[1] [1] HU Y, GUO L C, MAIORINO M, et al. Comparison of wear and rolling contact fatigue behaviours of bainitic and pearlitic rails under various rolling-sliding conditions［J］. Wear, 2020, 460-461: 203455.

[2] [2] ZHAO J Z, MIAO H C, KAN Q H, et al. Numerical investigation on the rolling contact wear and fatigue of laser dispersed quenched U71Mn rail［J］. International Journal of Fatigue, 2021, 143: 106010.

[3] [3] PAN J Z, CHEN L, LIU C P, et al. Relationship between the microstructural evolution and wear behavior of U71Mn rail steel［J］. Journal of Materials Engineering and Performance, 2021, 30(2): 1090-1098.

[6] [6] THAWARI N, GULLIPALLI C, KATIYAR J K, et al. Effect of multi-layer laser cladding of Stellite6 and Inconel 718 materials on clad geometry, microstructure evolution and mechanical properties［J］. Materials Today Communications, 2021, 28: 102604.

[7] [7] YIN X Y, LIANG J, GAO Y F, et al. Effects of LaB6 on the high-temperature oxidation behavior of TiC+TiBx reinforced titanium matrix composite coatings fabricated by laser cladding［J］. Surface and Coatings Technology, 2021, 421: 127445.

[8] [8] LIU X B, BI J Z, MENG Z Y, et al. Tribological behaviors of high-hardness Co-based amorphous coatings fabricated by laser cladding［J］. Tribology International, 2021, 162: 107142.

[9] [9] XIAO Q, SUN W L, YANG K X, et al. Wear mechanisms and micro-evaluation on WC particles investigation of WC-Fe composite coatings fabricated by laser cladding［J］. Surface and Coatings Technology, 2021, 420: 127341.

[10] [10] WANG C, LI J J, WANG T, et al. Microstructure and properties of pure titanium coating on Ti-6Al-4V alloy by laser cladding［J］. Surface and Coatings Technology, 2021, 416: 127137.

[12] [12] LI W, XU P Q, WANG Y Y, et al. Laser synthesis and microstructure of micro-and nano-structured WC reinforced Co-based cladding layers on titanium alloy［J］. Journal of Alloys and Compounds, 2018, 749: 10-22.

[13] [13] CHEN L Y, ZHAO Y, CHEN X, et al. Repair of spline shaft by laser-cladding coarse TiC reinforced Ni-based coating: Process, microstructure and properties［J］. Ceramics International, 2021, 47(21): 30113-30128.

[15] [15] WANG L X, YANG L J, HUANG Y M, et al. Effects of Y2O3 addition on the microstructure and wear-resistant performance of TiN/TiB-reinforced Ti-based laser-clad coatings on Ti-6Al-4V alloys［J］. Materials Today Communications, 2021, 29: 102752.

[24] [24] CAO S L, LIANG J, WANG L Q, et al. Effects of NiCr intermediate layer on microstructure and tribological property of laser cladding Cr3C2 reinforced Ni60A-Ag composite coating on copper alloy［J］. Optics & Laser Technology, 2021, 142: 106963.

[25] [25] LIU Y F, ZHUANG S G, LIU X B, et al. Microstructure evolution and high-temperature tribological behavior of Ti3SiC2 reinforced Ni60 composite coatings on 304 stainless steel by laser cladding［J］. Surface and Coatings Technology, 2021, 420: 127335.

[26] [26] SHI X Y, WEN D S, WANG S R, et al. Investigation on friction and wear performance of laser cladding Ni-based alloy coating on brake disc［J］. Optik, 2021, 242: 167227.

[27] [27] SHU F Y, WANG B, ZHANG S X, et al. Microstructure, high-temperature wear resistance, and corrosion resistance of laser cladded Co-based coating［J］.Journal of Materials Engineering and Performance, 2021, 30(5): 3370-3380.