[1] [1] ZHOU Z H, DENG G S, LI L, et al. Chemical looping co-conversion of CH4 and CO2 using Fe2O3/Al2O3 pellets as both oxygen carrier and catalyst in a fluidized bed reactor［J］. Chemical Engineering Journal, 2022, 428: 132133.

[2] [2] WANG L, MA T Z, DAI S M, et al. Solar thermochemical CO2 splitting with doped perovskite LaCo0.7Zr0.3O3: thermodynamic performance and solar-to-fuel efficiency［J］. RSC Advances, 2020, 10(59): 35740-35752.

[3] [3] SHI X H, XUN Y M, DONG Y, et al. Analysis of biomimetic hierarchical porous structure regulating radiation field to improve solar thermochemical performance based on minimum Gibbs free energy［J］. International Journal of Hydrogen Energy, 2022, 47(5): 2832-2845.

[4] [4] QIN C L, YIN J J, FENG B, et al. Modelling of the calcination behaviour of a uniformly-distributed CuO/CaCO3 particle in Ca-Cu chemical looping［J］. Applied Energy, 2016, 164: 400-410.

[5] [5] BENITEZ-GUERRERO M, VALVERDE J M, SANCHEZ-JIMENEZ P E, et al. Calcium-Looping performance of mechanically modified Al2O3-CaO composites for energy storage and CO2 capture［J］. Chemical Engineering Journal, 2018, 334: 2343-2355.

[6] [6] ZHANG Z E, CAI J C, CHEN F, et al. Progress in enhancement of CO2 absorption by nanofluids: a mini review of mechanisms and current status［J］. Renewable Energy, 2018, 118: 527-535.

[7] [7] ZHANG S A, WANG X E, MAO Z Z, et al. Effect of calcination condition on the performance of iron ore in chemical-looping combustion［J］. Fuel Processing Technology, 2020, 203: 106395.

[8] [8] SUN H, LI Y J, BIAN Z G, et al. Thermochemical energy storage performances of Ca-based natural and waste materials under high pressure during CaO/CaCO3 cycles［J］. Energy Conversion and Management, 2019, 197: 111885.

[9] [9] FENG J Q, GUO H X, WANG S P, et al. Fabrication of multi-shelled hollow Mg-modified CaCO3 microspheres and their improved CO2 adsorption performance［J］. Chemical Engineering Journal, 2017, 321: 401-411.

[10] [10] QIN C L, HE D L, ZHANG Z H, et al. The consecutive calcination/sulfation in calcium looping for CO2 capture: particle modeling and behaviour investigation［J］. Chemical Engineering Journal, 2018, 334: 2238-2249.

[11] [11] HE D L, QIN C L, MANOVIC V, et al. Study on the interaction between CaO-based sorbents and coal ash in calcium looping process［J］. Fuel Processing Technology, 2017, 156: 339-347.

[12] [12] SUN H, LI Y J, YAN X Y, et al. CaO/CaCO3 thermochemical heat storage performance of CaO-based micrometre-sized tubular composite［J］. Energy Conversion and Management, 2020, 222: 113222.

[13] [13] BLAMEY J, ANTHONY E J, WANG J, et al. The calcium looping cycle for large-scale CO2 capture［J］. Progress in Energy and Combustion Science, 2010, 36(2): 260-279.

[14] [14] SARRIN B, PEREJN A, SNCHEZ-JIMNEZ P E, et al. Role of calcium looping conditions on the performance of natural and synthetic Ca-based materials for energy storage［J］. Journal of CO2 Utilization, 2018, 28: 374-384.

[15] [15] LIU H, WU S F. Preparation of high sorption durability nano-CaO-ZnO CO2 adsorbent［J］. Energy & Fuels, 2019, 33(8): 7626-7633.

[16] [16] MA X T, LI Y J, ZHANG C X, et al. Development of Mn/Mg-copromoted carbide slag for efficient CO2 capture under realistic calcium looping conditions［J］. Process Safety and Environmental Protection, 2020, 141: 380-389.

[17] [17] TIAN S C, JIANG J G, ZHANG Z T, et al. Inherent potential of steelmaking to contribute to decarbonisation targets via industrial carbon capture and storage［J］. Nature Communications, 2018, 9: 4422.

[18] [18] HE S C, HU Y C, HU T D, et al. Investigation of CaO-based sorbents derived from eggshells and red mud for CO2 capture［J］. Journal of Alloys and Compounds, 2017, 701: 828-833.

[19] [19] ZHANG Y Q, HE L, MA A H, et al. CaO-based sorbent derived from lime mud and bauxite tailings for cyclic CO2 capture［J］. Environmental Science and Pollution Research, 2018, 25(28): 28015-28024.

[20] [20] MA A H, JIA Q M, SU H Y, et al. Study of CO2 cyclic absorption stability of CaO-based sorbents derived from lime mud purified by sucrose method［J］. Environmental Science and Pollution Research, 2016, 23(3): 2530-2536.

[21] [21] LI Y J, SUN R Y, LIU C T, et al. CO2 capture by carbide slag from chlor-alkali plant in calcination/carbonation cycles［J］. International Journal of Greenhouse Gas Control, 2012, 9: 117-123.

[22] [22] CHENG J, ZHOU J H, LIU J Z, et al. Physicochemical characterizations and desulfurization properties in coal combustion of three calcium and sodium industrial wastes［J］. Energy & Fuels, 2009, 23(5): 2506-2516.

[23] [23] GU B J, ZHANG Y Q, PUDUKUDY M, et al. Study and kinetic analysis of calcined carbide slag doped with silicon nitride for cyclic CO2 capture［J］. Materials Chemistry and Physics, 2021, 259: 124016.

[24] [24] YAN X Y, LI Y J, MA X T, et al. CO2 capture by a novel CaO/MgO sorbent fabricated from industrial waste and dolomite under calcium looping conditions［J］. New Journal of Chemistry, 2019, 43(13): 5116-5125.

[25] [25] PRIETO C, COOPER P, FERNNDEZ A I, et al. Review of technology: thermochemical energy storage for concentrated solar power plants［J］. Renewable and Sustainable Energy Reviews, 2016, 60: 909-929.

[26] [26] SARRIN B, PEREJN A, SNCHEZ-JIMNEZ P E, et al. Calcination under low CO2 pressure enhances the calcium looping performance of limestone for thermochemical energy storage［J］. Chemical Engineering Journal, 2021, 417: 127922.

[27] [27] CHEN J A, DUAN L B, SUN Z K. Review on the development of sorbents for calcium looping［J］. Energy & Fuels, 2020, 34(7): 7806-7836.

[28] [28] LUO T, LIU S L, LUO C, et al. Effect of different organic compounds on the preparation of CaO-based CO2 sorbents derived from wet mixing combustion synthesis［J］. Chinese Journal of Chemical Engineering, 2021, 36: 157-169.

[29] [29] ZHANG C, LI Y. Characteristics of simultaneous SO2/NO removal by CaO/bio-char under fluidization at constant heating rate［J］. Clean Coal Technology, 2021, 2: 246-252.

[30] [30] SNCHEZ JIMNEZ P E, PEREJN A, BENTEZ GUERRERO M, et al. High-performance and low-cost macroporous calcium oxide based materials for thermochemical energy storage in concentrated solar power plants［J］. Applied Energy, 2019, 235: 543-552.

[31] [31] HU Y C, LIU W Q, CHEN H Q, et al. Screening of inert solid supports for CaO-based sorbents for high temperature CO2 capture［J］. Fuel, 2016, 181: 199-206.

[32] [32] OBERMEIER J, SAKELLARIOU K G, TSONGIDIS N I, et al. Material development and assessment of an energy storage concept based on the CaO-looping process［J］. Solar Energy, 2017, 150: 298-309.

[33] [33] SUN H, LI Y J, YAN X Y, et al. Thermochemical energy storage performance of Al2O3/CeO2 co-doped CaO-based material under high carbonation pressure［J］. Applied Energy, 2020, 263: 114650.

[34] [34] LI Y J, SU M Y, XIE X, et al. CO2 capture performance of synthetic sorbent prepared from carbide slag and aluminum nitrate hydrate by combustion synthesis［J］. Applied Energy, 2015, 145: 60-68.

[35] [35] BAI S B, SUN J A, ZHOU Z J, et al. Structurally improved, TiO2-incorporated, CaO-based pellets for thermochemical energy storage in concentrated solar power plants［J］. Solar Energy Materials and Solar Cells, 2021, 226: 111076.

[36] [36] BENITEZ-GUERRERO M, VALVERDE J M, PEREJON A, et al. Low-cost Ca-based composites synthesized by biotemplate method for thermochemical energy storage of concentrated solar power［J］. Applied Energy, 2018, 210: 108-116.

[37] [37] CHEN X Y, JIN X G, LIU Z M, et al. Experimental investigation on the CaO/CaCO3 thermochemical energy storage with SiO2 doping［J］. Energy, 2018, 155: 128-138.

[38] [38] KHOSA A A, YAN J, ZHAO C Y. Investigating the effects of ZnO dopant on the thermodynamic and kinetic properties of CaCO3/CaO TCES system［J］. Energy, 2021, 215: 119132.

[39] [39] WANG J S, MANOVIC V, WU Y H, et al. A study on the activity of CaO-based sorbents for capturing CO2 in clean energy processes［J］. Applied Energy, 2010, 87(4): 1453-1458.

[40] [40] MA X T, LI Y J, DUAN L B, et al. CO2 capture performance of calcium-based synthetic sorbent with hollow core-shell structure under calcium looping conditions［J］. Applied Energy, 2018, 225: 402-412.

[41] [41] CHOI D, SHIN J, PARK Y. Effects of CaCl2 on cyclic carbonation-calcination kinetics of CaO-based composite for potential application to solar thermochemical energy storage［J］. Chemical Engineering Science, 2021, 230: 116207.

[42] [42] LI L Y, KING D L, NIE Z M, et al. Magnesia-stabilized calcium oxide absorbents with improved durability for high temperature CO2 capture［J］. Industrial & Engineering Chemistry Research, 2009, 48(23): 10604-10613.

[43] [43] VALVERDE J M, SANCHEZ-JIMENEZ P E, PEREZ-MAQUEDA L A. Ca-looping for postcombustion CO2 capture: a comparative analysis on the performances of dolomite and limestone［J］. Applied Energy, 2015, 138: 202-215.

[44] [44] WANG W Y, LIU W Q, SUN J A, et al. Reactivation of CaO-based sorbents via multi-acidification under N2 or oxy-fuel (with and without SO2) calcination conditions［J］. Fuel, 2019, 244: 13-21.

[45] [45] HU Y C, LIU W Q, SUN J A, et al. Structurally improved CaO-based sorbent by organic acids for high temperature CO2 capture［J］. Fuel, 2016, 167: 17-24.

[46] [46] GENG Y Q, GUO Y X, FAN B A, et al. Research progress of calcium-based adsorbents for CO2 capture and anti-sintering modification［J］. Journal of Fuel Chemistry and Technology, 2021, 49(7): 998-1013.

[47] [47] CHEN H C, ZHAO C S, CHEN M L, et al. CO2 uptake of modified calcium-based sorbents in a pressurized carbonation-calcination looping［J］. Fuel Processing Technology, 2011, 92(5): 1144-1151.

[48] [48] LI Y J, ZHAO C S, DUAN L B, et al. Cyclic calcination/carbonation looping of dolomite modified with acetic acid for CO2 capture［J］. Fuel Processing Technology, 2008, 89(12): 1461-1469.

[49] [49] LI Y J, ZHAO C S, CHEN H C, et al. Modified CaO-based sorbent looping cycle for CO2 mitigation［J］. Fuel, 2009, 88(4): 697-704.

[50] [50] LI Y, ZHAO C, CHEN H, et al. Enhancement of Ca-based sorbent multicyclic behavior in Ca looping process for CO2 separation［J］. Chemical Engineering & Technology, 2009, 32(4): 548-555.

[51] [51] SUN C Y, YAN X Y, LI Y J, et al. Coupled CO2 capture and thermochemical heat storage of CaO derived from calcium acetate［J］. Greenhouse Gases: Science and Technology, 2020, 10(5): 1027-1038.

[52] [52] LI Z H, WANG Y, XU K, et al. Effect of steam on CaO regeneration, carbonation and hydration reactions for CO2 capture［J］. Fuel Processing Technology, 2016, 151: 101-106.

[53] [53] LAN P Q, WU S F. Synthesis of a porous nano-CaO/MgO-based CO2 adsorbent［J］. Chemical Engineering & Technology, 2014, 37(4): 580-586.

[54] [54] ALVAREZ D, ABANADES J C. Pore-size and shape effects on the recarbonation performance of calcium oxide submitted to repeated calcination/recarbonation cycles［J］. Energy & Fuels, 2005, 19(1): 270-278.