[1] [1] ZHANG Y ZH, SHI L K, ZHANG P ZH, et al.. The newest advance laser rapid forming of metallic powders[J]. Rare Metal Materials and Engineering, 2000,29(6): 13-19. (in Chinese)

[2] [2] DINDA G P, DASGUPTA A K, J. MAZUMDER. Laser aided direct metal deposition of Inconel 625 superalloy[J]. Materials Science and Engineering, 2009,A(509):98-104.

[3] [3] BALLA V K, BOSE S, BANDYOPADBYAY A. Processing of bulk alumina ceramics using laser engineered net shaping[J]. Int. J. Appl. Ceram. Technol, 2008,5(3):234-242.

[4] [4] HONG L,WU G. Laser-based Manufacturing Technology[M]. Beijing: China Communications Press, 2008.(in Chinese)

[5] [5] LIANG J,WANG CH,LUAN X, et al.. Analysis on toughening mechanisms of different SiC particle reinforced thermal protective ceramics[J]. Rare Metal Materials and Engineering, 2009,38(Supp 2): 894-897. (in Chinese)

[6] [6] GACSI Z, KOVACS J, PIECZONKA T, et al.. Investigation of sintered and laser surface remelted Al-SiC composites[J]. Surface and Coatings Technology,2002,151-152:320-324.

[7] [7] YANG Y Q,WEN X ZH. Microstructure and performance of the SiC/Stainless steel composite coating produce by Nd:YAG laser cladding［J］. Chinese Journal of Lasers,2000,27(10):941-946. (in Chinese)

[8] [8] MAJUMDAR J D, KUMAR A, LI L. Direct laser cladding of SiC dispersed AISI 316L stainless steel[J]. Tribology International,2009,42(5):750-753.

[9] [9] SUN R L,GUO L X,DONG SH L. et al.. Study on microstructure of laser-clad NiCrBSi+TiC coating on the surface of titanium alloy[J]. Chinese Journal of Lasers, 2001,28(3):275-278. (in Chinese)

[10] [10] HUANG W D,LIN X,CHEN J, et al.. Laser Solid Forming[M].Xi’an: Northwest Institute of Technology Press,2007. (in Chinese)

[11] [11] SONG W L,ZHU B D,ZHANG J. et al.. The effects of expansion coefficient of laser cladding layer on cracking sensitivity[J]. Journal of Huazhong University of Science and Technology, 1999,27(SuppⅠ): 42-44. (in Chinese)

[12] [12] JIA CH G. Introduction to Ceramic Matrix Composites[M].Beijing: Metallurgical Industry Press,2002.(in Chinese)

[13] [13] ZHANG G J,JIN Z ZH. Toughening mechanisms of particulate composite ceramic[J].Journal of the Chinese Ceramic Society,1994,22(3):259-269. (in Chinese)