[1] ZHANG Baosheng, WANG Qiangdong, LI Ming. Effect of 18CrNiMo7 tool steel surface treatment on the properties of Ni60A laser cladding layer[J]. Applied Laser, 43, 15-22(2019).

[2] ZHANG Fei, ZHENG Hao, LI Pengfei et al. Numerical simulation of thermal effect of high power diamond Raman laser[J]. Journal of Applied Optics, 44, 1201-1211(2023).

[3] ZHANG Jun, DU Chao, YU Changzhi et al. Design and application of distributed Raman temperature measurement system based on multi-peak Gaussian fitting[J]. Journal of Applied Optics, 44, 128-136(2023).

[4] AN Qiang, QI Wenjun, ZUO Xiaogang. Microstructure and wear resistance of in situ TiC reinforced Ti-based coating by laser cladding on TA15 titanium alloy surface[J]. Journal of Materials Engineering, 50, 139-146(2022).

[5] MU Rangxiu, ZHANG Jia, LONG Jingyu et al. Study on spectral beam combination technology of high power laser[J]. Journal of Applied Optics, 43, 792-797(2022).

[6] MARY C, LE MOGNE T, BEAUGIRAUD B et al. Tribochemistry of a Ti alloy under fretting in air: evidence of titanium nitride formation[J]. Tribology Letters, 34, 211-222(2009).

[7] WU Yanmei, BISSON T, FU Yunchang et al. Calculation of heat treatment of steel irradiated by pulse laser[J]. Laser Journal, 29, 66-68(2008).

[8] ZHANG Chunyan, YANG Wu, MA Chao. Numerical simulation of temperature field in laser surface remelting rare earth magnesium alloy and its corrosion resistance[J]. Hot Working Technology, 46, 143-147(2017).

[9] ZHU Ran, ZHANG Yongkang, SUN Guifang et al. Numerical simulation of residual stress fields in three-dimensional flattened laser shocking of 2024 aluminum alloy[J]. Chinese Journal of Lasers, 44, 802007(2017).

[10] TAN Wendan, PANG Ming, JIANG Guoye et al. Numerical simulation of temperature field in laser phase-transformation hardening of highly-enhanced diesel engine valve seats[J]. Laser & Optoelectronics Progress, 55, 111601(2018).

[11] PANG Ming, ZHANG Xiaohan, LIU Guang et al. Effect of preheating temperature on temperature field of laser melting RuT300[J]. Laser & Optoelectronics Progress, 56, 071601(2019).

[12] LI Xinyang, LI Long, REN Jiaxin et al. Temperature and stress fields of Yb: YAG crystal end-pumped by laser diode[J]. Infrared and Laser Engineering, 53, 118-125(2024).

[13] LI Long, NIE Jianping, SHI Peng et al. Temperature field characteristic of YAG-Nd: YAG composite crystal rod end-pumped by laser diode[J]. Chinese Journal of Lasers, 37, 917-922(2010).

[14] SHIN W S, YOO H J, KIM J H et al. Effect of laser heat-treatment and laser nitriding on the microstructural evolutions and wear behaviors of AISI P21 mold steel[J]. Metals, 10, 1487(2020).

[15] UMEZAWA O, ISHIKAWA K. Electrical and thermal conductivities and magnetization of some austenitic steels, titanium and titanium alloys at cryogenic temperatures[J]. Cryogenics, 32, 873-880(1992).

[16] TOULOUKIAN Y S, KIRBY R K, TAYLOR R E et al. Numerical data on thermal linear expansion of metallic elements and alloys[M]. Thermal Expansion, 1353-1371(1975).