[5] [5] ZHANG X C, WU D, XIA Z F, et al. Characteristics and mechanism of surface damage of hybrid ceramic ball bearings for high-precision machine tool[J]. Engineering Failure Analysis, 2022, 142, 106784.

[6] [6] AN L C, WANG D Y, ZHU D. Improvement on surface quality of 316L stainless steel fabricated by laser powder bed fusion via electrochemical polishing in NaNO3 solution[J]. Journal of Manufacturing Processes, 2022, 83: 325-338.

[7] [7] PANOV D, ORESHKIN O, VOLOSKOV B, et al. Pore healing effect of laser polishing and its influence on fatigue properties of 316L stainless steel parts fabricated by laser powder bed fusion[J]. Optics & Laser Technology, 2022, 156: 108535.

[8] [8] ZHUANG D D, DU B, ZHANG S H, et al. Effect and action mechanism of ultrasonic assistance on microstructure and mechanical performance of laser cladding 316L stainless steel coating[J]. Surface and Coatings Technology, 2022, 433: 128122.

[9] [9] GNEN A, LINDNER T, KARAKA M S, et al. Effect of the boriding environment on the wear response of laser-clad AlCoCrFeNi high entropy alloy coatings[J]. Surface and Coatings Technology, 2022, 447: 128830.

[10] [10] LI X F, FENG Y H, WANG X, et al. Microstructures and properties of AlCrFeNiMnx high-entropy alloy coatings fabricated by laser cladding on a copper substrate[J]. Journal of Alloys and Compounds, 2022, 926: 166778.

[11] [11] ZENG J Y, LIAN G F, CHEN C R, et al. Influences of the TiC composite introduction method on the microstructures and properties of Nickel-Based coatings[J]. Optics & Laser Technology, 2022, 156: 108633.

[12] [12] LIU S S, ZHAO G L, WANG X H, et al. Design and characterization of AlNbMoTaCux high entropy alloys laser cladding coatings[J]. Surface and Coatings Technology, 2022, 447: 128832.

[13] [13] CEN L, DU W B, GONG M C, et al. Effect of high-frequency beam oscillation on microstructures and cracks in laser cladding of Al-Cu-Mg alloys[J]. Surface and Coatings Technology, 2022, 447: 128852.

[14] [14] WEN J H, ZHANG L J, NING J, et al. Laser additively manufactured intensive dual-phase steels and their microstructures, properties and corrosion resistance[J]. Materials & Design, 2020, 192: 108710.

[15] [15] QIAN S X, DAI Y B, GUO Y H, et al. Microstructure and wear resistance of multi-layer Ni-based alloy cladding coating on 316L SS under different laser power[J]. Materials, 2021, 14(4): 781.

[16] [16] NURMINEN J, NKKI J, VUORISTO P. Microstructure and properties of hard and wear resistant MMC coatings deposited by laser cladding[J]. International Journal of Refractory Metals and Hard Materials, 2009, 27(2): 472-478.

[17] [17] WU Q L, LI W G, ZHONG N, et al. Microstructure and wear behavior of laser cladding VC-Cr7C3 ceramic coating on steel substrate[J]. Materials & Design, 2013, 49: 10-18.

[18] [18] CAO Y B, ZHI S X, QI H B, et al. Evolution behavior of ex-situ NbC and properties of Fe-based laser clad coating[J]. Optics & Laser Technology, 2020, 124: 105999.

[19] [19] LI X F, YANG X H, YI D H, et al. Effects of NbC content on microstructural evolution and mechanical properties of laser cladded Fe50Mn30Co10Cr10-x NbC composite coatings[J]. Intermetallics, 2021, 138: 107309.

[20] [20] ZHAO T, ZHANG S, ZHOU F Q, et al. Microstructure evolution and properties of in situ TiC reinforced titanium matrix composites coating by plasma transferred arc welding (PTAW)[J]. Surface and Coatings Technology, 2021, 424: 127637.

[21] [21] MA J W, ZHANG B C, FU Y, et al. Effect of cold deformation on corrosion behavior of selective laser melted 316L stainless steel bipolar plates in a simulated environment for proton exchange membrane fuel cells[J]. Corrosion Science, 2022, 201: 110257.

[22] [22] XIN B, REN J Y, WANG X Q, et al. Effect of laser remelting on cladding layer of inconel 718 superalloy formed by laser metal deposition[J]. Materials, 2020, 13(21): 4927.

[23] [23] KAKU S, HIWATARI K L, YOSHINO J. Scanning tunneling microscopy of strained--Sn (001) surface grown on InSb (001) substrate[J]. Applied Surface Science, 2022, 571: 151347.

[24] [24] LI X, ZHANG C H, ZHANG S, et al. Design, preparation, microstructure and properties of novel wear-resistant stainless steel-base composites using laser melting deposition[J]. Vacuum, 2019, 165: 139-147.

[25] [25] ZHOU S F, DAI X Q, ZHENG H Z. Microstructure and wear resistance of Fe-based WC coating by multi-track overlapping laser induction hybrid rapid cladding[J]. Optics & Laser Technology, 2012, 44(1): 190-197.

[26] [26] YE X X, CHEN B, SHEN J H, et al. Microstructure and strengthening mechanism of ultrastrong and ductile Ti-xSn alloy processed by powder metallurgy[J]. Journal of Alloys and Compounds, 2017, 709: 381-393.

[27] [27] TSAO L C, HUANG C H, CHUNG C H, et al. Influence of TiO2 nanoparticles addition on the microstructural and mechanical properties of Sn0.7Cu nano-composite solder[J]. Materials Science and Engineering: A, 2012, 545: 194-200.

[28] [28] ZHAO T, ZHANG S, WANG Z Y, et al. Modulating heat input to optimize corrosion and synergistic cavitation erosion-corrosion behavior of Ni201 cladding layer by cold metal transfer[J]. Surface and Coatings Technology, 2022, 443: 128595.

[29] [29] TARASOV S Y, FILIPPOV A V, KOLUBAEV E A, et al. Adhesion transfer in sliding a steel ball against an aluminum alloy[J]. Tribology International, 2017, 115: 191-198.

[30] [30] CHAI L J, WANG C, XIANG K, et al. Phase constitution, microstructure and properties of pulsed laser-clad ternary CrNiTi medium-entropy alloy coating on pure titanium[J]. Surface and Coatings Technology, 2020, 402: 126503.