[1] [1] CHEN G Y, JIANG D Y, WANG B, et al. Research on deformation control of ultrasonic-assisted laser welding of 6061 aluminum alloy［J］. Laser Technology, 2021, 45(5):541-547(in Chinese).

[2] [2] WANG H P, YANG X Y, CHEN H, et al. Micro-area organization and performance of 130mm Al alloy scanning laser filler wire welded joint［J］.Transactions of the China Welding Institution, 2019, 40(11): 87-92 (in Chinese) .

[3] [3] XIONG Q. Study on interface structure and fatigue damage of dissimilar welding joints of 6061 aluminum/DP980 galvanized steel［D］. Shanghai: Shanghai University of Engineering Science, 2019: 65-66 (in Chinese) .

[4] [4] ZHOU D, LI C, YI X, et al. Influence of wire feeding speed on properties of laser weld brazed joints of properties of laser weld-brazed joints of aluminum/steel［J］. Welding & Joining, 2019, 63(3): 38-43 (in Chinese) .

[5] [5] DUAN Y H, ZHAO Y, FU J, et al. Microstructure and properties of narrow gap joint of S32205 duplex stainless steel pipe by laser welding with filler wire［J］. Welding Technology, 2020, 49(6): 8-12 (in Chinese) .

[6] [6] LI M W. Research on welding characteristics of 6005A aluminum alloy laser filler wire welding［D］. Harbin: Harbin Institute of Technology, 2019: 89-90 (in Chinese) .

[7] [7] FENG Sh. Research on welding characteristics of 6082 aluminum alloy laser filler wire welding［D］. Harbin: Harbin Institute of Technology, 2018: 70-71 (in Chinese) .

[8] [8] MENG Sh H, GONG J F, ZOU J P, et al. Analysis of melting characteristics of welding wires for aluminum alloy dual-beam laser filler wire welding［J］. Aerospace Shanghai,2020, 37(3): 51-60 (in Chinese) .

[9] [9] HUANG W B, CHEN S J, XIAO J, et al. Investigation of filler wire melting and transfer behaviors in laser welding with filer wire［J］. Optics and Laser Technology, 2021, 134: 106589.

[10] [10] TAO W, YANG Z B, CHEN Y B, et al. Double-sided fiber laser beam welding process of T-joints for aluminum aircraft fuselage panels: Filler wire melting behavior, process stability, and their effects on porosity defects［J］. Optics & Laser Technology, 2013, 52: 1-9.

[11] [11] GONG J F. Research on the characteristics of dual-spot laser welding of thick aluminum alloy with narrow gap［D］. Harbin: Harbin Institute of Technology, 2018: 65-66 (in Chinese) .

[12] [12] MA G L, LI L Q, CHEN Y B. Effects of beam configurations on wire melting and transfer behaviors in dual beam laser welding with filler wire［J］. Optics & Laser Technology, 2017, 91: 138-148.

[13] [13] MATJAZ K, MAKOTO F, GIDEON L, et al. Initial transient phase and stability of annular laser beam direct wire deposition［J］. CIRP Annals, 2019, 68(1):233-236.

[14] [14] KUZNETSOV A, JEROMEN A, GOVEKAR E. Droplet detachment regimes in annular laser beam droplet generation from a metal wire［J］. CIRP Annals, 2014, 63(1): 225-228.

[15] [15] PENG J, WANG X X, LI G, et al. Effect of laser welding with filler wire on molten pool dynamic behavior and weld formation［J］. Chinese Journal of Lasers, 2017, 44(11): 1102004 (in Chinese) .

[16] [16] ZHANG Ch, LIU Sh Y, ZHANG F L, et al. Effect of defocus on droplet transfer characteristics of high strength steel by laser welding with fill wire［J］. Laser Technology, 2019, 43(3): 380-386 (in Chinese) .

[17] [17] PENG J, HU S M, WANG X X, et al. Effect of filler metal on three-dimensional transient behavior of key holes and molten pools in laser welding［J］.Chinese Journal of Lasers, 2018, 45(1): 0102003 (in Chinese) .

[18] [18] PENG J, WANG X X, YANG J J, et al. Comparative study on characteristics between single beam and tandem dual beam laser welding with filler wire［J］. Materials Reports, 2018, 32(8): 2822-2827 (in Chinese) .

[19] [19] PENG J, WANG X X, NI Z L, et al. Effect of filler wire melting mode on laser welding process［J］. Transactions of the China Welding Institution, 2020, 41(2): 64-67 (in Chinese) .

[20] [20] SU X G, SHI Y, LIU Ch H. Melting behaviors of filler wire during laser welding［J］. Electric Welding Machine, 2018, 48(6): 13-18(in Chinese).