[1] Zhang X, Li X, Xu W P et al. Experimental investigation of the failure of conical picks under thermal and abrasive effects[J]. Engineering Failure Analysis, 156, 107737(2024).

[2] Prokopenko S, Li A, Kurzina I et al. Improved operating performance of mining machine picks[J]. IOP Conference Series: Materials Science and Engineering, 142, 012115(2016).

[3] Liu S Y, Ji H F, Liu X H et al. Experimental research on wear of conical pick interacting with coal-rock[J]. Engineering Failure Analysis, 74, 172-187(2017).

[4] Eshaghian O, Hoseinie S H, Maleki A. Multi-attribute failure analysis of coal cutting picks on longwall shearer machine[J]. Engineering Failure Analysis, 120, 105069(2021).

[5] Kumar C, Kumaraswamidhas L A, Murthy V M S R et al. Experimental investigations on thermal behavior during pick-rock interaction and optimization of operating parameters of surface miner[J]. International Journal of Rock Mechanics and Mining Sciences, 133, 104360(2020).

[6] Eshaghian O, Hoseinie S H, Jazi H S. Effects of Ni-based composite coatings on failure mechanism and wear resistance of cutting picks on coal shearer machine[J]. Engineering Failure Analysis, 151, 107342(2023).

[7] Liu D G, Liang G X, Hao X H et al. Properties of laser cladded coating on pick with different content of WC particles[J]. Surface Technology, 52, 408-419(2023).

[8] Luo L B, Liang G X, Liu D G et al. Microstructure and properties of laser cladding co-based diamond wear resistant layer on 42CrMo steel surface[J]. Surface Technology, 53, 96-107(2024).

[9] Chen H, Yang J G, Li H Q. Microstructure and properties of Fe-based coatings on cutting pick surface formed by plasma jet surface metallurgy[J]. Transactions of Nonferrous Metals Society of China, 19, s583-s586(2009).

[10] Akintunde I B, Lindsay E E, Olakanmi E O et al. Performance evaluation and failure analysis of conical picks used in a Botswana (Ngwato) mine[J]. Engineering Failure Analysis, 143, 106872(2023).

[11] Kim E, Hirro K, Oliveira D et al. Effects of the skew angle of conical bits on bit temperature, bit wear, and rock cutting performance[J]. International Journal of Rock Mechanics and Mining Sciences, 100, 263-268(2017).

[12] Sun Y, Li X S, Harbers C et al. Wear and cutting temperature of thermally stable diamond composite tipped pick in hard rock cutting[J]. Wear, 523, 204848(2023).

[13] Jin L, Shi S H, Wei C et al. Influence of substrate irradiation proportion on stability of laser coaxial wire-melting deposition[J]. Acta Optica Sinica, 43, 0414003(2023).

[14] Cai C, Zhang P, Xie S et al. Rock breakage and temperature variation of naturally worn PDC tooth during cutting of hard rock and soft rock[J]. Geoenergy Science and Engineering, 229, 212042(2023).

[15] Saeed A, Khan Z A, Hadfield M et al. Material characterization and real-time wear evaluation of pistons and cylinder liners of the tiger 131 military tank[J]. Tribology Transactions, 56, 637-644(2013).

[16] Zhang J M, Jia L, Xing Z G et al. Surface failure and repair technology of current-carrying sliding friction components[J]. Tribology, 44, 696-714(2024).