Particle Behavior of in-situ Synthesized TaC in Laser Clad Coating

[2] [2] T. M. Yue, A. H. Wang, H. C. Man. Corrosion resistance enhancement of magnesium ZK60/SiC composite by NdYAG laser cladding［J］. Scripta Materialia, 1999, 40(3): 303～311

[3] [3] E. Fernandez, M. Cadenas, R. Gonzalez et al.. Wear behaviour of laser clad NiCrBSi coating［J］. Wear, 2005, 259(7-12): 870～875

[4] [4] Xu Ning, Zhang Qunli, Yao Jianhua. Microstructure of in-situ synthesis TiC hardened coating by laser irradiation［J］. Chinese J. Lasers, 2010, 37(10): 2653～2657

[5] [5] B. S. Du, Z. S. Zou, X. H. Wang et al.. Laser cladding of in situ TiB2/Fe composite coating on steel［J］. Appl. Surf. Sci., 2008, 254(20): 6489～6494

[6] [6] Lei Yiwen, Sun Ronglu, Tang Ying. Growth mechanism of in-situ synthesized TiC and TiB2 by laser cladding［J］. Chinese J. Lasers, 2009, 36(5): 1287～1291

[7] [7] X. H. Wang, M. Zhang, L. Cheng et al.. Microstructure and wear properties of in situ synthesized VC carbide reinforced Fe-based surface composite coating produced by laser cladding［J］. Tribology Lett., 2009, 34(3): 177～183

[8] [8] Chao Mingju, Zhang Xianhu, Yang Ning et al.. In situ synthesized VC-VB-B4C complex particulates reinforced Ni-based composite coating by laser cladding［J］ . Chinese J. Lasers, 2008, 35(11): 1723～1729

[9] [9] Wang Wenli, Chao Mingju, Wang Dongsheng et al.. Investigation on in-situ synthesis of TaC particulate reinforced Ni-based composite coatings by laser cladding［J］. Chinese J. Lasers, 2007, 34(2): 277～282

[10] [10] J. J. Yu, J. Zhang, F. Wang et al.. Microstructure evolution of Ni, Cr, Al-TaC in situ composite directionally solidified under a high temperature gradient［J］. Mater. Sci. Engng. A, 2001, 311(1-2): 200～204

[11] [11] E. Pagounis, M. Talvitie, V. K. Lindroos. Influence of reinforcement volume fraction and size on the microstructure and abrasion wear resistance of hot isostatic pressed white iron matrix composites［J］. Metallurgical and Materials Transactions A, 1996, A27(12): 4171～4181

[12] [12] O. N. Dogan, J. A. Hawk, J. H. Tylczak et al.. Wear of titanium carbide reinforced metal matrix composites［J］. Wear, 1999, 225: 758～769

[13] [13] K. Van Acker, D. Vanhoyweghen, R. Persoons et al.. Influence of tungsten carbide particle size and distribution on the wear resistance of laser clad WC/Ni coatings［J］. Wear, 2005, 258(1-4): 194～202

[14] [14] E. Pagounis, M. Talvitie, V. K. Lindroos. Influence of matrix structure on the abrasion wear resistance and toughness of a hot isostatic pressed white iron matrix composite［J］. Metallurgical and Materials Transactions A, 1996, 27(12): 4183～4191

[15] [15] Ihsan Barin. Thermochemical Data of Pure Substances ［M］. New York: VCH, 1995. 1593

[16] [16] Wu Chaofeng, Ma Mingxing, Liu Wenjin et al.. Study on wear resistance of laser caldding Fe-based composite coatings reinforced by in-situ multiple carbide particles［J］. Acta Metallurgica Sinica, 2009, 45(8): 1013～1018

[17] [17] Yan Zhiqiao, Xiong Xiang, Xiao Peng et al.. Conversion process of TaC by combination reaction of Ta with C［J］. Rare Metal Materials and Engineering, 2006, 35(s2): 209～212

[18] [18] Pei Yutao. Laser clad TICp/Ni alloy functionally gradient coating and its in-situ formation mechanism［J］. Acta Metallurgica Sinica, 1998, 34(9): 987～991

[19] [19] S. Yang, M. L. Zhong, W. J. Liu. TiC particulate composite coating produced in situ by laser cladding［J］. Mater. Sci. Engng. A, 2003, 343(1-2): 57～62

[20] [20] P. Wu, H. M. Du, X. L. Chen et al.. Influence of WC particle behavior on the wear resistance properties of Ni-WC composite coatings［J］. Wear, 2004, 257(1-2): 142～147

[21] [21] D. R. Uhlmann, B. Chalmers. Interaction between particles and a solid-liquid interface［J］. J. Appl. Phys., 1964, 35(10): 2986～2993

[22] [22] D. M. Stefanescu, B. K. Dhindaw, S. A. Kacar et al.. Behavior of ceramic particles at the solid-liquid metal interface in metal matrix composites［J］. Metallurgical Transactions A, 1988, 19(11): 2847～2855

[23] [23] G. F. Bolling, J. Cisse. Theory for interaction of particles with a solidifying front［J］. J. Crystal Growth, 1971, 10(1): 56～66

[24] [24] P. S. Mohanty, J. Mazumder. Solidification behavior and microstructural evolution during laser beam-material interaction［J］. Metallurgical and Materials Transactions B, 1998, 29(6): 1269～1279

[25] [25] D. Shangguan, S. Ahuja, D. M. Stefanescu. An analytical model for the interaction between an insoluble particle and an advancing solid liquid interface［J］. Metallurgical Transactions A, 1992, 23(2): 669～680

[26] [26] S. Yang, W. J. Liu, M. L. Zhong et al.. TiC reinforced composite coating produced by powder feeding laser cladding［J］. Mater. Lett., 2004, 58(24): 2958～2962

[27] [27] S. Atamert, Hkdh Bhadeshia. Comparison of the microstructures and abrasive wear properties of stellite hardfacing alloys deposited by arc-welding and laser cladding［J］. Metallurgical Transactions A, 1989, 20(6): 1037～1054

[28] [28] T. Laurila, K. J. Zeng, J. K. Kivilahti et al.. TaC as a diffusion barrier between Si and Cu［J］. J. Appl. Phys., 2002, 91(8): 5391～5399