[2] [2] REN X Y, ZENG G M, TANG L, et al. Effect of exogenous carbonaceous materials on the bioavailability of organic pollutants and their ecological risks[J]. Soil Biol Biochem, 2018, 116: 70-81.

[3] [3] YU Y L, LI Y Y, LIAO Y M, et al. Preparation of phenol-formaldehyde composite modified with chitosan for the simultaneous removal of antibiotics and heavy metal ions in waters[J]. Int J Biol Macromol, 2024, 281(P4): 136467.

[4] [4] CHAITHRA K P, VARGHESE A, VINOD T P, et al. Multifunctional electrospun membranes incorporated with metal oxide nanoparticles, cellulose acetate, and polyvinylpyrrolidone for wastewater treatment: Oil/water separation, dye adsorption, and dye degradation[J]. Chem Eng J, 2024, 499: 156049.

[5] [5] MUNIR T, ZHOU J W, LIU M, et al. Comparison between synthetic and natural clinoptilolites for adsorptive removal of metal ions[J]. Mater Chem Phys, 2024, 325: 129768.

[6] [6] DAVIDOVITS J. Geopolymers and geopolymeric materials[J]. J Therm Anal, 1989, 35(2): 429-441.

[9] [9] LI Z W, DU P, ZHOU Y M, et al. Synchronous hot-pressed metakaolin-fly ash based geopolymer: Compressive strength and hydration products[J]. J Build Eng, 2024, 97: 110997.

[10] [10] LEI S J, GAO H, FENG R L, et al. Effect of calcination temperature on the activity of basalt tailings for the lightweight geopolymer from microwave curing[J]. Mater Chem Phys, 2024, 328: 129991.

[14] [14] JI Z H, PEI Y S. Immobilization efficiency and mechanism of metal cations (Cd2+, Pb2+ and Zn2+) and anions (AsO43- and Cr2O72-) in wastes-based geopolymer[J]. J Hazard Mater, 2020, 384: 121290.

[15] [15] SARKAR C, BASU J K, SAMANTA A N. Removal of Ni2+ ion from waste water by geopolymeric adsorbent derived from LD Slag[J]. J Water Process Eng, 2017, 17: 237-244.

[16] [16] CHEN Y L, TONG Y Y, PAN R W, et al. The research on adsorption behaviors and mechanisms of geopolymers on Sr2+, Co2+ and Cs+[J]. Adv Mater Res, 2013, 704: 313-318.

[19] [19] LIU J G, FENG J Y, WANG Z H, et al. Steel slag base geopolymer for efficient removal of Zn and Ni ions from aqueous solutions: Preparation and characterization[J]. Mater Lett, 2023, 340: 134173.

[20] [20] JIN H Z, ZHANG Y Y, WANG Q K, et al. Rapid removal of methylene blue and nickel ions and adsorption/desorption mechanism based on geopolymer adsorbent[J]. Colloid Interface Sci Commun, 2021, 45: 100551.

[21] [21] TANG Q, WANG K T, YASEEN M, et al. Synthesis of highly efficient porous inorganic polymer microspheres for the adsorptive removal of Pb2+ from wastewater[J]. J Clean Prod, 2018, 193: 351-362.

[22] [22] YAN S, FENG X, HUANG K, et al. Synthesis and adsorption performance of fly ash/steel slag-based geopolymer for removal of Cu (II) and methylene blue[J]. Int J Appl Ceram Technol, 2023, 20(3): 1591-1605.

[23] [23] ZHOU Z, XU Z H, FENG Q J, et al. Effect of pyrolysis condition on the adsorption mechanism of lead, cadmium and copper on tobacco stem biochar[J]. J Clean Prod, 2018, 187: 996-1005.

[25] [25] LIU C L, WANG W, WANG N, et al. Synthesis of cubic mesoporous silica SBA16 functionalized with carboxylic acid in a one-pot process for efficient removal of wastewater containing Cu2+: Adsorption isotherms, kinetics, and thermodynamics[J]. Microporous Mesoporous Mater, 2025, 382: 113402.

[26] [26] ZHOU C K, GUO Y, XU X, et al. Multifactor orthogonal analysis on the desorption performances of P/N/S-doped activated carbon for acetone[J]. J Environ Chem Eng, 2024, 12(3): 113065.

[28] [28] OBIKE A, IGWE J, EMERUWA C, et al. Diffusion-chemisorption and pseudo-second order kinetic models for heavy metal removal from aqueous solutions using modified and unmodified oil palm fruit fibre[J]. Chem Sci Int J, 2018, 23(1): 1-13.

[29] [29] BASKARAN D, MIRIYAM I B, PALANI R, et al. Effectiveness of Musa balbisiana bract toward chromium removal from industrial tannery effluent: Optimization, kinetics, isotherms, regeneration, and cost estimation[J]. Biochem Eng J, 2025, 213: 109565.

[30] [30] SARKAR C, BASU J K, SAMANTA A N. Synthesis of mesoporous geopolymeric powder from LD slag as superior adsorbent for Zinc (II) removal[J]. Adv Powder Technol, 2018, 29(5): 1142-1152.