[1] [1] Wang J, Zou H, Li C, et al. The effect of microstructural evolution on hardening behavior of type 17-4PH stainless steel in long-term aging at 350 ℃［J］. Materials Characterization, 2006, 57(4): 274-280.

[2] [2] Raj S V, Ghosn L J, Lerch B A, et al. Mechanical properties of 17-4PH stainless steel foam panels［J］. Materials Science and Engineering: A, 2007, 456(1): 305-316.

[3] [3] Liu Zhijiang, Liu Xiangmin, Li Lianxiang. Erosion damage of last stage long blade of large steam turbine in China in recent years［J］. Power Engineering, 2003, 23(1): 2201-2204.

[4] [4] Shepeleva L, Medres B, Kaplan W D, et al. Laser induced Cu/alumina bonding: Microstructure and bond mechanism［J］. Surface and Coatings Technology, 2000, 125(1): 40-44.

[5] [5] Oakley S Y, Nowell D. Prediction of the combined high-and low-cycle fatigue performance of gas turbine blades after foreign object damage［J］. International Journal of Fatigue, 2007, 29(1): 69-80.

[6] [6] Zhu Beidi, Zhang Zhidong. Study on laser cladding of last stage blades of steam turbine［J］. Chinese J Lasers, 1994, 21(6): 526-529.

[7] [7] Wang Dongsheng, Tian Zongjun, Shen Lida, et al. Research status and development of laser cladding technology［J］. Application Laser, 2012, 32(6): 538-544.

[8] [8] Li Yangliang, Jin Haixia, Bai Xiaobo, et al. Research status and development trend of laser cladding technology［J］. Heat Treatment Technology and Equipment, 2009, 30(4): 1-5.

[9] [9] Qiao Y F, Fischer T E, Dent A. The effects of fuel chemistry and feedstock powder structure on the mechanical and tribological properties of HVOF thermal-sprayed WC-Co coatings with very fine structures［J］. Surface and Coatings Technology, 2003, 172(1): 24-41.

[10] [10] D′Oliveira A S C, da Silva P S C, Vilar R M. Microstructural features of consecutive layers of Stellite 6 deposited by laser cladding［J］. Surface and Coatings Technology, 2002, 153(2): 203-209.

[11] [11] Duan Xiaoxi, Gao Shiyou, Gu Yongfei, et al. Study on reinforcement mechanism and frictional wear properties of 316L-SiC mixed layer deposited by laser cladding［J］. Chinese J Lasers, 2016, 43(1): 0103004.

[12] [12] Xu Jintao, Li An, Liu Dong, et al. Research on corrosion resistance and wear resistance of laser cladding Cr3Si/γ multi-phase coating［J］. Chinese J Lasers, 2016, 43(3): 0303006.

[13] [13] Qin Chengpeng, Zheng Yugui. Cavitation erosion behavior of a laser clad Co-based alloy on 17-4PH stainless steel［J］. Corrosion Science and Protection Technology, 2011, 23(3): 209-213.

[14] [14] Yang Yuling, Dong Danyang. Laser surface modification technology and application of Materials［M］. Beijing: Chemical Industry Press, 2013: 72-76.

[15] [15] Wang Zhihui, Wang Huaming, Liu Dong. Microstructure and mechanical properties of AF1410 ultra-high strength steel using laser additive manufacture technique［J］. Chinese J Lasers, 2016, 43(4): 0403001.

[16] [16] Gholipour A, Shamanian M, Ashrafizadeh F. Microstructure and wear behavior of stellite6 cladding on 17-4PH stainless steel［J］. Journal of Alloy and Compounds, 2011, 509(14): 4905-4909.

[17] [17] Wang Mingyu. Study on the microstructure and fatigue properties of B2 mould steel laser cladding layer［D］. Changchun: Jilin University, 2015: 25-26.

[18] [18] Woodford D A. Cavitation-erosion-lnduced phase transformations in alloys［J］. Metallurgical Transactions, 1972, 3(5): 1137-1145.