[1] [1] Cui Z P, Li G and Zong W J 2019 A polishing method for single crystal diamond (100) plane based on nano silica and nano nickel powder Diam. Relat. Mater. 95 141–53

[2] [2] Anaya J et al 2016 Control of the in-plane thermal conductivity of ultra-thin nanocrystalline diamond films through the grain and grain boundary properties Acta Mater. 103 141–52

[3] [3] Hicks M L, Pakpour-Tabrizi A C and Jackman R B 2019 Polishing, preparation and patterning of diamond for device applications Diam. Relat. Mater. 97 107424

[4] [4] Mochalin V N, Shenderova O, Ho D and Gogotsi Y 2012 The properties and applications of nanodiamonds Nat. Nanotechnol. 7 11–23

[5] [5] Lu X Z, Chen J L, Wen Q L, Lu J and Jiang F 2021 Short-pulse laser-induced plasma micro-etching of high-temperature and high pressure single crystal diamond Acta Photon. Sin. 50 129–37

[6] [6] Schuelke T and Grotjohn T A 2013 Diamond polishing Diam. Relat. Mater. 32 17–26

[7] [7] Zhu T-F et al 2017 Fabrication of monolithic diamond photodetector with microlenses Opt. Express 25 31586–94

[8] [8] Li P, Chen S Y, Dai H F, Yang Z M, Chen Z Q, Wang Y S, Chen Y Q, Peng W Q, Shan W B and Duan H G 2021 Recent advances in focused ion beam nanofabrication for nanostructures and devices: fundamentals and applications Nanoscale 13 1529–65

[9] [9] Mi S C, Kiss M, Graziosi T and Quack N 2020 Integrated photonic devices in single crystal diamond J. Phys. Photon. 2 042001

[10] [10] Tao Y, Boss J M, Moores B A and Degen C L 2014 Single-crystal diamond nanomechanical resonators with quality factors exceeding one million Nat. Commun. 5 3638

[11] [11] Sohn Y I, Miller R, Venkataraman V and Loncˇar M 2017 Mechanical and optical nanodevices in single-crystal quartz Appl. Phys. Lett. 111 263103

[12] [12] Liao M Y 2021 Progress in semiconductor diamond photodetectors and MEMS sensors Funct. Diam. 1 29–46

[13] [13] Zong W J, Li Z Q, Sun T, Cheng K, Li D and Dong S 2010 The basic issues in design and fabrication of diamond-cutting tools for ultra-precision and nanometric machining Int. J. Mach. Tools Manuf. 50 411–9

[14] [14] Goel S, Luo X C, Agrawal A and Reuben R L 2015 Diamond machining of silicon: a review of advances in molecular dynamics simulation Int. J. Mach. Tools Manuf. 88 131–64

[15] [15] Chen K, Meng W J and Sinclair G B 2012 Size dependence of the plane-strain response of single-crystal Al to indentation by diamond wedges Acta Mater. 60 4879–87

[16] [16] Bouzakis K D, Pappa M, Maliaris G and Michailidis N 2013 Fast determination of parameters describing manufacturing imperfections and operation wear of nanoindenter tips Surf. Coat. Technol. 215 218–23

[17] [17] Roy S, Balla V K, Mallik A K, Ralchenko V G, Bolshakov A P, Ashkinazi E E and Dandapat N 2018 A comprehensive study of mechanical and chemo-mechanical polishing of CVD diamond Mater. Today Proc. 5 9846–54

[18] [18] Lee S T, Lin Z and Jiang X 1999 CVD diamond films: nucleation and growth Mater. Sci. Eng. R 25 123–54

[19] [19] Thumm M 2011 Progress on gyrotrons for ITER and future thermonuclear fusion reactors IEEE Trans. Plasma Sci. 39 971–9

[20] [20] Berman L E, Hastings J B, Siddons D P, Koike M, Stojanoff V and Hart M 1993 Diamond crystal x-ray optics for high-power-density synchrotron radiation beams Nucl. Instrum. Methods Phys. Res. A 329 555–63

[21] [21] Nebel C E, Rezek B and Shin D 2008 Electrochemical properties of undoped diamond Physics and Applications of CVD Diamond ed S Koizumi, C Nebel and M Nesladek (Wiley) pp 93–127

[22] [22] Koizumi S, Watanabe K, Hasegawa M and Kanda H 2001 Ultraviolet emission from a diamond pn junction Science 292 1899–901

[23] [23] Tatsumi N, Harano K, Ito T and Sumiya H 2016 Polishing mechanism and surface damage analysis of type IIa single crystal diamond processed by mechanical and chemical polishing methods Diam. Relat. Mater. 63 80–85

[24] [24] Derry T E, Van Der Berg N and Makau N W 2008 Diamond surfaces polished both mechanically and manually; an atomic force microscopy (AFM) study Diam. Relat. Mater. 17 127–36

[25] [25] Williams O A, Douhéret O, Daenen M, Haenen K, ˉOsawa E and Takahashi M 2007 Enhanced diamond nucleation on monodispersed nanocrystalline diamond Chem. Phys. Lett. 445 255–8

[26] [26] Jin T Y, Ma M D, Li B Z, Gao Y F, Zhao Q L, Zhao Z S, Chen J Y and Tian Y J 2020 Mechanical polishing of ultrahard nanotwinned diamond via transition into hard sp2-sp3 amorphous carbon Carbon 161 1–6

[27] [27] Zhang T, Jiang F, Huang H, Lu J, Wu Y Q, Jiang Z Y and Xu X P 2021 Towards understanding the brittle–ductile transition in the extreme manufacturing Int. J. Extrem. Manuf. 3 022001

[28] [28] Luo H, Ajmal K M, Liu W, Yamamura K and Deng H 2021 Polishing and planarization of single crystal diamonds: state-of-the-art and perspectives Int. J. Extrem. Manuf. 3 022003

[29] [29] Tolkowsky M 1920 Research on the Abrading, Grinding or Polishing of Diamonds (University of London) (available at: http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos. 538936)

[30] [30] Doronin M A, Polyakov S N, Kravchuk K S, Molchanov S P, Lomov A A, Troschiev S Y and Terentiev S A 2018 Limits of single crystal diamond surface mechanical polishing Diam. Relat. Mater. 87 149–55

[31] [31] Zong W J, Cheng X and Zhang J J 2016 Atomistic origins of material removal rate anisotropy in mechanical polishing of diamond crystal Carbon 99 186–94

[32] [32] Wang C Y, Zhang F L, Kuang T C and Chen C L 2006 Chemical/mechanical polishing of diamond films assisted by molten mixture of LiNO3 and KNO3 Thin Solid Films 496 698–702

[33] [33] Lin Y C, Lu J, Tong R L, Luo Q F and Xu X P 2018 Surface damage of single-crystal diamond (100) processed based on a sol-gel polishing tool Diam. Relat. Mater. 83 46–53

[34] [34] Xu H Q, Zang J B, Tian P F, Yuan Y G, Wang Y H, Yu Y Q, Lu J, Xu X P and Zhang P W 2018 Surface conversion reaction and high efficient grinding of CVD diamond films by chemically mechanical polishing Ceram. Int. 44 21641–7

[35] [35] Nagai M, Nakanishi K, Takahashi H, Kato H, Makino T, Yamasaki S, Matsumoto T, Inokuma T and Tokuda N 2018 Anisotropic diamond etching through thermochemical reaction between Ni and diamond in high-temperature water vapour Sci. Rep. 8 6687

[36] [36] Yuan Z W, Jin Z J, Kang R K and Wen Q 2012 Tribochemical polishing CVD diamond film with FeNiCr alloy polishing plate prepared by MA-HPS technique Diam. Relat. Mater. 21 50–57

[37] [37] Zheng Y T et al 2020 Subsurface cleavage of diamond after high-speed three-dimensional dynamic friction polishing Diam. Relat. Mater. 101 107600

[38] [38] Konov V I 2012 Laser in micro and nanoprocessing of diamond materials Laser Photonics Rev. 6 739–66

[39] [39] Liu H G, Xie L R, Lin W X and Hong M H 2021 Optical quality laser polishing of CVD diamond by UV pulsed laser irradiation Adv. Opt. Mater. 9 2100537

[40] [40] Kawabata Y, Taniguchi J and Miyamoto I 2004 XPS studies on damage evaluation of single-crystal diamond chips processed with ion beam etching and reactive ion beam assisted chemical etching Diam. Relat. Mater. 13 93–98

[41] [41] McGeough J A 1988 Advanced Methods of Machining (Springer)

[42] [42] Olsen R H, Aspinwall D K and Dewes R C 2004 Electrical discharge machining of conductive CVD diamond tool blanks J. Mater. Process. Technol. 155–156 1227–34

[43] [43] Yuan Z J, Yao Y X, Zhou M and Bal Q S 2003 Lapping of single crystal diamond tools CIRP Ann. 52 285–8

[44] [44] Chen S T and Chen Y Y 2020 Microgroove grinding of monocrystalline diamond using medium-frequency vibration-assisted grinding with self-sensing grinding force technique J. Mater. Process. Technol. 282 116686

[45] [45] Deng H, Endo K and Yamamura K 2017 Damage-free finishing of CVD-SiC by a combination of dry plasma etching and plasma-assisted polishing Int. J. Mach. Tools Manuf. 115 38–46

[46] [46] Liu N, Sugawara K, Yoshitaka N, Yamada H, Takeuchi D, Akabane Y, Fujino K, Kawai K, Arima K and Yamamura K 2020 Damage-free highly efficient plasma-assisted polishing of a 20-mm square large mosaic single crystal diamond substrate Sci. Rep. 10 19432

[47] [47] Anan S, Touge M, Kubota A and Watanabe J 2009 Study on ultra precision polishing of single crystal diamond substrates under ultraviolet irradiation Key Eng. Mater. 407–408 355–8

[48] [48] Watanabe J, Touge M and Sakamoto T 2013 Ultraviolet-irradiated precision polishing of diamond and its related materials Diam. Relat. Mater. 39 14–19

[49] [49] Chen J L, Lu X Z, Wen Q L, Jiang F, Lu J, Lei D J and Pan Y C 2021 Review on laser-induced etching processing technology for transparent hard and brittle materials Int. J. Adv. Manuf. Technol. 117 2545–64

[50] [50] Zheng Y T et al 2022 Surface etching evolution of mechanically polished single crystal diamond with subsurface cleavage in microwave hydrogen plasma: topography, state and electrical properties Vacuum 199 110932

[51] [51] Luo H, Ajmal K M, Liu W, Yamamura K and Deng H 2021 Atomic-scale and damage-free polishing of single crystal diamond enhanced by atmospheric pressure inductively coupled plasma Carbon 182 175–84

[52] [52] Kubota A and Takita T 2018 Novel planarization method of single-crystal diamond using 172 nm vacuum-ultraviolet light Precis. Eng. 54 269–75

[53] [53] Ma Z B, Wu J, Shen W L, Yan L, Pan X and Wang J H 2014 Etching of CVD diamond films using oxygen ions in ECR plasma Appl. Surf. Sci. 289 533–7

[54] [54] Huang C, Peng X H, Yang B, Xiang H G, Sun S, Chen X, Li Q B, Yin D Q and Fu T 2018 Anisotropy effects in diamond under nanoindentation Carbon 132 606–15

[55] [55] Xu C, Liu C M and Wang H K 2017 Incipient plasticity of diamond during nanoindentation RSC Adv. 7 36093–100

[56] [56] Richter A, Ries R, Smith R, Henkel M and Wolf B 2000 Nanoindentation of diamond, graphite and fullerene films Diam. Relat. Mater. 9 170–84

[57] [57] Hird J R and Field J E 2004 Diamond polishing Proc. R. Soc. A 460 3547–68

[58] [58] Kraus E H and Slawson C B 1939 Variation of hardness in the diamond Am. Mineral. 24 661–76 (available at: http:// pubs.geoscienceworld.org/msa/ammin/article-abstract/24/ 11/661/537179)

[59] [59] Second P G 1955 Diamond technology production methods for diamond and gem stones Nature 1 75

[60] [60] Tian Y X, Liu H L, Sheldon B W, Webster T J, Yang S C, Yang H L and Yang L 2019 Surface energy-mediated fibronectin adsorption and osteoblast responses on nanostructured diamond J. Mater. Sci. Technol. 35 817–23

[61] [61] Wang H, Yang J and Sun F H 2020 Cutting performances of MCD, SMCD, NCD and MCD/NCD coated tools in high-speed milling of hot bending graphite molds J. Mater. Process. Technol. 276 116401

[62] [62] Alcantar-Pe?na J J, Lee G, Fuentes-Fernandez E M A, Gurman P, Quevedo-Lopez M, Sahoo S, Katiyar R S, Berman D and Auciello O 2016 Science and technology of diamond films grown on HfO2 interface layer for transformational technologies Diam. Relat. Mater. 69 221–8

[63] [63] Xiao C, Hsia F C, Sutton-Cook A, Weber B and Franklin S 2022 Polishing of polycrystalline diamond using synergies between chemical and mechanical inputs: a review of mechanisms and processes Carbon 196 29–48

[64] [64] Butler J E and Windischmann H 1998 Developments in CVD-diamond synthesis during the past decade MRS Bull. 23 22–27

[65] [65] Williams O A 2011 Nanocrystalline diamond Diam. Relat. Mater. 20 621–40

[66] [66] Butler J E and Sumant A V 2008 The CVD of nanodiamond materials Chem. Vap. Depos. 14 145–60

[67] [67] Lu M, Wang H, Song X and Sun F H 2023 Effect of doping level on residual stress, coating-substrate adhesion and wear resistance of boron-doped diamond coated tools J. Manuf. Process. 88 145–56

[68] [68] Auciello O and Sumant A V 2010 Status review of the science and technology of ultrananocrystalline diamond (UNCD?) films and application to multifunctional devices Diam. Relat. Mater. 19 699–718

[69] [69] Yang Q, Zhao J Q, Huang Y P, Zhu X W, Fu W C, Li C M and Miao J Y 2019 A diamond made microchannel heat sink for high-density heat flux dissipation Appl. Therm. Eng. 158 113804

[70] [70] Bhat D G, Johnson D G, Malshe A P, Naseem H, Brown W D, Schaper L W and Shen C H 1995 A preliminary investigation of the effect of post-deposition polishing of diamond films on the machining behavior of diamond-coated cutting tools Diam. Relat. Mater. 4 921–9

[71] [71] Malshe A P, Park B S, Brown W D and Naseem H A 1999 A review of techniques for polishing and planarizing chemically vapor-deposited (CVD) diamond films and substrates Diam. Relat. Mater. 8 1198–213

[72] [72] Zaitsev A M, Kosaca G, Richarz B, Raiko V, Job R, Fries T and Fahrner W R 1998 Thermochemical polishing of CVD diamond films Diam. Relat. Mater. 7 1108–17

[73] [73] Tsai H Y, Ting C J and Chou C P 2007 Evaluation research of polishing methods for large area diamond films produced by chemical vapor deposition Diam. Relat. Mater. 16 253–61

[74] [74] Liu H Z, Zong W J and Cheng X 2021 Behaviors of carbon atoms induced by friction in mechanical polishing of diamond Comput. Mater. Sci. 186 110069

[75] [75] Ralchenko V G, Ashkinazi E E, Zavedeev E V, Khomich A A, Bolshakov A P, Ryzhkov S G, Sovyk D N, Shershulin V A, Yurov V Y and Rudnev V V 2016 High-rate ultrasonic polishing of polycrystalline diamond films Diam. Relat. Mater. 66 171–6

[76] [76] Guo X G, Yuan S, Wang X L, Jin Z J and Kang R K 2019 Atomistic mechanisms of chemical mechanical polishing of diamond (100) in aqueous H2O2/pure H2O: molecular dynamics simulations using reactive force field (ReaxFF) Comput. Mater. Sci. 157 99–106

[77] [77] Chen Y, Zhang L C and Arsecularatne J A 2007 Polishing of polycrystalline diamond by the technique of dynamic friction. Part 2: material removal mechanism Int. J. Mach. Tools Manuf. 47 1615–24

[78] [78] Kühnle J and Weis O 1995 Mechanochemical superpolishing of diamond using NaNO3 or KNO3 as oxidizing agents Surf. Sci. 340 16–22

[79] [79] Yang H P, Jin Z J, Niu L, Wang H C and Niu H 2022 Visible-light catalyzed assisted chemical mechanical polishing of single crystal diamond Diam. Relat. Mater. 125 108982

[80] [80] Xu H Q, Zang J B, Yang G P, Tian P F, Wang Y H, Yu Y Q, Lu J, Xu X P and Zhang P W 2018 An efficient titanium-containing corundum wheel for grinding CVD diamond films Diam. Relat. Mater. 84 119–26

[81] [81] Ramesham R and Rose M F 1998 Polishing of polycrystalline diamond by hot nickel surface Thin Solid Films 320 223–7

[82] [82] Kubota A, Nagae S and Motoyama S 2020 High-precision mechanical polishing method for diamond substrate using micron-sized diamond abrasive grains Diam. Relat. Mater. 10 107644

[83] [83] Zong W J, Li D, Cheng K, Sun T, Wang H X and Liang Y C 2005 The material removal mechanism in mechanical lapping of diamond cutting tools Int. J. Mach. Tools Manuf. 45 783–8

[84] [84] Kubota A, Motoyama S and Touge M 2016 Surface smoothing of a polycrystalline diamond using an iron plate-H2O2 chemical reaction Diam. Relat. Mater. 69 96–101

[85] [85] Kubota A, Fukuyama S, Ichimori Y and Touge M 2012 Surface smoothing of single-crystal diamond (100) substrate by polishing technique Diam. Relat. Mater. 24 59–62

[86] [86] Tang C J, Neves A J, Fernandes A J S, Grácio J and Ali N 2003 A new elegant technique for polishing CVD diamond films Diam. Relat. Mater. 12 1411–6

[87] [87] Grodzinski P 1953 Diamond Technology: Production Methods for Diamond and Gem Stones 2nd edn (N. A. G. Press) (available at: http://cir.nii.ac.jp/crid/113000079 4301423616)

[88] [88] Yang N, Zong W, Li Z and Sun T 2015 Wear process of single crystal diamond affected by sliding velocity and contact pressure in mechanical polishing Diam. Relat. Mater. 58 46–53

[89] [89] Kubota A, Nagae S, Motoyama S and Touge M 2015 Two-step polishing technique for single crystal diamond (100) substrate utilizing a chemical reaction with iron plate Diam. Relat. Mater. 60 75–80

[90] [90] Suzuki K, Iwai M, Ninomiya S and Uematsu T 2009 Dynamic friction polishing method utilizing resistance heating for efficient removal of electrically conductive diamond Adv. Mater. Res. 76–78 325–30

[91] [91] Chen C 2005 Research on Polishing Diamond Film by Chemical Mechanical Polishing Methods (Guangdong University of Technology)

[92] [92] Nguyen V T and Fang T H 2020 Molecular dynamics simulation of abrasive characteristics and interfaces in chemical mechanical polishing Appl. Surf. Sci. 509 144676

[93] [93] Cheng C Y, Tsai H Y, Wu C H, Liu P Y, Hsieh C H and Chang Y Y 2005 An oxidation enhanced mechanical polishing technique for CVD diamond films Diam. Relat. Mater. 14 622–5

[94] [94] Rothschild M, Arnone C and Ehrlich D J 1987 Laser photosublimation of compound semiconductors J. Mater. Res. 2 244–51

[95] [95] Pimenov S M, Kononenko V V, Ralchenko V G, Konov V I, Gloor S, Lüthy W, Weber H P and Khomich A V 1999 Laser polishing of diamond plates Appl. Phys. A 69 81–88

[96] [96] Wang L X, Chen X K, Wu G, Cao S Z, Xiong Y Q, Wang J X and Zhao D C 2017 Study on site-specific polishing of polycrystalline diamond film by KrF excimer laser J. Laser Micro Nanoeng. 12 62–66

[97] [97] Ogawa Y, Ota M, Nakamoto K, Fukaya T, Russell M, Zohdi T I, Yamazaki K and Aoyama H 2016 A study on machining of binder-less polycrystalline diamond by femtosecond pulsed laser for fabrication of micro milling tools CIRP Ann. 65 245–8

[98] [98] Kononenko T V, Pivovarov P A, Khomich A A, Khmelnitsky R A, Plotnichenko V G and Konov V I 2019 Processing of polycrystalline diamond surface by IR laser pulses without interior damage Opt. Laser Technol. 117 87–93

[99] [99] Scalbert W, Tanner D and Holtz R 2020 Development of high-power laser ablation process for polycrystalline diamond polishing Part 2: upscaling of PCD ultra-short pulsed laser ablation to high power Proc. SPIE 11273 1127303

[100] [100] Cui Y X, Guo P, Zhu X M, Tian Y L, Zhang D W and Qi H J 2021 A study of femtosecond laser polishing of CVD nanopolycrystalline diamond films Surf. Rev. Lett. 28 2150023

[101] [101] Prieske M and Vollertsen F 2021 Picosecond-laser polishing of CVD-diamond coatings without graphite formation Mater. Today Proc. 40 1–4

[102] [102] Spencer E G and Schmidt P H 1972 Ion machining of diamond J. Appl. Phys. 43 2956–8

[103] [103] Hoffman A, Paterson P J K and Prawer S 1990 Comparison of the effect of argon and hydrogen ion bombardment on the diamond (100) surface as studied by AES and EELS Nucl. Instrum. Methods Phys. Res. B 52 63–67

[104] [104] Grogan D F, Zhao T, Bovard B G and Macleod H A 1992 Planarizing technique for ion-beam polishing of diamond films Appl. Opt. 31 1483–7

[105] [105] Vivensang C, Ferlazzo-Manin L, Ravet M F, Turban G, Rousseaux F and Gicquel A 1996 Surface smoothing of diamond membranes by reactive ion etching process Diam. Relat. Mater. 5 840–4

[106] [106] Koslowski B, Strobel S and Ziemann P 2000 Ion polishing of a diamond (100) surface artificially roughened on the nanoscale Diam. Relat. Mater. 9 1159–63

[107] [107] Mi S C, Toros A, Graziosi T and Quack N 2019 Non-contact polishing of single crystal diamond by ion beam etching Diam. Relat. Mater. 92 248–52

[108] [108] Lee C L, Gu E, Dawson M D, Friel I and Scarsbrook G A 2008 Etching and micro-optics fabrication in diamond using chlorine-based inductively-coupled plasma Diam. Relat. Mater. 17 1292–6

[109] [109] Schmitt J, Nelissen W, Wallrabe U and V?lklein F 2017 Implementation of smooth nanocrystalline diamond microstructures by combining reactive ion etching and ion beam etching Diam. Relat. Mater. 79 164–72

[110] [110] Harker A B, Flintoff J F and DeNatale J F 1990 Polishing of polycrystalline diamond films Proc. SPIE 1325 222–9

[111] [111] Ieshkin A E, Kushkina K D, Kireev D S, Ermakov Y A and Chernysh V S 2017 Polishing superhard material surfaces with gas-cluster ion beams Tech. Phys. Lett. 43 95–97

[112] [112] Xie L, Zhou T X, St?hr R J and Yacoby A 2018 Crystallographic orientation dependent reactive ion etching in single crystal diamond Adv. Mater. 30 1705501

[113] [113] Sandhu G S and Chu W K 1989 Reactive ion etching of diamond Appl. Phys. Lett. 55 437–8

[114] [114] Li L Z et al 2013 Reactive ion etching: optimized diamond membrane fabrication for transmission electron microscopy J. Vac. Sci. Technol. B 31 06FF01

[115] [115] Hicks M L, Pakpour-Tabrizi A C, Zuerbig V, Kirste L, Nebel C and Jackman R B 2019 Optimizing reactive ion etching to remove sub-surface polishing damage on diamond J. Appl. Phys. 125 244502

[116] [116] Sato Y, Kawamura J, Nagase T, Pahlovy S A and Miyamoto I 2011 Sharpening of CVD diamond coated tools by 0.5?10 keV Ar+ ion beam Diam. Relat. Mater. 20 954–9

[117] [117] Nagase T, Kato H, Pahlovy S A and Miyamoto I 2010 Nanosmoothing of single crystal diamond chips by 1 keV Ar+ ion bombardment J. Vac. Sci. Technol. B 28 263–7

[118] [118] Yamamura K, Takiguchi T, Ueda M, Deng H, Hattori A N and Zettsu N 2011 Plasma assisted polishing of single crystal SiC for obtaining atomically flat strain-free surface CIRP Ann. 60 571–4

[119] [119] Liu N, Sugimoto K, Yoshitaka N, Yamada H, Sun R Y, Kawai K, Arima K and Yamamura K 2022 Effects of polishing pressure and sliding speed on the material removal mechanism of single crystal diamond in plasma-assisted polishing Diam. Relat. Mater. 124 108899

[120] [120] Liu N, Yamada H, Yoshitaka N, Sugimoto K, Sun R Y, Kawai K, Arima K and Yamamura K 2021 Comparison of surface and subsurface damage of mosaic single-crystal diamond substrate processed by mechanical and plasma-assisted polishing Diam. Relat. Mater. 119 108555

[121] [121] Takeuchi D, Watanabe H, Yamanaka S, Okushi H, Sawada H, Ichinose H, Sekiguchi T and Kajimura K 2001 Origin of band-A emission in diamond thin films Phys. Rev. B 63 245328

[122] [122] Takeuchi D, Watanabe H, Sawada H, Yamanaka S, Ichinose H, Sekiguchi T and Okushi H 2001 Origin of band-A emission in homoepitaxial diamond films Diam. Relat. Mater. 10 526–30

[123] [123] Yamamura K, Emori K, Sun R, Ohkubo Y, Endo K, Yamada H, Chayahara A and Mokuno Y 2018 Damage-free highly efficient polishing of single-crystal diamond wafer by plasma-assisted polishing CIRP Ann. 67 353–6

[124] [124] Liu N, Sugimoto K, Yoshitaka N, Yamada H, Sun R Y, Arima K and Yamamura K 2023 Highly efficient finishing of large-sized single crystal diamond substrates by combining nanosecond pulsed laser trimming and plasma-assisted polishing Ceram. Int. 49 19109–23

[125] [125] Butler-Smith P W, Axinte D A, Pacella M and Fay M W 2013 Micro/nanometric investigations of the effects of laser ablation in the generation of micro-tools from solid CVD diamond structures J. Mater. Process. Technol. 213 194–200

[126] [126] Ascarelli P, Cappelli E, Orlando S and Pinzari F 1998 Laser treatment of diamond films Appl. Surf. Sci. 127–129 837–42

[127] [127] Okuchi T, Ohfuji H, Odake S, Kagi H, Nagatomo S, Sugata M and Sumiya H 2009 Micromachining and surface processing of the super-hard nano-polycrystalline diamond by three types of pulsed lasers Appl. Phys. A 96 833–42

[128] [128] Madi C S, Anzenberg E, Ludwig K F Jr and Aziz M J 2011 Mass redistribution causes the structural richness of ion-irradiated surfaces Phys. Rev. Lett. 106 066101

[129] [129] Weima J A, Zaitsev A M, Job R, Kosaca G C, Blum F, Grabosch G, Fahmer W R and Knopp J 1999 Nano-polishing and subsequent optical characterization of CVD polycrystalline diamond films IECON’99. Conf. Proc. 25th Annual Conf. IEEE Industrial Electronics Society (Cat. No. 99CH37029) (IEEE) pp 50–55

[130] [130] Deng H 2016 Development of plasma-assisted polishing for highly efficient and damage-free finishing of single-crystal SiC, GaN and VD-SiC Doctoral Dissertation Osaka University (https://doi.org/10.18910/55988)

[131] [131] Ji J W, Yamamura K and Deng H 2021 Plasma-assisted polishing for atomic surface fabrication of single crystal SiC Acta Phys. Sin. 70 068102

[132] [132] Deng H, Endo K and Yamamura K 2014 Comparison of thermal oxidation and plasma oxidation of 4H-SiC (0001) for surface flattening Appl. Phys. Lett. 104 101608

[133] [133] Deng H, Ueda M and Yamamura K 2014 Characterization of 4H-SiC (0001) surface processed by plasma-assisted polishing Int. J. Adv. Manuf. Technol. 72 1–7

[134] [134] Peguiron A, Moras G, Walter M, Uetsuka H, Pastewka L and Moseler M 2016 Activation and mechanochemical breaking of C–C bonds initiate wear of diamond (110) surfaces in contact with silica Carbon 98 474–83

[135] [135] Thomas E L H, Nelson G W, Mandal S, Foord J S and Williams O A 2014 Chemical mechanical polishing of thin film diamond Carbon 68 473–9

[136] [136] Rothschild M, Arnone C and Ehrlich D J 1986 Excimerlaser etching of diamond and hard carbon films by direct writing and optical projection J. Vac. Sci. Technol. B 4 310–4

[137] [137] Tezuka S and Yoshikawa M 1989 Cutting of diamond with YAG laser J. Jpn. Soc. Precis. Eng. 55 1863–68

[138] [138] Tokarev V N and Konov V I 1991 Light-induced polishing of diamond films Mater. Sci. Monogr. 73 249–55

[139] [139] Gloor S, Lüthy W, Weber H P, Pimenov S M, Ralchenko V G, Konov V I and Khomich A V 1999 UV laser polishing of thick diamond films for IR windows Appl. Surf. Sci. 138–139 135–9

[140] [140] Takayama N and Yan J W 2017 Laser irradiation responses of a single-crystal diamond produced by different crystal growth methods Appl. Sci. 7 815

[141] [141] Takayama N and Yan J W 2017 Mechanisms of microgroove formation on single-crystal diamond by a nanosecond pulsed laser J. Mater. Process. Technol. 243 299–311

[142] [142] Sudheer S K, Pillai V P M and Nayar V U 2007 Characterization of laser processing of single-crystal natural diamonds using micro-Raman spectroscopic investigations J. Raman Spectrosc. 38 427–35

[143] [143] Li W, Xiao D B, He H H, Hou Z Q and Wu X Z 2016 Single-crystal diamond micro-cupped resonators made by laser ablation Microsyst. Technol. 22 2603–10

[144] [144] Kononenko T V, Meier M, Komlenok M S, Pimenov S M, Romano V, Pashinin V P and Konov V I 2008 Microstructuring of diamond bulk by IR femtosecond laser pulses Appl. Phys. A 90 645–51

[145] [145] Kononenko T V, Komlenok M S, Pashinin V P, Pimenov S M, Konov V I, Neff M, Romano V and Lüthy W 2009 Femtosecond laser microstructuring in the bulk of diamond Diam. Relat. Mater. 18 196–9

[146] [146] Kononenko T V, Konov V I, Pimenov S M, Rossukanyi N M, Rukovishnikov A I and Romano V 2011 Three-dimensional laser writing in diamond bulk Diam. Relat. Mater. 20 264–8

[147] [147] Parks S M, Grote R R, Hopper D A and Bassett L C 2018 Fabrication of (111)-faced single-crystal diamond plates by laser nucleated cleaving Diam. Relat. Mater. 84 20–25

[148] [148] Pimenov S M, Neuenschwander B, J?ggi B and Romano V 2014 Effect of crystal orientation on picosecond-laser bulk microstructuring and Raman lasing in diamond Appl. Phys. A 114 1309–19

[149] [149] Komlenok M, Pashinin V, Sedov V and Konov V 2022 Femtosecond and nanosecond laser polishing of rough polycrystalline diamond Laser Phys. 32 084003

[150] [150] Naamoun M, Tallaire A, Silva F, Achard J, Doppelt P and Gicquelet A 2012 Etch-pit formation mechanism induced on HPHT and CVD diamond single crystals by H2/O2 plasma etching treatment: part of topical section on fundamentals and applications of diamond Phys. Status Solidi a 209 1715–20

[151] [151] Harb T, Kedzierski W and McConkey J W 2001 Production of ground state OH following electron impact on H2O J. Chem. Phys. 115 5507–12

[152] [152] Krstulovi′c N, Labazan I, Miloˇsevi′c S, Cvelbar U, Vesel A and Mozeticˇ M 2006 Optical emission spectroscopy characterization of oxygen plasma during treatment of a PET foil J. Phys. D: Appl. Phys. 39 3799