[1] Guo D M. High performance manufacturing[J]. Journal of Mechanical Engineering, 58, 225-242(2022).

[2] Wang S, Zhao W, Zhao H L et al. Large depth-to-diameter ratio and inverted cone micro-hole machining system with controllable trajectory and its application[J]. Laser & Optoelectronics Progress, 59, 1122002(2022).

[3] Zheng J, Zhang Y R[M]. Study on the internal impingement cooling and the external film cooling characteristics of turbine blades(2018).

[4] Qiao Y Q, Tang A G, Chen T T et al. Femtosecond laser five-axis scanning drilling of deep blind holes[J]. Chinese Journal of Lasers, 50, 2402401(2023).

[5] Dong C Y, Zhang X Y, Gu D H et al. Analysis of diamond micropores forming and defects characteristics under different laser powers[J]. Chinese Journal of Lasers, 50, 2402404(2023).

[6] Zhang X B[M]. Laser drilling technology(2020).

[7] Li S F, Huang K, Ma H S et al. Research progress on design and manufacture technologies of film cooling hole for aeroengine turbine blade[J]. Journal of Engineering for Thermal Energy and Power, 37, 1-11(2022).

[8] Philby J D, Davies G J. Laser drilling[P].

[9] Knowles M R H, Kearsley A J, Andrews A J et al. Laser-drilling[P].

[10] Cuttell M. Method of drilling through a wall of a hollow component[P].

[11] Uchtmann H, Kürschner D, Kelbassa I. Hybrid laser drilling of cooling holes by using millisecond pulsed fiber laser radiation and ultrashort pulsed laser radiation[C], 955-962(2015).

[12] Wang R J, Dong X, Wang K D et al. Two-step approach to improving the quality of laser micro-hole drilling on thermal barrier coated nickel base alloys[J]. Optics and Lasers in Engineering, 121, 406-415(2019).

[13] Sun T, Mei X S, Sun X M et al. Real-time monitoring and control of the breakthrough stage in ultrafast laser drilling based on sequential three-way decision[J]. IEEE Transactions on Industrial Informatics, 19, 5422-5432(2023).

[14] Ho C C, Chang Y J, Hsu J C et al. Monitoring and breakthrough control of laser drilled holes by means of machine vision[J]. Transactions of the Canadian Society for Mechanical Engineering, 37, 355-363(2013).

[15] Sun B D, Wang J, Shu D et al[M]. Precision forming technology of large superalloy castings for aircraft engine(2016).

[16] Corfe A G, Stroud D. Laser barrier material and method of laser drilling[P].

[17] Williams P E. Laser drilling components[P].

[18] Belgacem C H F, Guesdon H J C, Salfrant H. Procede de percage de pieces au laser et materiau d'arret utilise[P].

[19] Gregory O, Griffith A J, Stroud D. Drilling turbine blades[P].

[20] Da S E, Guesdon H J C. Materiau d'arret pour usinage par faisceau laser[P].

[21] Lamm F P, Vontell J H, Bak J et al. Method and material for processing a component for laser machining[P].

[22] Horie J, Mega M, Tanigawa H. Method for manufacturing gas turbine member[P].

[23] Niblock R R, Tacheron P H, Craigen S J et al. Backstrike protection during machining of cooling features[P].

[24] Unger C, Sajti L, Koch J, Bauer T. Verfahren zum laserbohren oder laserschneiden eines werkstücks[P].

[25] Tao J. Experimental studies on laser drilling and back strike protection[D](2017).

[26] Tian D P, He B, Li P et al. Investigation of gas film holes machining with no damage on inner surface of cavity by femtosecond laser[J]. Aviation Precision Manufacturing Technology, 54, 6-9(2018).

[27] Wang B, Liu Y Z, Wang Y F et al. Back strike and its protection of laser machining of microholes on thin-walled cavity[J]. Chinese Journal of Lasers, 48, 1002201(2021).

[28] Bi S, Zhang X B, Zhang W et al. Experimental study on the factors influencing the penetration forming time of small holes processed by ultrafast laser[J]. Infrared and Laser Engineering, 52, 20230347(2023).

[29] Li S Y, Fu G, Li H L et al. Research progress on absorptivity of selective laser melting additive manufacturing[J]. Materials Reports, 37, 202-211(2023).

[30] Shen J B. Study on laser absorptivity and selective laser melting forming of copper and copper alloy powder[D](2021).

[31] Simchi A. The role of particle size on the laser sintering of iron powder[J]. Metallurgical and Materials Transactions B, 35, 937-948(2004).

[32] Yang Y, Gu D D, Dai D H et al. Laser energy absorption behavior of powder particles using ray tracing method during selective laser melting additive manufacturing of aluminum alloy[J]. Materials & Design, 143, 12-19(2018).

[33] Wang D Z, Yu C F, Zhou X et al. Dense pure tungsten fabricated by selective laser melting[J]. Applied Sciences, 7, 430(2017).

[34] Warlimont H, Martienssen W[M]. Springer handbook of materials data(2018).

[35] Tanious R, Manolov R. Violin plots as visual tools in the meta-analysis of single-case experimental designs[J]. Methodology, 18, 221-238(2022).

[37] Xu Z W, Guo J M, Han Z S et al. Preparation and properties of polyvinyl alcohol/modified graphene oxide barrier coating[J]. Paint & Coatings Industry, 52, 21-26, 33(2022).

[38] Zhu Q M, Chen X Q, Li D Z et al. Research progress on transparent and high barrier PVA coatings for flexible food packaging[J]. Fine Chemicals, 39, 1729-1738, 1746(2022).

[39] Min Y N[M]. Application guide of design of experiments (DOE)(2011).

[40] Steen W M, Mazumder J[M]. Laser material processing(2010).

[41] Yan S P, Zhang A F, Liang S D et al. Measurement of laser light absorptivity of commonly used metals in laser additive manufacturing technique[J]. Aeronautical Manufacturing Technology, 60, 97-100(2017).

[42] Werheit H, Schwetz K A. Comparative optical investigations of sintered and monocrystalline black and green silicon carbide (SiC)[J]. Journal of Solid State Chemistry, 177, 580-585(2004).

[43] Smausz T, Kondász B, Gera T et al. Determination of UV–visible–NIR absorption coefficient of graphite bulk using direct and indirect methods[J]. Applied Physics A, 123, 633(2017).

[44] Zhang R. Study on the machining performance and material removal mechanism of single-crystal silicon carbide substrate by femtosecond lasers[D](2021).