[1] Perepelkin K E. Oxidized (cyclized) polyacrylonitrile fibres—oxypan. A review[J]. Fibre Chemistry, 35, 409-416(2003).

[2] Serkov A T, Budnitskii G A, Radishevskii M B et al. Improving carbon fibre production technology[J]. Fibre Chemistry, 35, 117-121(2003).

[3] Heo G Y, Yoo Y J, Park S J. Effect of carbonization temperature on electrical conductivity of carbon papers prepared from petroleum pitch-coated glass fibers[J]. Journal of Industrial and Engineering Chemistry, 19, 1040-1043(2013).

[4] Jeong E, Kim J, Cho S H et al. New application of layered silicates for carbon fiber reinforced carbon composites[J]. Journal of Industrial and Engineering Chemistry, 17, 191-197(2011).

[5] Miao P K, Wu D M, Zeng K et al. Influence of electron beam pre-irradiation on the thermal behaviors of polyacrylonitrile[J]. Polymer Degradation and Stability, 95, 1665-1671(2010).

[6] Shin H K, Park M, Kang P H et al. Preparation and characterization of polyacrylonitrile-based carbon fibers produced by electron beam irradiation pretreatment[J]. Journal of Industrial and Engineering Chemistry, 20, 3789-3792(2014).

[7] WANG Zhongze, ZHONG Shan, ZHANG Bowen et al. Study on pre-oxidation thermal behavior of PAN precursor by comonomer modification[J]. New Chemical Materials, 45, 116-118(2017).

[8] Fu Z Y, Liu B J, Deng Y J et al. The suitable itaconic acid content in polyacrylonitrile copolymers used for PAN-based carbon fibers[J]. Journal of Applied Polymer Science, 133, 43919(2016).

[9] Park S, Kil H S, Choi D et al. Rapid stabilization of polyacrylonitrile fibers achieved by plasma-assisted thermal treatment on electron-beam irradiated fibers[J]. Journal of Industrial and Engineering Chemistry, 69, 449-454(2019).

[10] ZHANG Wenli. High dose rate electron beam irradiation effect of polyacrylonitrile fiber and subsequent effect on pre-oxidation[D](2020).

[11] WANG Chengguo, ZHU Bo[M]. Polyacrylonitrile based carbon fiber, 29-41(2011).

[12] Zhao Y Q, Wang C G, Wang Y X et al. Aqueous deposited copolymerization of acrylonitrile and itaconic acid[J]. Journal of Applied Polymer Science, 111, 3163-3169(2009).

[13] Simitzis J C, Georgiou P C. Functional group changes of polyacrylonitrile fibres during their oxidative, carbonization and electrochemical treatment[J]. Journal of Materials Science, 50, 4547-4564(2015).

[14] Zhang H L, Quan L, Shi F J et al. Rheological behavior of amino-functionalized multi-walled carbon nanotube/polyacrylonitrile concentrated solutions and crystal structure of composite fibers[J]. Polymers, 10, 186(2018).

[15] Kim D, Kim K S, Ko S et al. Assessment of geotechnical variability of Songdo silty clay[J]. Engineering Geology, 133, 1-8(2012).

[16] Paiva M C, Kotasthane P, Edie D D et al. UV stabilization route for melt-processible PAN-based carbon fibers[J]. Carbon, 41, 1399-1409(2003).

[17] ZHANG Wangxi. Effect of itaconic acid on the structure and properties of pan precursor[J]. Acta Polymerica Sinica, 287-291(2000).

[18] Dalton S, Heatley F, Budd P M. Thermal stabilization of polyacrylonitrile fibres[J]. Polymer, 40, 5531-5543(1999).

[19] Fu Z Y, Gui Y, Liu S et al. Effects of an itaconic acid comonomer on the structural evolution and thermal behaviors of polyacrylonitrile used for polyacrylonitrile-based carbon fibers[J]. Journal of Applied Polymer Science, 131, 40834(2014).

[20] Yu M J, Wang C G, Zhao Y Q et al. Thermal properties of acrylonitrile/itaconic acid polymers in oxidative and nonoxidative atmospheres[J]. Journal of Applied Polymer Science, 1207-1212(2009).

[21] Zhang H L, Quan L, Gao A J et al. Thermal analysis and crystal structure of poly(acrylonitrile-Co-itaconic acid) copolymers synthesized in water[J]. Polymers, 12, 221(2020).

[22] Mittal J, Konno H, Inagaki M et al. Denitrogenation behavior and tensile strength increase during carbonization of stabilized pan fibers[J]. Carbon, 36, 1327-1330(1998).