[6] [6] LI X, WANG C, JIANG L, et al．Transient localized material properties changes by ultrafast laser pulse manipulation of electron dynamics in micro/nano manufacturing[C]．San Francisco: Mater. Res. Spring Meeting, 2011(1365): 3-8．

[7] [7] MAO S S, QUERE F, GUIZARD S, et al．Dynamics of femtosecond laser interactions with dielectrics[J]．Appl. Phys. A: Mater. Sci. & Process., 2004, 79(7): 1695-1709．

[8] [8] JIANG L, TSAI H L．Prediction of crater shaper in femtosecond laser ablation of dielectrics[J]．Appl. Phys. D, 2004, 37(10): 1492-1496．

[9] [9] SEZER K, LI L, SCHMIDT M, et al．Effect of beam angle on HAZ, recast and oxide layer characteristics in laser drilling of TBC nickel super alloys[J]．Int. J. Mach. Tool Manu., 2006, 46(15): 1972-1982．

[10] [10] LEIGH S, SEZER K, LI L, et al．Recast and oxide formation in laser-drilled acute holes in CMSX-4 nickel single-crystal superalloy[J]．Pro IMechE-Part B:J Engineering Manufacture, 2010, 224(B7): 1005-1016．

[13] [13] FOHL C, BREITLING D, DAUSINGER F．Precise drilling of steelwith ultra-short pulsed solid-state lasers[J]．Proc. SPIE, 2003(5121): 271-279．

[14] [14] STEPHEN L, ALLAN A, LENNY M．Comparison of ns and ps pulses for Si and glass micromachining applications[J]. Proc. SPIE, 2009(7193): 719322-1-10．

[15] [15] HERRMANN T, KLIMT B, SIEGEL F．Micromachining with picosecond laser pulses[2004-10-01]．http://www.industrial-lasers.com/articles/2004/10/micromachining-with-picosecond-laser-pulses.html．

[16] [16] GHOREISHI M, LOW D K Y, LI L．Comparative statistical analysis of hole taper and circularity in laser persussiondrilling[J]．International Journal of Machine Tools & Manufacture, 2002(42): 985-995．

[17] [17] LOW D K Y．Spatter and taper control in laser percussion drilling[D]．Manchester : University of Manchester Institute of Science and Technology(UMIST), 2001．

[18] [18] RUPESH GOYAL, AVANISH KUMAR DUBEY．Quality Improvement by parameter optimization in laser trepan drilling of superalloy sheet[J]．Mater. Manuf. Proc., 2014(29): 1410-1416．