Photonic Sensors, Volume. 2, Issue 2, 166(2012)

Research on Fiber-grating-based Wireless Sensor Networks

Bo LIU, Jinjie CHEN*, Hao ZHANG, and and Xiaoyi DONG
Author Affiliations
  • Key Laboratory of Photoelectric Information Technical Science, Ministry of Education,Institute of Modern Optics, Nankai University, Tianjin, 300071, China
  • show less
    References(35)

    [1] [1] B. Liu, J. Zeng, C. X. Xiao, et al., “A novel method for the demodulation of fiber Bragg grating sensing system based on chirp grating,” in Proc. SPIE, vol. 5279, pp. 555-559, 2004.

    [2] [2] L. F. Xue, Q. D. Zhao, J. G. Liu, G. L. Huang, T. Guo, and X. Y. Dong, “Force sensing with temperature self-compensated based on a loop thin-wall section beam,” IEEE Photonics Technology Letters, vol. 18, no. 1, pp. 271-273, 2006.

    [3] [3] W. G. Zhang, Y. L. Huang, Xiang Yang, T. Z. Rong, Q. D. Zhao, G. Y. Kai, S. Z. Yuan, and X. Y. Dong, “Temperature-independent stress and displacement bi-directional sensing tuned by applying bilateral cantilever beam,” Chinese Physical Letters, vol. 19, no. 1, pp. 76-78, 2002 (in Chinese).

    [4] [4] W. G. Zhang, X. Y. Dong, D. J. Feng, Z. X. Qin, and Q. D. Zhao, “Linear fiber-grating-type sensing tuned by applying torsion stress,” Electronics Letters, vol. 36, no. 20, pp. 1686-1688, 2000.

    [5] [5] T. Guo, Q. D. Zhao, H. Zhang, C. S. Zhang, G. L. Huang, L. F. Xue, and X. Y. Dong, “Temperature-insensitive fiber Bragg grating dynamic pressure sensing system,” Optics Letters, vol. 31, no. 15, pp. 2269-2271, 2006.

    [6] [6] P. M. Cavaleiro, F. M. Araujo, and A. B. Lobo Ribeiro, “Metal-coated fiber Bragg grating sensor for electric current metering,” Electronics Letters, vol. 34, no. 11, pp. 1133-1135, 1998.

    [7] [7] X. Y. Dong, H. Y. Meng, G. Y. Kai, Z. G. Liu, and X. Y. Dong, “Bend measurement with chirp of fiber Bragg grating,” Smart Materials and Structures, vol. 10, no. 5, pp. 1111-1113, 2001.

    [8] [8] X. Y. Dong, Y. Q. Liu, Z. G. Liu, and X. Y. Dong, “Simultaneous displacement and temperature measurement with cantilever-based fiber Bragg grating sensor,” Opt. Comm., vol. 192, no. 1-3, pp. 213-217, 2001.

    [9] [9] W. G. Zhang, Z. W. Xu, X. P. Yang, G. Y. Kai, S. Z. Yuan, and X. Y. Dong, “Study of fiber-type sensor of refractive indices and concentration of liquids,” in Proc. SPIE, vol. 4595, pp. 209-212, 2001.

    [10] [10] C. Y. Lin, L. A. Wang, and G. W. Chern, “Corrugated long-period fiber grating as strain, torsion, and bending sensors,” Journal of Lightwave Technology, vol. 19, no. 8, pp. 1159-1168, 2001.

    [11] [11] A. D. Kersey, “Optical fiber sensors for permanent downwell monitoring applications in the oil and gas industry,” IEICE Trans. Electron., vol. E83-C, no. 3, pp. 400-404, 2000.

    [12] [12] R. Arai, A. Sumita, and S. Makino, “Large-scale hybrid monitoring system for temperature, strain, and vibration using fiber Bragg grating sensors,” in Proc. SPIE, vol. 4920, pp. 62-72, 2002.

    [13] [13] W. W. Morey, G. Meltz, and W. H. Glenn, “Fiber Bragg grating sensors,” in Proc. SPIE (Fiber Optics & Laser Sensors VII), vol. 1169, pp. 98-107, 1989.

    [14] [14] L. Zhang, Y. Liu, J. A. R. Williams, and I. Bennion, “Enhanced FBG strain sensing multiplexing capacity using combination of intensity and wavelength dual-coding technique,” Photonics Technology Letters, vol. 11, no. 12, pp. 1638-1640, 1999.

    [15] [15] P. C. Peng, et al., “Intensity and wavelength-division multiplexing FBG sensor system using a tunable multiport fiber ring laser,” Photonics Technology Letters, vol. 16, no. 1, pp. 230-232, 2004.

    [16] [16] J. M. Baptista, S. Abad, G. M. Rego, et al., “Wavelength multiplexing of frequency-based self-referenced fiber optic intensity sensors,” Optical Engineers, vol. 43, no. 3, pp. 702-707, 2004.

    [17] [17] Y. L. Yu, H. Y. Tan, et al., “Active spatial wavelength division multiplexed fiber Bragg grating sensor system,” Chinese Jounal of Lasers, vol. 29, no. 2, pp. 131-134, 2002 (in Chinese).

    [18] [18] Y. L. Yu, H. Y. Tam, et al., “Passive fiber Bragg grating sensor system using combined spatial and time division multiplexing technique,” Acta Optica Sinica, vol. 21, no. 11, pp. 1313-1315, 2001 (in Chinese).

    [19] [19] L. B. Yuan and J. Yang, “Two-loop-based low-coherence multiplexing fiber-optic sensor network with a Michelson optical path demodulator,” Optics Letters, vol. 30, no. 6, pp. 601-603, 2005.

    [20] [20] C. Y. Chong and S. P. Kumar, “Sensor networks: evolution, opportunities, and challenges,” in Proc. IEEE, vol. 91, no. 8, pp. 1247-1256, 2003.

    [21] [21] K. Chintalapudi, et al., “Monitoring civil structures with a wireless sensor network,” IEEE Internet Computing, vol. 10, no. 2, pp. 26-34, 2006.

    [22] [22] J. S. Lee and P. L. Hsu, “Design and implementation of the SNMP agents for remote monitoring and control via UML and Petri Nets,” IEEE Transactions on Control Systems Technology, vol. 12, no. 2, pp. 293-302, 2004.

    [23] [23] J. L. Peterson, Petri Net Theory and Modeling of Systems, New Jersey: Prentice Hall, 1981, pp. 280.

    [24] [24] E. Waltz and J. Lilnas, Multisensor data fusion. Boston: Artech House, 2000.

    [25] [25] D. L. Hall and J. Llinas, “An introduction to multisensor data fusion,” in Proc. IEEE, vol. 85, no. 1, pp. 6-23, 1997.

    [26] [26] B. Dasarathy, “Information fusion, data mining and knowledge discovery,” Information Fusion, vol. 4, no. 1, pp. 1-3, 2003.

    [27] [27] J. K. Uhlmann, “Covariance consistency method for fault-tolerant distributed data fusion,” Information Fusion, vol. 4, no. 3, pp. 201-215, 2003.

    [28] [28] G. Saporta, “Data fusion and data grafting,” Computational Statistics and Data Analysis, vol. 38, no. 4, pp. 465-473, 2002.

    [29] [29] H. Z. Sasiadek, “Sensor fusion,” Annual Reviews in Control, vol. 26, no. 26, pp. 203-228, 2002.

    [30] [30] T. Richard, “Principles of effective multi-sensor data fusion,” Military Technology, vol. 27, no. 5, pp. 29-37, 2003.

    [31] [31] H. D. Whyte, “Sensor models and multi-sensor integration,” The International Journal of Robotics Research, vol. 7, no. 6, pp. 97-113, 1988.

    [32] [32] D. Y. Yang and Y. Yamane, “Multi-sensor data fusion and its application to industrial control,” in Proc. of the 39th SICE Annual Conference International Session Papers (2000), vol. 3, pp. 215-220, 2002.

    [33] [33] V. Megalooikonomou and Y. Yesha, “Space efficient quantization for distributed estimation by a multi-sensor fusion system,” Information Fusion, vol. 5, no. 4, pp. 299-308, 2004.

    [34] [34] X. H. Huang, M. Wang, and Z. Y. Huang, “Information acquisition and data fusion structures for multi-sensor systems,” Science and Technology of Information Acquisition and their Applications, vol. 8, no. 11, pp. 22-26, 2003.

    [35] [35] G. Werner-Allen, et al., “Deploying a wireless sensor network on an active volcano,” IEEE Internet Computing, vol. 10, no. 2, pp. 18-25, 2006.

    Tools

    Get Citation

    Copy Citation Text

    Bo LIU, Jinjie CHEN, Hao ZHANG, and Xiaoyi DONG. Research on Fiber-grating-based Wireless Sensor Networks[J]. Photonic Sensors, 2012, 2(2): 166

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: Regular

    Received: Sep. 12, 2011

    Accepted: Dec. 27, 2011

    Published Online: Oct. 24, 2013

    The Author Email: Jinjie CHEN (jasoncjj2007@163.com)

    DOI:10.1007/s13320-012-0007-1

    Topics