[6] [6] ZHAI Z Y, WANG W J, MEI X S, et al. Percussion drilling on nickel-based alloy with thermal barrier coatings using femtosecond laser［J］. Optik, 2019, 194: 163066.

[7] [7] DAS D K, POLLOCK T M. Femtosecond laser machining of cooling holes in thermal barrier coated CMSX4 superalloy［J］. Journal of Materials Processing Technology, 2009, 209(15/16): 5661-5668.

[9] [9] QI H, LAI H K. Micromachining of metals and thermal barrier coatings using a 532nm nanosecond fiber laser［J］. Physics Procedia, 2012, 39: 603-612.

[10] [10] CHENG W L, LIU Y Z, WANG W Z, et al. Interface detection from laser drilling of air plasma-sprayed thermal barrier coatings by laser-induced breakdown spectroscopy［J］. Optics and Lasers in Engineering, 2021, 137: 106351.

[11] [11] WANG R J, DUAN W Q, WANG K D, et al. Computational and experimental study on hole evolution and delamination in laser drilling of thermal barrier coated nickel superalloy［J］. Optics and Lasers in Engineering, 2018, 107: 161-175.

[12] [12] WANG L, LI Z D, DING K Y, et al. Effects of TGO growth on the stress distribution and evolution of three-dimensional cylindrical thermal barrier coatings based on finite element simulations［J］. Ceramics International, 2022, 48(6): 7864-7875.

[13] [13] YANG L X, YANG F, LONG Y, et al. Evolution of residual stress in air plasma sprayed yttria stabilised zirconia thermal barrier coatings after isothermal treatment［J］. Surface and Coatings Technology, 2014, 251: 98-105.

[14] [14] ABUBAKAR A A, ARIF A F M, AKHTAR S S. Evolution of internal cracks and residual stress during deposition of TBC［J］. Ceramics International, 2020, 46(17): 26731-26753.

[17] [17] JIANG Y, XU B S, WANG H D, et al. Finite element modeling of residual stress around holes in the thermal barrier coatings［J］. Computational Materials Science, 2010, 49(3): 603-608.

[18] [18] GU L J, FAN X Z, ZHAO Y, et al. Influence of ceramic thickness on residual stress and bonding strength for plasma sprayed duplex thermal barrier coating on aluminum alloy［J］. Surface and Coatings Technology, 2012, 206(21): 4403-4410.

[19] [19] GUINARD C, MONTAY G, GUIPONT V, et al. Residual stress analysis of laser-drilled thermal barrier coatings involving various bond Coats［J］. Journal of Thermal Spray Technology, 2015, 24(1): 252-262.

[21] [21] BHARATISH A, NARASIMHA MURTHY H N, ADITYA G, et al. Evaluation of thermal residual stresses in laser drilled alumina ceramics using Micro-Raman spectroscopy and COMSOL Multiphysics［J］. Optics & Laser Technology, 2015, 70: 76-84.

[22] [22] YU Y Q, ZHOU L C, CAI Z B, et al. DD6 single-crystal superalloy with thermal barrier coating in femtosecond laser percussion drilling［J］. Optics & Laser Technology, 2021, 133: 106555.

[25] [25] FAN Z J, SUN X M, MEI X S, et al. Enhanced molten salt resistance by sidewall pores repair during fs laser drilling of a thermal barrier-coated superalloy［J］. Materials, 2019, 12(12): 1905.