[1] Yu Y C, Wang C M, Yu S F. Microstructures and property of butt laser joints of aluminium alloy 5A06 sheets with filler[J]. Laser Technology, 34, 34-36(2010).

[2] He Y Z, Wang D P, Wang Y et al. Correction of buckling distortion by ultrasonic shot peening treatment for 5A06 aluminum alloy welded structure[J]. Transactions of Nonferrous Metals Society of China, 26, 1531-1537(2016).

[3] Li Y J, Qin F M, Liu C R et al. Flow law, microstructure and corrosion behavior of friction stir welded 5A06 alloy[J]. Rare Metal Materials and Engineering, 47, 2353-2359(2018). http://www.sciencedirect.com/science/article/pii/S1875537218301917

[4] Qin Z H, Xu B T, Li B Y et al[J]. Research on high temperature gas bulging forming of aluminum alloy 5A06 for thin wall spherical head Aerospace Manufacturing Technology, 2019, 7-11, 31.

[5] Wang J S, Shu L S. Laser cladding remanufacturing and repair of agricultural tractor spindle[J]. Laser & Optoelectronics Progress, 57, 071404(2020).

[6] Ren Z H, Wu M P, Cui C et al. Effects of temperature field and CeO2/TiO2 on material phase transition in laser cladding[J]. Chinese Journal of Lasers, 46, 0802006(2019).

[7] Lai J, Lu Y Y, Zhang H et al. Liquation cracks in superalloys repaired by low-heat input pulsed laser[J]. Chinese Journal of Lasers, 46, 0402011(2019).

[8] Li Y D, Dong G, Yao J H. Microstructure evolution of heat-affected zones of 28CrMoNiV steel repaired by lasers[J]. Chinese Journal of Lasers, 43, 0802009(2016).

[9] Liu F G, Lin X, Song K et al. Microstructure and mechanical properties of laser forming repaired 300M steel[J]. Acta Metallurgica Sinica, 53, 325-334(2017).

[10] Qi H B, Xu Q G, Zhao Y Q et al. Study on realization method of automatic repair wear rail by laser cladding[J]. Journal of Mechanical Engineering, 53, 160-165(2017).

[11] He L, Wang X L, Tan H et al. Research status in microstructure and property of laser cladding coatings on aluminum alloys surface[J]. Hot Working Technology, 45, 28-33(2016).

[12] Zhang X L, Zhang K M, Ma J X et al. Research status of ceramic composite coating on aluminium alloy surface by laser cladding[J]. Hot Working Technology, 45, 23-26, 30(2016).

[13] [13] Fernández MR, GarcíaA, Cuetos JM, et al., 2015, 324/325: 80- 89.

[14] Sušnik J, Grum J, Šturm R. Effect of pulse laser energy density on TiC cladding of aluminium substrate[J]. Tehnicki vjesnik, 22, 1553-1560(2015).

[15] Li Y X, Zhang P F, Bai P K et al. Microstructure and properties of Ti/TiBCN coating on 7075 aluminum alloy by laser cladding[J]. Surface and Coatings Technology, 334, 142-149(2018).

[16] Qin L Y, Pang S, Yang G et al. Microstructure and mechanical property analysis of ZL114A aluminum alloy repaired by laser deposition[J]. Chinese Journal of Lasers, 43, 1202009(2016).

[17] Xu L D. Study on microstructure and properties of welding joint of laser repair of high-strength aluminum alloy[D]. Chengdu: Southwest Jiaotong University(2018).

[18] Shi Y, Ni C, Liu J et al. Microstructure and properties of laser clad high-entropy alloy coating on aluminium[J]. Materials Science and Technology, 34, 1239-1245(2018).

[19] Quazi M M, Fazal M A. Haseeb A S M A, et al. Laser-based surface modifications of aluminum and its alloys[J]. Critical Reviews in Solid State and Materials Sciences, 41, 106-131(2016).

[20] Xu F, Li X Y, Yang J et al[J]. Laser welding process of 5A06 aluminum alloy with filler wire Welding & Joining, 2008, 26-28, 70.

[21] Xu F, Chen L, Gong S L et al. Microstructure and mechanical properties of laser welding 5A06 aluminum with filling wire[J]. Applied Laser, 29, 83-86(2009).

[22] Katsas S, Nikolaou J, Papadimitriou G. Microstructural changes accompanying repair welding in 5xxx aluminium alloys and their effect on the mechanical properties[J]. Materials & Design, 27, 968-975(2006).

[23] Wu J, Wang X Q, Wang W et al. Microstructure and strength of selectively laser melted AlSi10Mg[J]. Acta Materialia, 117, 311-320(2016).

[24] Li W, Li S, Liu J et al. Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: microstructure evolution, mechanical properties and fracture mechanism[J]. Materials Science and Engineering: A, 663, 116-125(2016).

[25] Brandl E, Heckenberger U, Holzinger V et al. Additive manufactured AlSi10Mg samples using selective laser melting (SLM): microstructure, high cycle fatigue, and fracture behavior[J]. Materials & Design, 34, 159-169(2012).