures for use in concrete[J]. Cement, 2021, 6: 100016.

[68] [68] FENG Z J, WANG F J, XIE T, et al. Integral hydrophobic concrete without using silane[J]. Constr Build Mater, 2019, 227: 116678.

[69] [69] MORA E, GONZLEZ G, ROMERO P, et al. Control of water absorption in concrete materials by modification with hybrid hydrophobic silica particles[J]. Constr Build Mater, 2019, 221: 210-218.

[70] [70] MENG F, DONG L, WU Y L, et al. Effects and mechanisms of capric acid/silica capsule on water absorption reduction of cement paste[J]. Constr Build Mater, 2023, 404: 133208.

[71] [71] YAO H, XIE Z L, HUANG C H, et al. Recent progress of hydrophobic cement-based materials: Preparation, characterization and properties[J]. Constr Build Mater, 2021, 299: 124255.

[72] [72] ZHANG B, LI Q B, NIU X J, et al. Influence of a novel hydrophobic agent on freeze-thaw resistance and microstructure of concrete[J]. Constr Build Mater, 2021, 269: 121294.

[73] [73] WANG M L, WANG Q, MAO J H, et al. Study on water-repellent and corrosion-resistant properties of cement mortar using superhydrophobic iron ore tailings[J]. J Build Eng, 2022, 62: 105360.

[74] [74] TITTARELLI F. Oxygen diffusion through hydrophobic cement-based materials[J]. Cem Concr Res, 2009, 39(10): 924-928.

[75] [75] LIANG C, ZHAO P Q, LIU L, et al. Fabrication of bulk hydrophobic cement-based materials with ultra-high impermeability[J]. J Build Eng, 2023, 63: 105492.

[76] [76] CAI J S, RAN Q P, MA Q, et al. Influence of a nano-hydrophobic admixture on concrete durability and steel corrosion[J]. Materials (Basel), 2022, 15(19): 6842.

[77] [77] YANG L, PANG Y Y, TANG Q, et al. Effects of the stearic acid modified mica powder on hydrophobic properties and salt freezing resistance of mortar: Experimental study and microscopic mechanism analysis[J]. Constr Build Mater, 2024, 416: 135188.

[78] [78] PANG Y Y, TANG Q, YANG L, et al. Development of a hydrophobic cement mortar with controllable strength: Preparation and micro- mechanism analysis[J]. Constr Build Mater, 2023, 403: 133216.

[79] [79] AL-JABARI M, AL-RASHED R, AYERS M E. Mitigation of alkali silica reactions in concrete using multi-crystalline intermixed waterproofing materials[J]. CEMENT, 2023, 12: 100065.

[80] [80] ZHANG L, WANG S C, YANG G K, et al. Improving freeze resistance of cement-based materials with modified graphite-paraffin composite low-temperature microencapsulated phase change materials[J]. J Build Eng, 2024, 90: 109456.

[81] [81] YOUNG T. III. An essay on the cohesion of fluids[J]. Phil Trans R Soc, 1805, 95: 65-87.

[82] [82] WENZEL R N. Resistance of solid surfaces to wetting by water[J]. Ind Eng Chem, 1936, 28(8): 988-994.

[83] [83] CASSIE A B D, BAXTER S. Wettability of porous surfaces[J]. Trans Faraday Soc, 1944, 40: 546-551.

[84] [84] BIKERMAN J J. Solid-liquid[M]//Surface Chemistry. Amsterdam: Elsevier, 1958: 263-339.

[85] [85] HUANG J L, CHEN R X, ZHOU Y, et al. Molecular design and experiment of ion transport inhibitors towards concrete sustainability[J]. Cem Concr Compos, 2022, 133: 104710.

[86] [86] ZHOU Y, CAI J S, HOU D S, et al. The inhibiting effect and mechanisms of smart polymers on the transport of fluids throughout nano-channels[J]. Appl Surf Sci, 2020, 500: 144019.

[87] [87] KOTOP M A, EL-FEKY M S, ALHARBI Y R, et al. Engineering properties of geopolymer concrete incorporating hybrid nano-materials[J]. Ain Shams Eng J, 2021, 12(4): 3641-3647.

[88] [88] LIU R, XIAO H G, GENG J S, et al. Effect of nano-CaCO3 and nano-SiO2 on improving the properties of carbon fibre-reinforced concrete and their pore-structure models[J]. Constr Build Mater, 2020, 244: 118297.

[89] [89] HOSAN A, SHAIKH F U A, SARKER P, et al. Nano- and micro-scale characterisation of interfacial transition zone (ITZ) of high volume slag and slag-fly ash blended concretes containing nano SiO2 and nano CaCO3[J]. Constr Build Mater, 2021, 269: 121311.

[90] [90] ZHANG M H, DU L, LI Z Y, et al. Durability of marine concrete doped with nanoparticles under joint action of Cl- erosion and carbonation[J]. Case Stud Constr Mater, 2023, 18: e01982.

[91] [91] HUO W W, ZHU Z D, SUN H, et al. Reaction kinetics, mechanical properties, and microstructure of nano-modified recycled concrete fine powder/slag based geopolymers[J]. J Clean Prod, 2022, 372: 133715.

[92] [92] XIAO H G, ZHANG F L, LIU R, et al. Effects of pozzolanic and non-pozzolanic nanomaterials on cement-based materials[J]. Constr Build Mater, 2019, 213: 1-9.

[93] [93] SUN H F, REN Z L, LING L, et al. Influence of graphene oxide on interfacial transition zone of mortar[J]. J Nanomater, 2020, 2020: 8919681.

[94] [94] NAZARI A, RIAHI S. Improvement compressive strength of concrete in different curing media by Al2O3 nanoparticles[J]. Mater Sci Eng A, 2011, 528(3): 1183-1191.

[95] [95] KAUR R, KOTHIYAL N C. Synergic influence of fly ash and graphene oxide-carbon nanotubes hybrid on mechanical, microstructural and porosity properties of cement mortars[J]. J Adhes Sci Technol, 2021, 35(16): 1777-1805.

[96] [96] YU L Z, WU R X. Using graphene oxide to improve the properties of ultra-high-performance concrete with fine recycled aggregate[J]. Constr Build Mater, 2020, 259: 120657.

[97] [97] ZHANG M H, LI H. Pore structure and chloride permeability of concrete containing nano-particles for pavement[J]. Constr Build Mater, 2011, 25(2): 608-616.

[98] [98] SHAIKH F U A, SUPIT S W M. Mechanical and durability properties of high volume fly ash (HVFA) concrete containing calcium carbonate (CaCO3) nanoparticles[J]. Constr Build Mater, 2014, 70: 309-321.

[99] [99] SCARFATO P, DI MAIO L, FARIELLO M L, et al. Preparation and evaluation of polymer/clay nanocomposite surface treatments for concrete durability enhancement[J]. Cem Concr Compos, 2012, 34(3): 297-305.

[100] [100] ZHAN P M, XU J, WANG J, et al. A review of recycled aggregate concrete modified by nanosilica and graphene oxide: Materials, performances and mechanism[J]. J Clean Prod, 2022, 375: 134116.

[101] [101] MATALKAH F, ABABNEH A, AQEL R. Effects of nanomaterials on mechanical properties, durability characteristics and microstructural features of alkali-activated binders: A comprehensive review[J]. Constr Build Mater, 2022, 336: 127545.

[102] [102] MENG T, HONG Y P, WEI H D, et al. Effect of nano-SiO2 with different particle size on the hydration kinetics of cement[J]. Thermochim Acta, 2019, 675: 127-133.

[103] [103] BOLZONI F, NATTA\ G, et al. Experiences on corrosion inhibitors for reinforced concrete[J]. Int J Corros Scale Inhib, 2014, 3(4): 254-278.

[104] [104] LIU J P, CAI J S, SHI L, et al. The inhibition behavior of a water-soluble silane for reinforcing steel in 3.5% NaCl saturated Ca(OH)2 solution[J]. Constr Build Mater, 2018, 189: 95-101.

[105] [105] CAI J, CHEN C, LIU J, et al. Corrosion resistance of carbon steel in simulated concrete pore solution in presence of 1-dihydroxyethylamino- 3-dipropylamino-2-propanol as corrosion inhibitor[J]. Corros Eng Sci Technol, 2014, 49(1): 66-72.

[106] [106] XU C, JIN W L, WANG H L, et al. Organic corrosion inhibitor of triethylenetetramine into chloride contamination concrete by eletro-injection method[J]. Constr Build Mater, 2016, 115: 602-617.

[107] [107] SHEN L, JIANG H, CAO J D, et al. A comparison study of the performance of three electro-migrating corrosion inhibitors in improving the concrete durability and rehabilitating decayed reinforced concrete[J]. Constr Build Mater, 2020, 238: 117673.

[108] [108] LIU J Z, CAI J S, SHI L, et al. Corrosion behavior of carbon steel in chloride contaminated simulated concrete pore solution with carboxylate of benzoic acid and dimethylethanolamine[J]. Anti Corros Meth Mater, 2017, 64(5): 555-562.

[109] [109] DIAMANTI M V, PREZ ROSALES E A, RAFFAINI G, et al. Molecular modelling and electrochemical evaluation of organic inhibitors in concrete[J]. Corros Sci, 2015, 100: 231-241.

[110] [110] TEYMOURI F, ALLAHKARAM S R, SHEKARCHI M, et al. A comprehensive study on the inhibition behaviour of four carboxylate-based corrosion inhibitors focusing on efficiency drop after the optimum concentration for carbon steel in the simulated concrete pore solution[J]. Constr Build Mater, 2021, 296: 123702.

[111] [111] LIU Y Q, ZHOU X C, GUAN X D, et al. Synergistic inhibition mechanism of phosphate and phytic acid on carbon steel in carbonated concrete pore solutions containing chlorides[J]. Corros Sci, 2022, 208: 110637.

[113] [113] LIU Z C, ZHANG F R, LI X, et al. Improved corrosion inhibition of calcium disodium EDTA for mild steel in chloride-contaminated concrete pore solution[J]. Cem Concr Compos, 2023, 140: 105075.

[114] [114] FAZAYEL A S, KHORASANI M, SARABI A A. The effect of functionalized polycarboxylate structures as corrosion inhibitors in a simulated concrete pore solution[J]. Appl Surf Sci, 2018, 441: 895-913.

[115] [115] ZHI F F, JIANG L H, JIN M, et al. Inhibition effect and mechanism of polyacrylamide for steel corrosion in simulated concrete pore solution[J]. Constr Build Mater, 2020, 259: 120425.

[116] [116] MONTICELLI C, FRIGNANI A, TRABANELLI G. A study on corrosion inhibitors for concrete application[J]. Cem Concr Res, 2000, 30(4): 635-642.

[117] [117] WANG D Q, MING J, SHI J J. Enhanced corrosion resistance of rebar in carbonated concrete pore solutions by Na2HPO4 and benzotriazole[J]. Corros Sci, 2020, 174: 108830.

[118] [118] CAI J S, LIU J P, MU S, et al. Corrosion inhibition effect of three imidazolium ionic liquids on carbon steel in chloride contaminated environment[J]. Int J Electrochem Sci, 2020, 15(2): 1287-1301.

[119] [119] MA Q, CAI J S, MU S, et al. Novel perimidine derivatives as corrosion inhibitors of HRB400 steel in simulated concrete pore solution[J]. Coatings, 2022, 13(1): 73.

[120] [120] ETTEYEB N, NVOA X R. Inhibition effect of some trees cultivated in arid regions against the corrosion of steel reinforcement in alkaline chloride solution[J]. Corros Sci, 2016, 112: 471-482.

[121] [121] ANITHA R, CHITRA S, HEMAPRIYA V, et al. Implications of eco-addition inhibitor to mitigate corrosion in reinforced steel embedded in concrete[J]. Constr Build Mater, 2019, 213: 246-256.

[122] [122] LIU C X, LIU Y P, XIA Z H, et al. Coconut coir dust extract as a novel green corrosion inhibitor for carbon steel in the chloride-contaminated concrete pore solution[J]. J Build Eng, 2024, 82: 108194.

[123] [123] CHEN M Z, YUAN H H, QIN X, et al. Improve corrosion resistance of steel bars in simulated concrete pore solution by the addition of EDTA intercalated CaAl-LDH[J]. Corros Sci, 2024, 226: 111636.

[124] [124] GONZLEZ-CONEO J, ZARZUELA R, LUNA M, et al. Water-soluble fluorosilane supplemented with fumed silica as admixture for producing hydrophobic concrete: Effects on cement hydration, mechanical properties and water protection properties[J]. Dev Built Environ, 2024, 17: 100317.

[125] [125] LIU J Z, ZHAO D, CAI J S, et al. Investigation of C-glycosidic ketone as a corrosion inhibitor for carbon steel in 3.5% NaCl saturated Ca(OH)2 solution[J]. Int J Electrochem Sci, 2016, 11(10): 8758-8778.

[126] [126] WANG X Y, LEE S, CHO H. Penetration properties and injecting conditions of corrosion inhibitor for concrete[J]. Constr Build Mater, 2021, 284: 122761.

[127] [127] MOHAMED A, VISCO D P, BASTIDAS D M. Effect of cations on the activity coefficient of NO2-/NO3-corrosion inhibitors in simulated concrete pore solution: An electrochemical thermodynamics study[J]. Corros Sci, 2022, 206: 110476.

[128] [128] BASTIDAS D M, CRIADO M, LA IGLESIA V M, et al. Comparative study of three sodium phosphates as corrosion inhibitors for steel reinforcements[J]. Cem Concr Compos, 2013, 43: 31-38.

[129] [129] MOHAMED A, MARTIN U, VISCO D P Jr, et al. Interphase corrosion inhibition mechanism of sodium borate on carbon steel rebars in simulated concrete pore solution[J]. Constr Build Mater, 2023, 408: 133763.

[130] [130] RAKANTA E, ZAFEIROPOULOU T, BATIS G. Corrosion protection of steel with DMEA-based organic inhibitor[J]. Constr Build Mater, 2013, 44: 507-513.

[131] [131] GHARIEB M, ABOUTALEB S A, DOKAILA A M, et al. Impact of combined organic chemical inhibitor on mechanical properties of cement pastes and steel reinforcement corrosion in concrete upon exposure to aggressive environment[J]. Constr Build Mater, 2024, 420: 135567.

[132] [132] PURNIMA, GOYAL S, LUXAMI V. Exploring the corrosion inhibition mechanism of Serine (Ser) and Cysteine (Cys) in alkaline concrete pore solution simulating carbonated environment[J]. Constr Build Mater, 2023, 384: 131433.

[133] [133] RAJPUT T S, PURNIMA, GOYAL A, et al. Effect of 2-amino pyridine inhibitor on the rehabilitation of chloride contaminated reinforced concrete with bidirectional electromigration method[J]. Constr Build Mater, 2024, 412: 134754.

[134] [134] VOLPI E, FOIADELLI C, TRASATTI S, et al. Development of smart corrosion inhibitors for reinforced concrete structures exposed to a microbial environment[J]. Ind Eng Chem Res, 2017, 56(20): 5778-5794.

[135] [135] HU J, ZHU Y Y, HANG J Z, et al. The effect of organic core-shell corrosion inhibitors on corrosion performance of the reinforcement in simulated concrete pore solution[J]. Constr Build Mater, 2021, 267: 121011.

[136] [136] ZHANG Q, FENG P, SHI J J, et al. Controlled release of corrosion inhibitor from microwave-responsive capsules and anti-corrosion performance of steel bars[J]. Corros Sci, 2022, 207: 110572.

[137] [137] CAO Y H, DONG S G, ZHENG D J, et al. Multifunctional inhibition based on layered double hydroxides to comprehensively control corrosion of carbon steel in concrete[J]. Corros Sci, 2017, 126: 166-179.

[138] [138] XU J X, WEI J F, MA G X, et al. Effect of MgAl-NO2 LDHs inhibitor on steel corrosion in chloride-free and contaminated simulated carbonated concrete pore solutions[J]. Corros Sci, 2020, 176: 108940.

[139] [139] MA G X, XU J X, WANG Z H. Inhibitive effect of sepiolite-supported MgAl-LDH on chloride-induced corrosion of steel in simulated concrete pore solution[J]. Corros Sci, 2023, 225: 111571.

[140] [140] YANG H, LI W H, LIU X Y, et al. Preparation of corrosion inhibitor loaded zeolites and corrosion resistance of carbon steel in simulated concrete pore solution[J]. Constr Build Mater, 2019, 225: 90-98.