[1] Zhang W H, Zhou H, Li S Y et al. Material-structure integrated design for high-performance aerospace thin-walled component[J]. Acta Aeronautica et Astronautica Sinica, 44, 627428(2023).

[2] Wang J, Liu Y S, Wang K et al. Progressive collapse behaviors and mechanisms of 3D printed thin-walled composite structures under multi-conditional loading[J]. Thin-Walled Structures, 171, 108810(2022).

[3] Xie C, Wang D F, Zong L et al. Multi-objective crashworthiness optimization of energy-absorbing box with gradient lattice structure[J]. Applied Mathematical Modelling, 121, 304-320(2023).

[4] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).

[5] Huo M Z, Chen J, Yang Q et al. Influence of rod diameter on dynamic vibration damping characteristics of NiTi alloy lattice structure fabricated by selective laser melting[J]. Chinese Journal of Lasers, 49, 1402305(2022).

[6] Pan C, Han Y F, Lu J P. Design and optimization of lattice structures: a review[J]. Applied Sciences, 10, 6374(2020).

[7] Liang J Y, Zhang W Y, Liu W et al. Laser additive manufacturing and heat transfer performance measurement of lattice structure heat exchanger[J]. Chinese Journal of Lasers, 50, 0402014(2023).

[8] Yang G, Cheng K B, Zhao S et al. Prediction and model establishment of inclined surface roughness of laser selective melting formed 316L stainless steel[J]. Chinese Journal of Lasers, 50, 2002301(2023).

[9] Xiang Z, Chen J, Yang Q et al. Energy absorption characteristics study of SLM NiTi bcc lattice structure[J]. Rare Metal Materials and Engineering, 51, 4279-4288(2022).

[10] Zhang M K, Yang Y Q, Wang D et al. Effect of heat treatment on the microstructure and mechanical properties of Ti6Al4V gradient structures manufactured by selective laser melting[J]. Materials Science and Engineering: A, 736, 288-297(2018).

[11] Zhao Z H, Chi Y L, Feng J L et al. Energy absorption characteristics of a novel CFCB lattice sandwich structure under out-of-plane compressive load[J]. Journal of Vibration and Shock, 42, 166-174(2023).

[12] Xu Y L, Cao X Y, Li T T et al. Compressive behavior and energy absorption of Ti6Al4V lattice structure fabricated by laser additive manufacturing[J]. Rare Metal Materials and Engineering, 51, 2536-2544(2022).

[13] Mishra A K, Chavan H, Kumar A. Effect of cell size and wall thickness on the compression performance of triply periodic minimal surface based AlSi10Mg lattice structures[J]. Thin-Walled Structures, 193, 111214(2023).

[14] Cheng S L, Wu L J, Sun S et al. Experiment and numerical simulation of dynamic mechanical properties of X-lattice sandwich structure under local impact[J]. Acta Materiae Compositae Sinica, 39, 3641-3651(2022).

[15] Xu X C, Gao J L, Hao Y B. Research on compressive performance of 304 stainless steel multi-layer gradient lattice and gradient rate influence[J]. Journal of Mechanical Strength, 45, 1318-1325(2023).

[17] Feng Q X. A study on the mechanical properties of metallic porous structures fabricated using selective laser melting and its variable-density design method[D](2017).

[18] Jia L, Li C F, Zou X T et al. Deformation and destruction of TC4 titanium alloy plate under the bird impact[J]. Chinese Journal of High Pressure Physics, 34, 59-68(2020).

[19] Deng Y F, Zhang Y, An J D et al. Mechanical properties and constitutive relationship of TC4 titanium alloy[J]. Journal of Vibration and Shock, 39, 70-77(2020).

[20] Wang M, Zhang L P, Zhao L Y et al. Comparative study on the microstructure and mechanical properties of the laser welded joints of additive manufactured and forged TC11 titanium alloy[J]. Transactions of the China Welding Institution, 44, 138-139(2023).

[21] Moridi A, Demir A G, Caprio L et al. Deformation and failure mechanisms of Ti-6Al-4V as built by selective laser melting[J]. Materials Science and Engineering: A, 768, 138456(2019).

[22] Lee J R, Lee M S, Yeon S M et al. Unravelling anisotropic deformation behaviour of Ti-6Al-4V ELI fabricated by powder bed fusion additive manufacturing[J]. Materials Characterization, 202, 113017(2023).

[23] He D, Zhu J C, Zaefferer S et al. Effect of retained beta layer on slip transmission in Ti-6Al-2Zr-1Mo-1V near alpha titanium alloy during tensile deformation at room temperature[J]. Materials & Design, 56, 937-942(2014).

[24] Wang K, Yan Z B, Zhou Y et al. Slip initiation in interlayered β and corresponding slip transfer during compression of a lamellar-structure titanium alloy[J]. Results in Physics, 18, 103276(2020).

[25] Dai J C, Min X H, Xin S W et al. Effect of interstitial element oxygen on cryogenic mechanical properties in β-type Ti-15Mo alloy[J/OL]. Acta Metallurgica Sinca, 1-11. http:∥kns.cnki.net/kcms/detail/21.1139.tg.20231129.1652.004.html

[26] Wang P, Yang F, Li P H et al. Design and additive manufacturing of a modified face-centered cubic lattice with enhanced energy absorption capability[J]. Extreme Mechanics Letters, 47, 101358(2021).

[27] Qiu X M, Zhang J, Yu T X. Collapse of periodic planar lattices under uniaxial compression, part II: dynamic crushing based on finite element simulation[J]. International Journal of Impact Engineering, 36, 1231-1241(2009).

[28] Liu Y S, Tan Q B, Lin H et al. Integrated design and additive manufacturing of lattice-filled multi-cell tubes[J]. Composites Science and Technology, 243, 110252(2023).

[29] Guo H W, Wang H Q, Li X M et al. Investigation of mechanical properties of laser powder bed fused AlSi10Mg lattice structures using GTN damage model[J]. Journal of Materials Research and Technology, 29, 1937-1948(2024).