[1] [1] Latkowski J F. Chamber design for the laser inertial fusion energy (LIFE) engine[J]. Fusion Science and Technology, 2011, 60(1): 54- 60.

[2] [2] Eder D C, Anderson A T, Braun D G, et al.. Ablation of NIF targets and diagnostic components by high-power lasers and X rays from high-temperature plasmas[C]. High Power Laser Ablation, International Society for Optics and Photonics, 2000: 86-96.

[3] [3] Anderson A T, Peterson P F. Experimental methods for measuring X-ray ablation response of surfaces[J]. Experimental Heat Transfer an International Journal, 1997, 10(1): 51-65.

[4] [4] Schirmann D, Bianchi L, Courchinoux R, et al.. LMJ target area design and engineering physics inside the LMJ target chamber[C]. Third International Conference on Solid State Lasers for Application to Inertial Confinement Fusion, International Society for Optics and Photonics, 1999: 710-717.

[5] [5] Marshall C D, Speth J A, Deloach L D, et al.. Penetrating radiation impact on NIF final optic components[C]. Second International Conference on Solid State Lasers for Application to ICF, International Society for Optics and Photonics, 1997: 343-363.

[6] [6] Xie J, Kar A, Rothenflue J A, et al.. Comparative studies of metal cutting with high-power lasers[C]. XI International Symposium on Gas Flow and Chemical Lasers and High Power Laser Conference, International Society for Optics and Photonics, 1997: 764-767.

[7] [7] Xie J, Kar A, Rothenflue J A, et al.. Temperature-dependent absorptivity and cutting capability of CO2, Nd∶YAG and chemical oxygeniodine lasers[J]. Journal of Laser Applications, 1997, 9(2): 77-85.

[8] [8] Abdellaoui N, Pillonnet A, Berndt J, et al.. Growth process of nanosized aluminum thin films by pulsed laser deposition for fluorescence enhancement[J]. Nanotechnology, 2015, 26(11): 115604.

[9] [9] Gao Xun, Shao Yan, Du Chuang, et al.. Pre-ablation laser parameters efffect on the spectral enhancement of double pulsed laser induced breakdown spectroscopy[J]. Chinese J Lasers, 2013, 40(8): 0815003.

[10] [10] Kumar B, Thareja R K. Synthesis of nanoparticles in laser ablation of aluminum in liquid[J]. Journal of Applied Physics, 2010, 108(6): 064906.

[11] [11] Chang Hao, Jin Xing, Chen Zhaoyang. Study on optical and thermopysical properties of aluminum under nanosecond laser irradiation[J]. Acta Optica Sinica, 2013, 33(11): 1114002.

[12] [12] Zhang Pengbo, Qin Ying. Two-dimensional numerical simulation of laser-ablation of aluminum material by nanosecond laser pulse[J]. Acta Physica Sinica, 2010, 59(10): 7121-7126.

[13] [13] Mahdieh M H, Nikbakht M, Moghadam Z E, et al.. Crater geometry characterization of Al targets irradiated by single pulse and pulse trains of Nd∶YAG laser in ambient air and water[J]. Applied Surface Science, 2010, 256(6): 1778-1783.

[14] [14] Porneala C, Willis D A. Observation of nanosecond laser-induced phase explosion in aluminum[J]. Applied physics letters, 2006, 89(21): 211121.

[15] [15] Stafe M, Vladoiu I, Popescu I. Impact of the lasr wavelength and fluence on the ablation rate of aluminium[J]. Open Physics, 2008, 6(2): 327-331.

[16] [16] Fang K F. Handbook of Engineering Materials[M]. Beijing: Beijing Publishing House, 2002: 580-585.

[17] [17] Jafarabadi M A, Mahdieh M H. Investigation of phase explosion in aluminum induced by nanosecond double pulse technique[J]. Applied Surface Science, 2015, 346: 263-269.

[18] [18] Bulgakova N M, Bulgakov A V. Pulsed laser ablation of solids: Transition from normal vaporization to phase explosion[J]. Applied Physics A, 2001, 73(2): 199-208.

[19] [19] Kelly R, Miotello A. Comments on explosive mechanisms of laser sputtering[J]. Applied Surface Science, 1996, 96: 205-215.

[20] [20] Fishburn J M, Withford M J, Coutts D W, et al.. Method for determination of the volume of material ejected as molten droplets during visible nanosecond ablation[J]. Applied Optics, 2004, 43(35): 6473-6476.

[21] [21] Zhang J Q. Analytic research of laser-generated plasma parameters[J]. Chinese J Lasers, 1995, B4(4): 323, 332-342.