[1] Liu Y X, Li X G, Zhang Y N et al. Fiber-optic sensors based on Vernier effect[J]. Measurement, 167, 108451(2021).

[2] Wu T G, Liu G W, Fu S G et al. Recent progress of fiber-optic sensors for the structural health monitoring of civil infrastructure[J]. Sensors, 20, 4517(2020).

[3] Fan L, Bao Y. Review of fiber optic sensors for corrosion monitoring in reinforced concrete[J]. Cem Concr Compos, 120, 104029(2021).

[4] Zheng Y, Zhu Z W, Xiao W et al. Review of fiber optic sensors in geotechnical health monitoring[J]. Opt Fiber Technol, 54, 102127(2020).

[5] Lei X Q, Dong X P, Sun T et al. Ultrasensitive refractive index sensor based on Mach-Zehnder interferometer and a 40μm fiber[J]. J Lightwave Technol, 39, 5625-5633(2021).

[6] Gao Z G, Feng Y H, Chen H L et al. Refractive index and temperature sensing system with high sensitivity and large measurement range using an optical fiber[J]. IEEE Trans Instrum Meas, 72, 9502706(2023).

[7] Zhao L, Wang J Q, Li Z et al. Quasi-distributed fiber optic temperature and humidity sensor system for monitoring of grain storage in granaries[J]. IEEE Sens J, 20, 9226-9233(2020).

[8] Qin Z G, Qu S, Wang Z Q et al. A fully distributed fiber optic sensor for simultaneous relative humidity and temperature measurement with polyimide-coated polarization maintaining fiber[J]. Sens Actuators B Chem, 373, 132699(2022).

[9] Fedorov A Y, Kosheleva N A, Matveenko V P et al. Strain measurement and stress analysis in the vicinity of a fiber Bragg grating sensor embedded in a composite material[J]. Compos Struct, 239, 111844(2020).

[10] Dong L G, Gang T T, Bian C et al. A high sensitivity optical fiber strain sensor based on hollow core tapering[J]. Opt Fiber Technol, 56, 102179(2020).

[11] Cui Y, Jiang Y, Liu T M et al. A dual-cavity Fabry–Perot interferometric fiber-optic sensor for the simultaneous measurement of high-temperature and high-gas-pressure[J]. IEEE Access, 8, 80582-80587(2020).

[12] Lu J Y, Yu Y, Qin S P et al. High-performance temperature and pressure dual-parameter sensor based on a polymer-coated tapered optical fiber[J]. Opt Express, 30, 9714-9726(2022).

[13] Liu Y G, Feng Y P, Wen J L et al. Integrated fiber-optic sensor based on inscription of FBG in seven-core fiber for curvature and temperature measurements[J]. Opt Fiber Technol, 75, 103197(2023).

[14] Braunfelds J, Senkans U, Skels P et al. FBG-based sensing for structural health monitoring of road infrastructure[J]. J Sens, 2021, 8850368(2021).

[15] Wang Y, Tong R J, Zhao K J et al. Optical fiber sensor based on SPR and MZI for seawater salinity and temperature measurement[J]. Opt Laser Technol, 162, 109315(2023).

[16] Gao S, Ji C K, Ning Q Y et al. High-sensitive Mach-Zehnder interferometric temperature fiber-optic sensor based on core-offset splicing technique[J]. Opt Fiber Technol, 56, 102202(2020).

[17] Liu S T, Zhao S X, Liu Q W et al. Ultrahigh-resolution and ultra-simple fiber-optic sensor with resonant Sagnac interferometer[J]. Opt Lett, 48, 3543-3546(2023).

[18] Ge Q, Zhu J H, Cui Y Y et al. Fiber optic temperature sensor utilizing thin PMF based Sagnac loop[J]. Opt Commun, 502, 127417(2022).

[19] Guo J H, Lian S P, Zhang Y et al. High-temperature measurement of a fiber probe sensor based on the Michelson interferometer[J]. Sensors, 22, 289(2021).

[20] Shao M, Zhang R, Zhao X et al. Dual-core fiber based in-line Michelson interferometer for humidity sensing[J]. Opt Fiber Technol, 64, 102570(2021).

[21] Liu Y G, Wen J L, Feng Y P et al. Miniaturized high-sensitivity temperature sensor based on cascaded fiber-optic FPI[J]. IEEE Photonics Technol Lett, 35, 430-433(2023).

[22] Liang J Q, Yu Y, Bian Q et al. Metal-coated high-temperature strain optical fiber sensor based on cascaded air-bubble FPI-FBG structure[J]. Opt Express, 31, 16795-16811(2023).

[23] Liu B, Zhang H. Polarimetric distributed Bragg reflector fiber laser sensor array for simultaneous measurement of transverse load and temperature[J]. Opt Fiber Technol, 17, 619-625(2011).

[24] Han S X, Yan J Y, Cao C F et al. Single-mode GaSb-based laterally coupled distributed-feedback laser for CO2 gas detection[J]. Chin Phys B, 32, 104205(2023).

[25] Feng D Q, Tang Y X, Lei R et al. A Polarimetric fiber ring laser incorporating a coupled optoelectronic oscillator and its application to magnetic field sensing[J]. Photonics, 10, 662(2023).

[26] Liang L J, Ren G B, Yin B et al. Refractive index and temperature sensor based on fiber ring laser with STCS fiber structure[J]. IEEE Photonics Technol Lett, 26, 2201-2204(2014).

[27] Lin W H, Zhou S J, Shao L Y et al. In-fiber Mach–Zehnder interferometer based on Er doped up-taper and peanut-shaped fiber structure in fiber ring laser[J]. IEEE Access, 9, 128126-128132(2021).

[28] Sanchez-Gonzalez A, Perez-Herrera R A, Roldan-Varona P et al. A dual-wavelength fiber laser sensor with temperature and strain discrimination[J]. Sensors, 22, 6888(2022).

[29] Lin W H, Liu Y H, Shum P P et al. In-line Mach Zehnder interferometer based on ytterbium doped fiber with up-taper structure in fiber ring laser and its application in sensing[J]. Sensors, 22, 9196(2022).

[30] Liu B W, Shirahata T, Ye G Y et al. Hybrid wavelength manipulation with enhanced ambient-thermal adaptability in an all-polarization-maintaining mode-locked fiber laser[J]. J Lightwave Technol, 42, 3376-3384(2024).

[31] Chen Z M, Huang C Q, Zhu Q C et al. Temperature sensor of cascaded sagnac interferometer based on vernier effect[J]. Semicond Optoelectron, 44, 845-850(2023).