Researching | Peridynamic Model for Selective Laser Melting with Gaussian Moving Heat Source

Chinese Journal of Lasers, Volume. 51, Issue 16, 1602303(2024)

Peridynamic Model for Selective Laser Melting with Gaussian Moving Heat Source

Kailiang Yang and Huaixue Li^*

Author Affiliations

National Key Laboratory of Power Beam Processing Technology, AVIC Manufacturing Technology Institute, Beijing 100024, China

show less

Abstract Get PDF(in Chinese)

Figures&Tables (24)

References (46)

Paper Information

References(46)

[1] Bourell D, Frazier W, Kuhn H et al[M]. ASM handbook: additive manufacturing processes(2020).

[2] Yadroitsev I, Yadroitsava I, Du Plessis A. Basics of laser powder bed fusion[M]. Fundamentals of laser powder bed fusion of metals, 15-38(2021).

[3] Careri F, Khan R H U, Todd C et al. Additive manufacturing of heat exchangers in aerospace applications: a review[J]. Applied Thermal Engineering, 235, 121387(2023).

[4] Altıparmak S C, Xiao B W. A market assessment of additive manufacturing potential for the aerospace industry[J]. Journal of Manufacturing Processes, 68, 728-738(2021).

[5] Awad A, Goyanes A, Basit A W et al. A review of state-of-the-art on enabling additive manufacturing processes for precision medicine[J]. Journal of Manufacturing Science and Engineering, 145, 010802(2023).

[6] Zhao N Z, Parthasarathy M, Patil S et al. Direct additive manufacturing of metal parts for automotive applications[J]. Journal of Manufacturing Systems, 68, 368-375(2023).

[7] Mu Y B, Chu Y Q, Pan L M et al. 3D printing critical materials for rechargeable batteries: from materials, design and optimization strategies to applications[J]. International Journal of Extreme Manufacturing, 5, 042008(2023).

[8] Cooke S, Ahmadi K, Willerth S et al. Metal additive manufacturing: technology, metallurgy and modelling[J]. Journal of Manufacturing Processes, 57, 978-1003(2020).

[9] Ishfaq K, Khan M D A, Khan M A A et al. A correlation among industry 4.0, additive manufacturing, and topology optimization: a state-of-the-art review[J]. The International Journal of Advanced Manufacturing Technology, 129, 3771-3797(2023).

[10] Papazoglou E L, Karkalos N E, Karmiris-Obratański P et al. On the modeling and simulation of SLM and SLS for metal and polymer powders: a review[J]. Archives of Computational Methods in Engineering, 29, 941-973(2022).

[11] Becker T H, Kumar P, Ramamurty U. Fracture and fatigue in additively manufactured metals[J]. Acta Materialia, 219, 117240(2021).

[12] Yang G, Xie Y L, Zhao S et al. Quality control: internal defects formation mechanism of selective laser melting based on laser-powder-melt pool interaction: a review[J]. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 1, 100037(2022).

[13] Gouge M, Michaleris P[M]. Thermo-mechanical modeling of additive manufacturing(2017).

[14] Bayat M, Dong W, Thorborg J et al. A review of multi-scale and multi-physics simulations of metal additive manufacturing processes with focus on modeling strategies[J]. Additive Manufacturing, 47, 102278(2021).

[15] Wei H L, Mukherjee T, Zhang W et al. Mechanistic models for additive manufacturing of metallic components[J]. Progress in Materials Science, 116, 100703(2021).

[16] Yang G, Li Y H, Zhou S Y et al. Thermal-mechanical coupling of regional scanning based on characteristic regions in laser additive manufacturing[J]. Chinese Journal of Lasers, 48, 1002115(2021).

[17] Xie R D, Zhu J W, Zhang H et al. Review of detection, analysis and control of temperature field in laser additive manufacturing[J]. Laser & Optoelectronics Progress, 57, 050003(2020).

[18] Yin Q Y, Wei H L, Zhang C C et al. Effect prediction of stress and deformation for laser additive manufacturing of characteristic structure based on inherent strain method[J]. Chinese Journal of Lasers, 49, 1402207(2022).

[19] Chen F, Yan W T. High-fidelity modelling of thermal stress for additive manufacturing by linking thermal-fluid and mechanical models[J]. Materials & Design, 196, 109185(2020).

[20] Jeong S H, Park E G, Kang J W et al. Thermal analysis for simulation of metal additive manufacturing process considering temperature- and history-dependent material properties[J]. International Journal of Aeronautical and Space Sciences, 22, 52-63(2021).

[21] Dong W, Liang X, Chen Q et al. A new procedure for implementing the modified inherent strain method with improved accuracy in predicting both residual stress and deformation for laser powder bed fusion[J]. Additive Manufacturing, 47, 102345(2021).

[22] Soundararajan B, Sofia D, Barletta D et al. Review on modeling techniques for powder bed fusion processes based on physical principles[J]. Additive Manufacturing, 47, 102336(2021).

[23] Madenci E, Oterkus E[M]. Peridynamic theory and its applications(2014).

[24] Silling S A. Reformulation of elasticity theory for discontinuities and long-range forces[J]. Journal of the Mechanics and Physics of Solids, 48, 175-209(2000).

[25] Silling S A, Askari E. A meshfree method based on the peridynamic model of solid mechanics[J]. Computers & Structures, 83, 1526-1535(2005).

[26] Foster J T, Silling S A, Chen W W. State based peridynamic modeling of dynamic fracture[C], 2312-2317(2009).

[27] Silling S A, Lehoucq R B. Peridynamic theory of solid mechanics[J]. Advances in Applied Mechanics, 44, 73-168(2010).

[28] Kilic B, Agwai A, Madenci E. Peridynamic theory for progressive damage prediction in center-cracked composite laminates[J]. Composite Structures, 90, 141-151(2009).

[29] Oterkus S, Madenci E, Agwai A. Peridynamic thermal diffusion[J]. Journal of Computational Physics, 265, 71-96(2014).

[30] Oterkus S, Madenci E, Agwai A. Fully coupled peridynamic thermomechanics[J]. Journal of the Mechanics and Physics of Solids, 64, 1-23(2014).

[31] Liu S, Fang G D, Wang B et al. Study of thermal conduction problem using coupled peridynamics and finite element method[J]. Chinese Journal of Theoretical and Applied Mechanics, 50, 339-348(2018).

[32] Nguyen C T, Oterkus S. Peridynamics for the thermomechanical behavior of shell structures[J]. Engineering Fracture Mechanics, 219, 106623(2019).

[33] Huang D, Zhang Q, Qiao P Z et al. A review on peridynamics (PD) method and its applications[J]. Advances in Mechanics, 40, 448-459(2010).

[34] Oterkus E, Oterkus S, Madenci E[M]. Peridynamic modeling, numerical techniques, and applications(2021).

[35] Verlet L. Computer experiments on classical fluids. I. Thermodynamical properties of lennard-jones molecules[J]. Physical Review, 159, 98-103(1967).

[36] Swope W C, Andersen H C, Berens P H et al. A computer simulation method for the calculation of equilibrium constants for the formation of physical clusters of molecules: application to small water clusters[J]. The Journal of Chemical Physics, 76, 637-649(1982).

[37] Frenkel D, Smit B[M]. Understanding molecular simulation: from algorithms to applications(2023).

[38] Beeman D. Some multistep methods for use in molecular dynamics calculations[J]. Journal of Computational Physics, 20, 130-139(1976).

[39] Rahman A. Correlations in the motion of atoms in liquid argon[J]. Physical Review, 136, 405-411(1964).

[40] Rapaport D C[M]. The art of molecular dynamics simulation(2004).

[41] Goldak J, Chakravarti A, Bibby M. A new finite element model for welding heat sources[J]. Metallurgical Transactions B, 15, 299-305(1984).

[42] Al Hamahmy M I, Deiab I. Review and analysis of heat source models for additive manufacturing[J]. The International Journal of Advanced Manufacturing Technology, 106, 1223-1238(2020).

[43] Tolochko N K, Arshinov M K, Gusarov A V et al. Mechanisms of selective laser sintering and heat transfer in Ti powder[J]. Rapid Prototyping Journal, 9, 314-326(2003).

[44] Wang B Q, Oterkus S, Oterkus E. Thermomechanical phase change peridynamic model for welding analysis[J]. Engineering Analysis with Boundary Elements, 140, 371-385(2022).

[45] Dao M H, Lou J. Simulations of laser assisted additive manufacturing by smoothed particle hydrodynamics[J]. Computer Methods in Applied Mechanics and Engineering, 373, 113491(2021).

[46] Bergman T L, Incropera F P[M]. Fundamentals of heat and mass transfer(2011).

Tools

Get Citation

Copy Citation Text

Kailiang Yang, Huaixue Li. Peridynamic Model for Selective Laser Melting with Gaussian Moving Heat Source[J]. Chinese Journal of Lasers, 2024, 51(16): 1602303

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: Laser Additive Manufacturing

Received: Sep. 14, 2023

Accepted: Dec. 27, 2023

Published Online: Jul. 26, 2024

The Author Email: Li Huaixue (lhx1022@126.com)

DOI:10.3788/CJL231204

CSTR:32183.14.CJL231204

Topics

laser devices and laser physics

Lasers and Laser Optics

laser manufacturing

Instrumentation, Measurement and Metrology