[1] X JIANG, R KOIKE. Effects of high gravity on properties of parts fabricated using material extrusion system by additive manufacturing. Heliyon, 10(2024).

[2] O V D S MANUEL, P MARKO, C LUCA et al. Closing the loop in space 3D printing：effect of vacuum，recycling，and UV aging on high performance thermoplastics produced via filament extrusion additive manufacturing. Acta Astronautica, 219, 164-176(2024).

[3] J GINÉS-PALOMARES, M FATERI, E KALHÖFER et al. Laser melting manufacturing of large elements of lunar regolith simulant for paving on the moon. Scientific Reports, 13, 263965095(2023).

[4] C NEUMANN, J THORE, M CLOZEL et al. Additive manufacturing of metallic glass from powder in space. https：//doi.org/10.1038/s41526-023-00327-7

[5] N D TRANI, A MASINI, T BO et al. Probing physicochemical performances of 3D printed carbon fiber composites during 8-month exposure to space environment. Advanced Functional Materials, 34, 2310243(2023).

[6] X JIANG, R KOIKE. High gravity material extrusion system and extruded polylactic acid performance enhancement. Scientific Reports, 13, 14224(2023).

[7] A ZOCCA, J LÜCHTENBORG, T MÜHLER et al. Enabling the 3D printing of metal components in µ-gravity. Advanced Materials Technologies, 4, 1900506(2019).

[8] H J O'CONNOR, D P DOWLING. Low-pressure additive manufacturing of continuous fiber-reinforced polymer composites. Polymer Composites, 40, 4329-4339(2019).

[9] T PRATER, N WERKHEISER, F LEDBETTER et al. 3D printing in zero G technology demonstration mission：complete experimental results and summary of related material modeling efforts. The International Journal of Advanced Manufacturing Technology, 101, 391-417(2019).

[10] A ZOCCA, J WILBIG, A WASKE et al. Challenges in the technology development for additive manufacturing in space. Chinese Journal of Mechanical Engineering：Additive Manufacturing Frontiers, 1, 100018(2022).

[12] I J CUSHING, L R MUHLBAUER, P R HOYT et al. Building a sustainable in-space manufacturing ecosystem：positrusion and CRISSP(2016).

[13] V D S M ORTEGA, M PISKACEV, L CELOTTI et al. Closing the loop in space 3D printing：effect of vacuum，recycling，and UV aging on high performance thermoplastics produced via filament extrusion additive manufacturing. Acta Astronaut, 219, 164-176(2024).

[14] C YANG, X TIAN, T LIU et al. 3D printing for continuous fiber reinforced thermoplastic composites：mechanism and performance. Rapid Prototyping, 23, 209-215(2017).

[15] X TIAN, T LIU, C YANG et al. Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites. Composites Part A：Applied Science and Manufacturing, 88, 198-205(2016).

[17] Z GUO, Z HOU, X TIAN et al. 3D printing of curvilinear fiber reinforced variable stiffness composite structures：a review. Composites Part B：Engineering, 291, 112039(2025).

[18] Y HUANG, X TIAN, W LI et al. 3D printing of topologically optimized wing spar with continuous carbon fiber reinforced composites. Composites Part B：Engineering, 272, 111166(2024).

[19] Z GUO, Z HOU, X TIAN et al. Optimization design and 3D printing of curvilinear fiber reinforced variable stiffness composites based on polar coordinate sweeping. Addit Manuf, 88, 104272(2024).

[20] Z HOU, P LIU, X TIAN et al. Hybrid effect of 3D-printed coaxial continuous hybrid fibre-reinforced composites. Thin Wall Struct, 188, 110820(2023).

[21] Y HUANG, X TIAN, L WU et al. Progressive concurrent topological optimization with variable fiber orientation and content for 3D printed continuous fiber reinforced polymer composites. Composites Part B：Engineering, 255, 110602(2023).

[22] Y HUANG, X TIAN, Z ZHENG et al. Multiscale concurrent design and 3D printing of continuous fiber reinforced thermoplastic composites with optimized fiber trajectory and topological structure. Compos Struct, 285, 115241(2022).

[23] K Y LIN, X F MA, Z CUI et al. Electrical property of 3D printed continuous fiber reinforced thermoplastic composite mesh reflecting surfaces. https：//onlinelibrary.wiley.com/doi/10.1155/2022/5424839

[26] X TIAN, T LIU, Q WANG et al. Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites. Journal of Cleaner Production, 142, 1609-1618(2017).

[27] M ZHANG, X TIAN, L JIA et al. Mechanism and performance of thermal radiation recycling for in-space 3D printed continuous carbon fibre-reinforced PEEK composites. Virtual and Physical Prototyping, 19(2024).

[29] M ZHANG, X TIAN, T LIU et al. Thermal degradation and performance evolution mechanism of fully recyclable 3D printed continuous fiber self-reinforced composites. Sustain Mater Techno, 37(2023).