[1] [1] XU Z H. Experimental study on robot laser welding of galvanized sheet of automobile body in white ［D］. Zhenjiang: Jiangsu University, 2010: 32-37(in Chinese).

[2] [2] BURNS T. Weldability of a dual-phase sheet steel by the gas metal arc welding process ［D］. Waterloo, Canada: the University of Waterloo, 2009:12-17.

[3] [3] SHAO J,YAN Y. Review of techniques for on-line monitoring and inspection of laser welding［J］. Journal of Physics Conference, 2005, 15(1):101-107.

[4] [4] WANG P,CHEN X,PAN Q, et al. Laser welding dissimilar materials of aluminum to steel: An overview［J］. International Journal of Advanced Manufacturing Technology, 2016, 87(9-12):1-10.

[5] [5] HUANG L, CHEN X Zh, MA H B, et al. Laser welding properties and process of DP780 galvanized steel［J］. Journal of Welding, 2018, 39(8):55-58 ( in Chinese).

[6] [6] CHEN W, ACKERSON P, MOLIAN P. CO2 laser welding of galvanized steel sheets using vent holes［J］. Materials & Design, 2009, 30(2):245-251.

[7] [7] CHEN Z, YANG S, WANG C, et al. A study of fiber laser welding of galvanized steel using a suction method［J］. Journal of Materials Processing Technology, 2014, 214(7):1456-1465.

[8] [8] MA J, KONG F, CARLSON B, et al. Two-pass laser welding of galvanized high-strength dual-phase steel for a zero-gap lap joint confi-guration［J］. Journal of Materials Processing Technology, 2013, 213(3):495-507.

[9] [9] SCHMIDT M, OTTO A, GELER C. Analysis of YAG laser lap-welding of zinc coated steel sheets［J］. CIRP Annals-Manufacturing Technology, 2008, 57(1):213-216.

[10] [10] DENG S J, WANG H P, LU F G, et al. Investigation of spatter occurrence in remote laser spiral welding of zinc-coated steels［J］. International Journal of Heat and Mass Transfer, 2019, 140:269-280.

[11] [11] MA J, KONG F, KOVACEVIC R . Finite-element thermal analysis of laser welding of galvanized high-strength steel in a zero-gap lap joint configuration and its experimental verification［J］. Materials & design, 2012, 36(4): 348-358.

[12] [12] HUANG H J. Study on laser welding technology of automotive galvanized steel plate to reduce the influence of galvanized layer［C］//Proceedings of 2005 Annual Conference of Shanghai Laser Society. Shanghai: Shanghai Laser Society, 2005:4 (in Chinese) .

[13] [13] BLEY H, WEYAND L, LUFT A. An alternative approach for the cost-efficient laser welding of zinc-coated sheet metal［J］. CIRP Annals-Manufacturing Technology, 2007, 56(1):17-20.

[14] [14] HONG K M, SHIN Y C. Prospects of laser welding technology in the automotive industry: A review［J］. Journal of Materials Processing Technology, 2017, 245:46-69.

[15] [15] LU F, LU B, TANG X, et al. Study of influencing factors and joint performance of laser brazing on zinc-coated steel plate［J］. The International Journal of Advanced Manufacturing Technology, 2008, 37(9-10):961-965.

[16] [16] ZHANG Q, LI Sh Ch, JIN X Zh, et al. Research on key technology of laser welding of galvanized steel plate ［J］. Lasers & Optoelectronics Progress, 2010, 47(7):071401(in Chinese) .

[17] [17] CHEN Sh Q. Study on process rule and mechanism of laser welding of 304 stainless steel plate［D］.Guangzhou: Guangdong University of Technology, 2019: 54-59(in Chinese).

[18] [18] CHEN Zh Ch, YANG S L, WANG Ch M, et al. Study on zero-gap fiber laser lap welding of galvanized steel plate ［J］.Applied of Laser, 2013, 33(5): 498-504(in Chinese) .

[19] [19] HOU Y X, LUO Z Y, YI Y Y, et al. Study on weld forming and microstructure properties of A7N01 aluminum alloy by laser-MIG composite welding ［J］. Laser Technology, 2020, 44(3): 304-309(in Chinese) .

[20] [20] LIANG W, FENG B, ZHU G M, et al. Laser welding properties of 1800MPa hot formed steel and Cr340La low alloy high strength steel ［J］. Journal of Engineering Sciences, 2020, 42(6): 755-762(in Chinese).