[1] GAO W, IBARAKI S, DONMEZ M A et al. Machine tool calibration： Measurement， modeling， and compensation of machine tool errors[J]. International Journal of Machine Tools and Manufacture, 187, 104017(2023).

[2] ZHANG Z, JIANG F, LUO M et al. Geometric error measuring， modeling， and compensation for CNC machine tools： a review[J]. Chinese Journal of Aeronautics, 37, 163-198(2024).

[3] CHENG T, XIANG S T, ZHANG H N et al. New machining test for identifying geometric and thermal errors of rotary axes for five-axis machine tools[J]. Measurement, 223, 113748(2023).

[4] JI Z P, TIAN CH M, GUO SH J. Research status and prospect of geometric error of CNC machine tools[J]. Aeronautical Manufacturing Technology, 64, 65-77(2021).

     季泽平, 田春苗, 郭世杰. 数控机床几何误差研究现状与展望[J]. 航空制造技术, 64, 65-77(2021).

[5] IBARAKI S, KNAPP W. Indirect measurement of volumetric accuracy for three-axis and five-axis machine tools： a review[J]. International Journal of Automation Technology, 6, 110-124(2012).

[6] RUAN D W, MAO J, LIU G et al. A method for error identification of rotation axes of dual-five-axis CNC milling machines[J]. China Mechanical Engineering, 31, 1548-1554(2020).

     阮大文, 茅健, 刘钢. 双五轴数控铣削机床旋转轴误差辨识方法[J]. 中国机械工程, 31, 1548-1554(2020).

[7] IBARAKI S, OYAMA C, OTSUBO H. Construction of an error map of rotary axes on a five-axis machining center by static R-test[J]. International Journal of Machine Tools and Manufacture, 51, 190-200(2011).

[8] JIANG X G, CRIPPS R J. A method of testing position independent geometric errors in rotary axes of a five-axis machine tool using a double ball bar[J]. International Journal of Machine Tools and Manufacture, 89, 151-158(2015).

[9] 李想, 刘焕牢, 王宇林. 一种五轴机床旋转轴位置无关几何误差辨识方法[J]. 中国机械工程, 1-10(2025). https：//kns.cnki.net/KCMS/detail/detail.aspx？filename=ZGJX 2025022500B&dbname=CJFD&dbcode=CJFQ.

     LI X, LIU H L, WANG Y L et al. Method for identify position-independent geometric error of rotating shaft of five-axis machine tool[J]. China Mechanical Engineering, 1-10(2025). https：//kns.cnki.net/KCMS/detail/detail.aspx？filename=ZGJX2025022500B&dbname=CJFD&dbcode=CJFQ.）

[10] XIANG S T, ALTINTAS Y. Modeling and compensation of volumetric errors for five-axis machine tools[J]. International Journal of Machine Tools and Manufacture, 101, 65-78(2016).

[11] DENG M, LI H M, XIANG S T et al. Geometric errors identification considering rigid-body motion constraint for rotary axis of multi-axis machine tool using a tracking interferometer[J]. International Journal of Machine Tools and Manufacture, 158, 103625(2020).

[12] PI SH W, LIU Q, SUN P P. Geometric error detection for rotary feed drive based on laser interferometer[J]. Chinese Journal of Scientific Instrument, 38, 2484-2491(2017).

     皮世威, 刘强, 孙鹏鹏. 基于激光干涉仪的旋转轴误差快速检定方法[J]. 仪器仪表学报, 38, 2484-2491(2017).

[13] ZHUANG Z X, XU K, ZHANG S K et al. Sensitivity analysis of inverse multilateration based on tracking interferometer measurement for a bi-rotary head five-axis machine tool[J]. Measurement, 222, 113603(2023).

[14] IBARAKI S, IRITANI T, MATSUSHITA T. Calibration of location errors of rotary axes on five-axis machine tools by on-the-machine measurement using a touch-trigger probe[J]. International Journal of Machine Tools and Manufacture, 58, 44-53(2012).

[15] IBARAKI S, IRITANI T, MATSUSHITA T. Error map construction for rotary axes on five-axis machine tools by on-the-machine measurement using a touch-trigger probe[J]. International Journal of Machine Tools and Manufacture, 68, 21-29(2013).

[16] ONISHI S, IBARAKI S, KATO T et al. A self-calibration scheme to monitor long-term changes in linear and rotary axis geometric errors[J]. Measurement, 196, 111183(2022).

[17] MAYER J R R. Application of the adaptive Monte Carlo method in a five-axis machine tool calibration uncertainty estimation including the thermal behavior[J]. Precision Engineering, 53, 17-25(2018).

[18] 叶建华, 高诚辉, 江吉彬. 旋转台几何误差的在机测量与辨识[J]. 仪器仪表学报, 36, 2804-2811(2015).

     YE J H, GAO CH H, JIANG J B. On-machine measurement and identification for the geometric errors of rotary table[J]. Chinese Journal of Scientific Instrument, 36, 2804-2811(2015).

[19] IBARAKI S, OKUMURA R. A machining test to evaluate thermal influence on the kinematics of a five-axis machine tool[J]. International Journal of Machine Tools and Manufacture, 163, 103702(2021).

[20] AIA/NAS. NAS 979 Uniform cutting tests—nas series metal cutting equipment specifications[J]. AIA/NAS-NAS979(1969).

[21] IBARAKI S, SAWADA M, MATSUBARA A et al. Machining tests to identify kinematic errors on five-axis machine tools[J]. Precision Engineering, 34, 387-398(2010).

[22] IBARAKI S. A machining test to calibrate rotary axis error motions of five-axis machine tools and its application to thermal deformation test[J]. International Journal of Machine Tools and Manufacture, 86, 81-88(2014).

[23] ZHANG H N, XIANG S T, LIU C et al. Reverse identification of dynamic and static motion errors for five-axis machine based on specimen feature decomposition[J]. ISA Transactions, 134, 302-311(2023).

[24] CHEN K J, XIANG S T, CHENG T et al. A new machining test to identify position-independent geometric errors of rotary axes for five-axis machine tools[J]. The International Journal of Advanced Manufacturing Technology, 132, 4903-4913(2024).

[25] CHENG T, XIANG S T, ZHANG H N et al. Geometric error identification of rotary axes based on misaligned tower-shaped artefact[J]. Optics and Precision Engineering, 31, 3125-3134(2023).

     程涛, 项四通, 张海南. 基于错位塔形工件的旋转轴几何误差辨识[J]. 光学 精密工程, 31, 3125-3134(2023).

[26] [standard](2020).

[27] [standard](2015).