[1] ZOCCA A, COLOMBO P, GOMES C M et al. Additive manufacturing of ceramics: issues, potentialities, and opportunities[J]. Journal of the American Ceramic Society(2015).

[2] BAUX A, JACQUES S, ALLEMAND A et al. Complex geometry macroporous SiC ceramics obtained by 3D-printing, polymer impregnation and pyrolysis (PIP) and chemical vapor deposition (CVD)[J]. Journal of the European Ceramic Society(2021).

[3] SHEN T, XIONG H, LI Z et al. Fused deposition fabrication of high-quality zirconia ceramics using granular feedstock[J]. Ceramics International(2021).

[4] CHEN A, SU J, LI Y et al. 3D/4D printed bio-piezoelectric smart scaffolds for next-generation bone tissue engineering[J]. International Journal of Extreme Manufacturing, 032007(2023).

[5] SHAHZAD A, LAZOGLU I. Direct ink writing (DIW) of structural and functional ceramics: recent achievements and future challenges[J]. Composites Part B: Engineering(2021).

[6] JIANG Q, YANG D, YUAN H et al. Fabrication and properties of Si₂N₂O-Si₃N₄ ceramics via direct ink writing and low-temperature sintering[J]. Ceramics International(2022).

[7] HOSSAIN S S, LU K. Recent progress of alumina ceramics by direct ink writing: ink design, printing and post-processing[J]. Ceramics International(2023).

[8] TANG J, CHANG H, GUO X et al. Preparation of carbon fiber- reinforced SiC ceramics by stereolithography and secondary silicon infiltration[J]. Ceramics International(2022).

[9] BAI X, DING G, ZHANG K et al. Stereolithography additive manufacturing and sintering approaches of SiC ceramics[J]. Open Ceramics(2021).

[10] HE R, ZHOU N, ZHANG K et al. Progress and challenges towards additive manufacturing of SiC ceramic[J]. Journal of Advanced Ceramics(2021).

[11] HASSANIN H, ESSA K, ELSHAER A et al. Micro-fabrication of ceramics: additive manufacturing and conventional technologies[J]. Journal of Advanced Ceramics(2021).

[12] CHEN X, YIN J, HUANG L et al. Microstructural tailoring, mechanical and thermal properties of SiC composites fabricated by selective laser sintering and reactive melt infiltration[J]. Journal of Advanced Ceramics(2023).

[13] NGO T D, KASHANI A, IMBALZANO G et al. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges[J]. Composites Part B: Engineering(2018).

[14] MEI H, YAN Y, FENG L et al. First printing of continuous fibers into ceramics[J]. Journal of the American Ceramic Society(2019).

[15] LI F F, MA N N, CHEN J et al. SiC ceramic mirror fabricated by additive manufacturing with material extrusion and laser cladding[J]. Additive Manufacturing(2022).

[16] WEN J, ZENG T, PAN X et al. Effect of solid loading and carbon additive on microstructure and mechanical properties of 3D-printed SiC ceramic[J]. International Journal of Applied Ceramic Technology(2022).

[17] XIONG H, CHEN H, ZHAO L et al. SiC_w/SiC_p reinforced 3D-SiC ceramics using direct ink writing of polycarbosilane-based solution: microstructure, composition and mechanical properties[J]. Journal of the European Ceramic Society(2019).

[18] XIA Y, LU Z, CAO J et al. Microstructure and mechanical property of C_f/SiC core/shell composite fabricated by direct ink writing[J]. Scripta Materialia(2019).

[19] LIU Y, CHENG Y, MA D et al. Continuous carbon fiber reinforced ZrB₂-SiC composites fabricated by direct ink writing combined with low-temperature hot-pressing[J]. Journal of the European Ceramic Society(2022).

[20] LI Z, CHEN Z, LIU J et al. Additive manufacturing of lightweight and high-strength polymer-derived SiOC ceramics[J]. Virtual and Physical Prototyping(2020).

[21] ECKEL Z C, ZHOU C, MARTIN J H et al. Additive manufacturing of polymer-derived ceramics[J]. Science(2016).

[22] FU S, ZHU M, ZHU Y. Organosilicon polymer-derived ceramics: an overview[J]. Journal of Advanced Ceramics(2019).

[23] TANG J, GUO X, CHANG H et al. The preparation of SiC ceramic photosensitive slurry for rapid stereolithography[J]. Journal of the European Ceramic Society(2021).

[24] LIU T, YANG L, CHEN Z et al. Effects of SiC content on the microstructure and mechanical performance of stereolithography-based SiC ceramics[J]. Journal of Materials Research and Technology(2023).

[25] FU X, HUCK D, MAKEIN L et al. Effect of particle shape and size on flow properties of lactose powders[J]. Particuology(2012).

[26] LU H, GUO X, LIU Y et al. Effect of particle size on flow mode and flow characteristics of pulverized coal[J]. KONA Powder and Particle Journal(2015).

[27] JULIANO P, MUHUNTHAN B, BARBOSA-CÁNOVAS G V. Flow and shear descriptors of preconsolidated food powders[J]. Journal of Food Engineering(2006).

[28] KRANTZ M, ZHANG H, ZHU J. Characterization of powder flow: static and dynamic testing[J]. Powder Technology(2009).

[29] SCHÜSSELE A, BAUER-BRANDL A. Note on the measurement of flowability according to the European Pharmacopoeia[J]. International Journal of Pharmaceutics(2003).

[30] WU S, YANG L, WANG C et al. Si/SiC ceramic lattices with a triply periodic minimal surface structure prepared by laser powder bed fusion[J]. Additive Manufacturing(2022).

[31] CHEN X, YIN J, LIU X et al. Effect of laser power on mechanical properties of SiC composites rapidly fabricated by selective laser sintering and direct liquid silicon infiltration[J]. Ceramics International(2022).

[32] POPPER P, DAVIES D G S. The preparation and properties of self-bonded silicon carbide[J]. Powder Metallurgy(1961).

[33] HAYUN S, FRAGE N, DARIEL M P. The morphology of ceramic phases in B_xC-SiC-Si infiltrated composites[J]. Journal of Solid State Chemistry(2006).

[37] LI S, ZHANG Y, HAN J et al. Random chopped fibers in reaction bonded SiC composite: morphology, etching and reinforcing properties[J]. Materials Science and Engineering: A(2012).

[39] WU Q, YANG C, ZHANG H et al. Fabrication and characterization of reaction-bonded silicon carbide with poly(methyl methacrylate) as pore-forming agent[J]. Ceramics International(2013).

[40] LIU K, WANG J, WU T et al. Effects of carbon content on microstructure and mechanical properties of SiC ceramics fabricated by SLS/RMI composite process[J]. Ceramics International, 22015(2020).

[41] PELANCONI M, COLOMBO P, ORTONA A. Additive manufacturing of silicon carbide by selective laser sintering of PA12 powders and polymer infiltration and pyrolysis[J]. Journal of the European Ceramic Society(2021).

[42] ZHONG H, WANG Z, ZHOU H et al. Properties and microstructure evolution of C_f/SiC composites fabricated by polymer impregnation and pyrolysis (PIP) with liquid polycarbosilane[J]. Ceramics International(2017).

[43] ZOU Y, LI C H, TANG Y et al. Preform impregnation to optimize the properties and microstructure of RB-SiC prepared with laser sintering and reactive melt infiltration[J]. Journal of the European Ceramic Society(2020).

[44] ZHAO H, LIU W, LV X et al. β-SiC nano-particles enhanced thermal conductivity of pressureless solid-phase sintering SiC[J]. Ceramics International(2024).

[45] WANG K, YIN J, CHEN X et al. Microstructure and properties of liquid phase sintered SiC ceramics fabricated via selective laser printing and precursor impregnation and pyrolysis[J]. Ceramics International(2024).

[46] XING Y, WU H, LIU X et al. Grain Composition on solid-state-sintered SiC ceramics[J]. Journal of Inorganic Materials(2018).

[47] SHAFFER P T B. The SiC phase in the system SiC-B₄C-C[J]. Materials Research Bulletin(1969).

[48] MADDRELL E R. Pressureless sintering of silicon carbide[J]. Journal of Materials Science Letters(1987).

[49] WANG K, YIN J, CHEN X et al. Effect of particle grading on properties of silicon carbide ceramics by selective laser printing combined with solid phase sintering at atmospheric pressure[J]. Journal of Inorganic Materials(2024).

[51] KINGERY W D. Densification during sintering in the presence of a liquid phase. I. Theory[J]. Journal of Applied Physics(1959).

[52] GERMAN R M, SURI P, PARK S J. Review: liquid phase sintering[J]. Journal of Materials Science(2009).

[53] BISWAS K, RIXECKER G, ALDINGER F. Gas pressure sintering of SiC sintered with rare-earth-(III)-oxides and their mechanical properties[J]. Ceramics International(2005).

[54] PEREVISLOV S N. Mechanism of liquid-phase sintering of silicon carbide and nitride with oxide activating additives[J]. Glass and Ceramics(2013).

[56] LIU R, WANG F, ZHANG J et al. Effects of CVI SiC amount and deposition rates on properties of SiC_f/SiC composites fabricated by hybrid chemical vapor infiltration (CVI) and precursor infiltration and pyrolysis (PIP) routes[J]. Ceramics International(2021).

[57] TERRANI K, JOLLY B, TRAMMELL M. 3D printing of high-purity silicon carbide[J]. Journal of the American Ceramic Society(2020).

[58] FU H, ZHU W, XU Z et al. Effect of silicon addition on the microstructure, mechanical and thermal properties of C_f/SiC composite prepared via selective laser sintering[J]. Journal of Alloys and Compounds(2019).

[59] WANG C, CHEN X, WANG Z et al. A novel mullite anti-gyroid/SiC gyroid ceramic metastructure based on digital light processing 3D printing with enhanced electromagnetic wave absorption and mechanical properties[J]. Journal of Advanced Ceramics(2024).

[60] LI F, ZHU M, CHEN J et al. High-strength and low-silicon SiC ceramics prepared by extrusion molding 3D printing[J]. Journal of the European Ceramic Society(2024).